Summary
Instructions provided describe how to use HyperTerminal for testing GPS connection communication parameters and cables. Instructions also describe how to verify that the GPS receiver is outputting data.
Procedure
Follow the steps below for GPS connection tests.
- Open HyperTerminal:
Start > Programs > Accessories > HyperTerminal
or
Start > Programs > Accessories > Communications > HyperTerminal. - Enter 'GPS Connect' for the connection name and select an icon. Click OK.
- Select the COM port where the GPS will connect. Click OK.
- Set the Baud Rate, Parity, and Stop bits to match the GPS receiver settings. Click OK.
- Verify data is being received from the GPS receiver in the HyperTerminal window. ASCII NMEA sentences should be legible. No data displayed or illegible information indicates a connection problem to the GPS receiver.