Bogue
Exporting to CAD does not support the creation of cells or shared cells.
| Numéro d’ID de bogue | NIM004746 |
|---|---|
| Envoi | October 10, 2006 |
| Dernière modification | April 2, 2025 |
| S’applique à | No Product Found |
| Version trouvée | 9.2 |
| Version de correction | 10.3.1 |
| Statut | Fixed |
Solution de contournement
There is a workaround, but the workaround may require access to AutoCAD, in addition to Microstation:1] In Microstation, save the seed file containing the CELL as an AutoCAD DWG2] In the attribute table for the point feature class to be exported, add the fields CadType, and RefName, both defined as text, with a length sufficient to accommodate the required values.CadType is calculated = "Insert"RefName is calculated to the name of the BLOCK, in this case "circle_G_2"3] run the Export to CAD tool. If run from within ArcMap, you must browse to the input data on disk. My experience is that the proces will fail if the input is displayed in ArcMap, and is selected using the dropdown arrow in the Export to CAD dialog.4] direct the output DWG file from the tool to a suitable location on the local hard drive.5] select the AutoCAD DWG file containing the BLOCK as the seed file and export.6] open the output DWG file in Microstation. The point will be symbolized with the chosen symbol. Save as a DGN, and be sure to Compress the DGN when saving to a verson 8 format. The point will be symbolized as a shared cell.Étapes pour reproduire
ID de bogue: NIM004746
Logiciel:
- No Product Found
Recevoir une notification lorsque le statut d’un bogue change
En savoir plus sur ce sujet
Rechercher des informations associées
Rechercher une formation sur ce sujet
Explorer des pistes et donner un avis
Obtenir de l’aide auprès des experts ArcGIS
Télécharger l’application Esri Support