Skip to main content

Patches and updates

ArcGIS Data Store 10.9 Reliability Enhancement Patch

Published: May 27, 2021

Summary

The ArcGIS Data Store 10.9 Reliability Enhancement Patch improves general reliability for relational, tile cache, and spatiotemporal big data stores.

Description

Esri® announces the ArcGIS Data Store 10.9 Reliability Enhancement Patch. This patch addresses reliability and availability issues with the relational, tile cache, and spatiotemporal big data stores. It improves consistency in the configuration of all data store types, improves reliability and data accuracy with upgrades for the spatiotemporal data store, and reliability for high availability configurations for the tile cache data store. It deals specifically with the issues listed below under Issues Addressed with this patch.

 

Issues Addressed with this patch

 

  • BUG-000139644 - Correct allocation when shrinking is enabled on data sources.
  • BUG-000139643 - Improve the process of validating permissions on directories during data store configuration.
  • BUG-000139642 - The listbackups command utility fails to display backups when run on machines other than the coordinator node.
  • BUG-000139641 - The tile cache data store does not fail over consistently.
  • BUG-000139639 - GeoEvent map services do not render correctly after upgrading from 10.8.1 when using hexagon or square aggregation.

 

Installing this patch on Windows

 

Installation Steps:

 

ArcGIS Data Store 10.9 must be installed before installing this patch. All command utilities must be run on the ArcGIS Data Store machine.

  1. Before installing the patch, use the backupdatastore command utility to make a backup of the relational, tile cache, and spatiotemporal big data stores.
  2. Download the appropriate file to a location other than your ArcGIS installation location.

    ArcGIS 10.9  
       
    ArcGIS Data Store ArcGIS-109-DS-RE-Patch.msp
         Checksum
         (SHA256)    		 89AD94A46CD7A00E8E69191B743A7F0BBB894D9DC5207A26D4546DE78A28023E
       

  3. Make sure you have write access to your ArcGIS installation location.
  4.  For the relational and tile cache data stores, configured in primary standby mode apply the patch on the primary data store machine first, followed by the standby. For the spatiotemporal big data store, and tile cache data store configured in cluster mode, order does not matter.
  5. Double-click ArcGIS-109-DS-RE-Patch.msp to start, and click Update to finish the setup process.
  6. Once the setup process finishes on the primary data store, double-click ArcGIS-109-DS-RE-Patch.msp to start, and click Update to finish the setup process on the standby machine, and other machines in the cluster in the case of the spatiotemporal big data store.
  7. For single-machine ArcGIS Data Store installations, double-click ArcGIS-109-DS-RE-Patch.msp to start and click Update to finish the setup process.

    NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation using the following command:

    msiexec.exe /p [location of Patch]\ ArcGIS-109-DS-RE-Patch.msp
     
  8. If you have GeoEvent map services and have already upgraded to ArcGIS Data Store 10.9 prior to applying the ArcGIS Data Store 10.9 Reliability Enhancement Patch, follow these additional steps on the spatiotemporal big data store to correct rendering issues specific to GeoEvent map services.

    1. Use the listdatasources utility found in the ArcGIS Data Store tools directory to list data sources associated with GeoEvent map services.
       listdatasources.bat

    2. Run the upgradedatasource utility and pass in the names found from listdatasources to correct the GeoEvent map service rendering issues.
       upgradedatasource.bat [datasource-name]

 

Installing this patch on Linux

 

Installation Steps:

 

ArcGIS Data Store 10.9 must be installed before installing this patch. All command utilities must be run on the ArcGIS Data Store machine.

Complete the following installation steps as the owner of the arcgis folder (also referred to as the ArcGIS installation owner).

  1. Before installing the patch, use the backupdatastore command utility to make a backup of the relational, tile cache, and spatiotemporal big data stores.
  2. Download the appropriate file to a location other than your ArcGIS installation location.


    ArcGIS 10.9  
       
    ArcGIS Data Store ArcGIS-109-DS-RE-Patch-linux.tar
         Checksum
         (SHA256)    		 7E31944A2E2BC98BA630DBAA397538BAEB2B0527A1FA046761E1D0E02F43CAFD

  3. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.
  4. For the relational and tile cache data stores configured in primary standby mode, apply the patch on the primary data store machine first, followed by the standby. For the spatiotemporal big data store, and tile cache data store configured in cluster mode, order does not matter.
  5. On the primary data store machine, extract the specified tar file by typing:

    % tar -xvf ArcGIS-109-DS-RE-Patch-linux.tar

  6. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

    Once the setup process finishes on the primary data store, repeat the process to install and run ./applypatch on the standby machine, and other machines in the cluster in the case of the spatiotemporal big data store.
  7. For single-machine ArcGIS Data Store installations, start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.
  8. If you have GeoEvent map services and have already upgraded to ArcGIS Data Store 10.9 prior to applying the ArcGIS Data Store 10.9 Reliability Enhancement Patch, follow these additional steps on the spatiotemporal big data store to correct rendering issues specific to GeoEvent map services.

    1. Use the listdatasources utility found in the ArcGIS Data Store tools directory to list data sources associated with GeoEvent map services.
       listdatasources.bat

    2. Run the upgradedatasource utility and pass in the names found from listdatasources to correct the GeoEvent map service rendering issues.
       upgradedatasource.bat [datasource-name]

 

Uninstalling this patch on Windows

 

To uninstall this patch on Windows, open the Windows Control Panel and navigate to installed programs. Make sure that "View installed updates" (upper left side of the Programs and Features dialog) is active. Select the patch name from the programs list and click Uninstall to remove the patch.

 

Uninstalling this patch on Linux

 

Uninstalling on Linux is only available on version 10.5.1 or higher. These instructions are specific to 10.7 and higher. To remove this patch, navigate to the <Product Installation Directory>/.Setup/qfe folder and run the following script as the ArcGIS Install owner:


./removepatch.sh

The removepatch.sh script allows you to uninstall previously installed patches or hot fixes. Use the -s status flag to get the list of installed patches or hot fixes ordered by date. Use the -q <QFE_ID> flag to remove patches or hot fixes in reverse chronological order by date they were installed. Type removepatch -h for usage help.


Patch Updates

Check the Esri Support Downloads page periodically for the availability of additional patches. New information about this patch will be posted here.

November 19, 2021 The windows setup(s) of this patch have been updated with new digital signatures. This change addresses the possible install error:

A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
 

How to identify which ArcGIS products are installed

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

Getting Help

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.


Download ID:7902

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options