漏洞
The Site Scan Flight for ArcGIS app using an M300 drone shows zero images captured throughout the whole flight, but the progress bar works correctly and images are captured as expected.
| 漏洞 ID 编号 | BUG-000157835 |
|---|---|
| 已提交 | April 26, 2023 |
| 上次修改时间 | July 31, 2024 |
| 适用范围 | Site Scan for ArcGIS |
| 找到的版本 | 4.5 |
| 操作系统 | Apple iPadOS |
| 操作系统版本 | 15.x |
| 状态 | Non-Reproducible |
附加信息
The relevant team has reviewed the flight logs and found no image callback during the flight. This means the Site Scan flight app is sending commands to take photos, but the camera is not sending feedback once a photo is taken. When the app does not receive feedback from the camera, this is usually an indication of a hardware issue, either with the camera or the gimbal connector. Please try the following troubleshooting steps: Use another drone and/or camera that is available. - Switch the P1 camera (Camera A), from which the issue happens, to another M300 (Drone B). - Fly a basic survey mission (no longer than 5 minutes) and confirm if this issue continues. If this issue occurs on the other drone, it is likely an issue with the gimbal connector. If there is no issue when swapping cameras, then do the following. - On the M300 (Drone A), use the other P1 camera (Camera B). - If the issue occurs on Drone A, then it is likely an issue with the gimbal connector on the drone's end.重现步骤
漏洞 ID: BUG-000157835
软件:
- Site Scan for ArcGIS
当漏洞状态发生变化时获得通知
发现关于本主题的更多内容
搜索相关信息
查找与此主题相关的培训
探索想法并提供反馈
获取来自 ArcGIS 专家的帮助
下载 Esri 支持应用程序