Erro
The Site Scan Flight for ArcGIS app using an M300 drone shows zero images captured throughout the whole flight, but the progress bar works correctly and images are captured as expected.
| Número de ID do Erro | BUG-000157835 |
|---|---|
| Enviado | April 26, 2023 |
| Última Modificação | July 31, 2024 |
| Aplica-se à | Site Scan for ArcGIS |
| Versão encontrada | 4.5 |
| Sistema Operacional | Apple iPadOS |
| Versão do Sistema Operacional | 15.x |
| Status | Non-Reproducible |
Informações Adicionais
The relevant team has reviewed the flight logs and found no image callback during the flight. This means the Site Scan flight app is sending commands to take photos, but the camera is not sending feedback once a photo is taken. When the app does not receive feedback from the camera, this is usually an indication of a hardware issue, either with the camera or the gimbal connector. Please try the following troubleshooting steps: Use another drone and/or camera that is available. - Switch the P1 camera (Camera A), from which the issue happens, to another M300 (Drone B). - Fly a basic survey mission (no longer than 5 minutes) and confirm if this issue continues. If this issue occurs on the other drone, it is likely an issue with the gimbal connector. If there is no issue when swapping cameras, then do the following. - On the M300 (Drone A), use the other P1 camera (Camera B). - If the issue occurs on Drone A, then it is likely an issue with the gimbal connector on the drone's end.Etapas para Reproduzir
ID do Erro: BUG-000157835
Software:
- Site Scan for ArcGIS
Seja notificado quando o status de um erro mudar
Descubra mais sobre este tema
Procurar por informações relacionadas
Encontre treinamento relacionado a este tópico
Explore idéias e forneça comentários
Obtenha ajuda de especialistas do ArcGIS
Baixe o Aplicativo de Suporte da Esri