Volver a los resultados

Be The First To Get Support Updates

Want to know about the latest technical content and software updates?

Volver al principio

ArcSDE 9.1 Service Pack 2

Resumen

ESRI announces ArcSDE 9.1 Service Pack 2. Please download and install this required Service Pack at your earliest convenience. This Service Pack contains all the fixes from ArcSDE 9.1 Service Pack 1 and some additional performance improvements and maintenance fixes.

Descripción

Issues Fixed with this Service Pack
Files Installed in this Service Pack

Installing this Service Pack
      Server
      — UNIX
      — Windows
      ArcSDE SDK
      — UNIX
      — Windows
      ESRI Products connecting to ArcSDE (Application and Direct Connect connections)
      — UNIX
      — Windows
How to identify which Service Pack is installed
Service Pack Updates
Getting Help

Important Note

A CD of this Service Pack is available for users who experience difficulties downloading the Service Pack from the web site. Simply fill out the Request a Service Pack CD order form.

Installing the Service Pack

ArcSDE 9.1 must be installed before you can install this Service Pack. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. If you have not yet applied the previous service pack, you do not have to do so before installing Service Pack 2 as it is cumulative and contains all fixes from the pervious service pack. If you already have a previous service pack installed, you may apply Service Pack 2 over it to update the required files. Install this Service Pack using your SDE user account.

REQUIRED INSTALL STEP: If you connect to ArcSDE 9.1 via an Application Server and Direct Connect connections using ArcGIS 9.1, ArcIMS 9.1, or ArcView GIS 3.3 with DBA 2.1g make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

Server Install for UNIX

UNIX Installation Notes:

To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.

ArcGIS Engine Runtime
ArcGIS Reader
ArcGIS Server
ArcIMS
ArcInfo Workstation
ArcSDE

Extract the tar file by typing:

% tar xvf PatchFinder.tar

Run the utility by typing:

% ./PatchFinder

Installation Steps:

IMPORTANT NOTE: If you've previously installed ArcSDE 9.1 General Update Patch 2 you only need to run steps 1, 3 and 4. This will ensure that the ESRI Patch reporting information is properly updated.

During installation, you can either save the original 9.1 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

Download the appropriate tar file to a location other than $SDEHOME:

DB2
HP-UX 64 sde91-sp2-db2-hp64.tar	33 MB
IBM sde91-sp2-db2-ibm.tar	40 MB
IBM64 sde91-sp2-db2-ibm64.tar	39 MB
Linux sde91-sp2-db2-lx.tar	32 MB
Solaris64 sde91-sp2-db2-slrs64.tar	47 MB

Informix
HP-UX sde91-sp2-inf-hp.tar	31 MB
IBM sde91-sp2-inf-ibm.tar	40 MB
Solaris sde91-sp2-inf-slrs.tar	45 MB

Oracle 8i
HP-UX sde91-sp2-ora8i-hp.tar	58 MB
IBM sde91-sp2-ora8i-ibm.tar	42 MB
Solaris sde91-sp2-ora8i-slrs.tar	47 MB
Tru64 sde91-sp2-ora8i-tru64.tar	43 MB

Oracle 9i
HP-UX 64 sde91-sp2-ora9i-hp64.tar	36 MB
IBM64 sde91-sp2-ora9i-ibm64.tar	41 MB
Linux sde91-sp2-ora9i-lx.tar	33 MB
Solaris sde91-sp2-ora9i-slrs.tar	47 MB
Solaris64 sde91-sp2-ora9i-slrs64.tar	49 MB
Tru64 sde91-sp2-ora9i-tru64.tar	43 MB

Oracle 10gR2
The ArcSDE 9.1 for Oracle10gR2 release contains all the fixes from this Service Pack and can be applied to either a 10gR1 or 10gR2 installation.

Stop your current ArcSDE service.

% sdemon -o shutdown

NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

# /usr/sbin/slibclean

(Optional) To list the libraries loaded into memory, as ROOT user, type:

# /usr/sbin/genkld

For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

Extract the specified tar file by typing:

% tar -xvf sde91-sp2-<Database>-<Platform>.tar

Start the installation by typing:

% ./applypatch

This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

(Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY PROCEDURE
CREATE ANY SEQUENCE
CREATE ANY TRIGGER
CREATE ANY VIEW
CREATE SESSION
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
SELECT ANY TABLE
UNLIMITED TABLESPACE

To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example (for details on using the sdesetup<dbms> command for your database, please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command):

% sdesetupora9i -o upgrade –u sde –p <SDE_Admin_password>

(Oracle only) After the upgrade completes, you may revoke the following permissions from the SDE user account:

ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY TRIGGER
CREATE ANY VIEW
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
Start your service again.

% sdemon -o start

Server Install for Windows

Windows Installation Notes:

It is important to keep the all versions of ArcGIS products installed on a machine in sync to avoid any software conflicts.

To find out what products are currently installed on your machine, download the ServicePackFinder91.exe utility and run it from your local machine. This utility provides a report detailing which ArcGIS products are currently installed on your machine. This will help determine which product Service Packs you should install on your machine. The report also details which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.

ArcGIS Desktop (ArcView, ArcEditor, ArcInfo) Includes the ArcReader fixes for the ArcReader FEATURE.
ArcGIS Desktop Developer Kit
ArcGIS Engine Runtime
ArcGIS Engine Developer Kit
ArcGIS Server
ArcGIS Server .NET ADF
ArcGIS Server Java ADF
ArcGIS Tutorial Data
ArcReader standalone
ArcIMS
ArcSDE

NOTE (ArcIMS and ArcGIS Desktop users): If you use ArcIMS 9.1 or ArcGIS Desktop 9.1, you must also install ArcIMS 9.1 Service Pack 2 or ArcGIS 9.1 Service Pack 2 . For example, if you use ArcIMS 9.1 and ArcSDE 9.1, install both ArcIMS 9.1 Service Pack 2 and ArcSDE 9.1 Service Pack 2. Since ArcIMS 9.1, ArcSDE 9.1 and the ArcGIS 9.1 products share common DLLs, it is important to keep the software release versions in sync to avoid any software conflicts.

NOTE (ArcGIS Server users): If you have ArcGIS Server 9.1 and any other ArcGIS product installed on your machine, we recommend that you install the ArcGIS 9.1 Server Service Pack before installing the remaining Service Packs. Since ArcGIS Server and the ArcGIS 9.1 products share common DLLs, it is important to keep the software release versions in sync to avoid any software conflicts.

NOTE (ArcSDE for SQL Server users): If you plan to upgrade your database to SQL Server 2005, there are certain post installation steps that must be performed manually that are outlined in the following KB article: HowTo: Manual post-installation of ArcSDE 9.1 for SQL server 2005 - single database model.

Installation Steps

IMPORTANT NOTE: If you've previously installed ArcSDE 9.1 General Update Patch 2 you only need to run steps 1 through 4. This will ensure that the ESRI Patch reporting information is properly updated.

Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.

NOTE: If you do not to shut down the ArcSDE service before installing this Service Pack, you will be prompted and required to reboot your server machine in order to successfully complete the Service Pack installation.
Download the appropriate files to a location other than the ArcSDE installation folder:

DB2
ArcSDE-DB2-91sp2.msp	2 MB
Informix
ArcSDE-Informix-91sp2.msp	2 MB
Oracle 8i
ArcSDE-Oracle8i-91sp2.msp	2 MB
Oracle 9i
ArcSDE-Oracle9i-91sp2.msp	2 MB
Oracle 10gR2
The ArcSDE 9.1 for Oracle10gR2 release contains all the fixes from this Service Pack and can be applied to either a 10gR1 or 10gR2 installation.
SQL Server
ArcSDE-SQLServer-91sp2.msp	2 MB

Double-click the ArcSDE-<Database>-91sp2.msp to start the install process.

NOTE:

msiexec.exe /p [location of service pack]\ArcSDE-<Database>-91sp2.msp 
    REINSTALL=ALL REINSTALLMODE=omus

When Setup starts, follow the instructions on your screen.

(Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example (for details on using the sdesetup<dbms> command for your database, please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command):

% sdesetupora9i -o upgrade –u sde –p <SDE_Admin_password>

(Oracle only) After the upgrade completes, you may revoke the following permissions from the SDE user account:

ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY TRIGGER
CREATE ANY VIEW
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
As the SDE user, run the following command to restart the ArcSDE service:

sdemon -o start

ArcSDE SDK Install for UNIX

Installation Steps:

Download the appropriate tar file to a location other than ArcSDE SDK installation location:

All Databases (32 bit Operating System)
HP-UX sde91-sp2-sdk-hp.tar	15 MB
IBM sde91-sp2-sdk-ibm.tar	12 MB
Linux sde91-sp2-sdk-lx.tar	8 MB
Solaris sde91-sp2-sdk-slrs.tar	12 MB

All Databases (64 bit Operating System)
HP-UX 64 sde91-sp2-sdk-hp64.tar	11 MB
IBM64 sde91-sp2-sdk-ibm64.tar	11 MB
Solaris64 sde91-sp2-sdk-slrs64.tar	10 MB
Tru64 sde91-sp2-sdk-tru64.tar	17 MB

Extract the specified tar file by typing:

% tar -xvf sde91-sp2-sdk-<Platform>.tar

Start the installation by typing:

% ./applypatch

This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

ArcSDE SDK Install for Windows

Installation Steps:

Make sure you have write access to the ArcSDE SDK installation folder:.

Download the appropriate files to a location other than the ArcSDE SDK installation folder:

ArcSDE SDK ArcSDE-SDK-91sp2.msp	6 MB
ArcSDE Java SDK ArcSDE-JavaSDK-91sp2.msp	2 MB

Double-click the appropriate executable to start the install process.

When Setup starts, follow the instructions on your screen.

ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

The client updates contained in ArcSDE 9.1 Service Pack 2 are also included in ArcIMS 9.1 Service Pack 2 and ArcGIS 9.1 Desktop Service Pack 2. This is necessary to maintain version compatibility between the client and the server applications.

UNIX

If you connect to ArcSDE 9.1 SP2 using ArcGIS 9.1 Workstation on any supported Unix/Linux platform please follow the steps below to install this Service Pack to your ArcGIS 9.1 software installation directory. This also applies if connecting to ArcSDE 9.1 SP2 using ArcGIS Server, ArcGIS Engine, and ArcGIS Reader for Sun Solaris and Linux:

Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:

HP-UX sde91-sp2-esri-hp.tar.Z	15 MB
IBM sde91-sp2-esri-ibm.tar.Z	12 MB
Linux sde91-sp2-esri-lx.tar.Z	8 MB
Solaris sde91-sp2-esri-slrs.tar.Z	12 MB
Tru64 sde91-sp2-esri-tru64.tar.Z	17 MB

Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:

%cd <installation_directory> (i.e. cd $ARCHOME or $AGSHOME)
%uncompress sde91-sp2-esri-<Platform>.tar.Z %tar xvf sde91-sp2-esri-<Platform>.tar

Windows

If you connect to ArcSDE 9.1 using ArcGIS 9.1 Workstation or ArcView GIS 3.3 with DBA 2.1g, please follow the steps below to install this Service Pack to your ArcGIS 9.1 Workstation or ArcView GIS 3.3 with DBA 2.1g installation folder:
- Before you start, make sure you have write access to the installation folder, then download the zip file to that location:
  
  sde91-sp2-esri-win.zip 8 MB
- Use WinZip to extract the new files from sde91-sp2-esri-win.zip to the appropriate installation folder, see list below:
  - ArcGIS Workstation - <installation-folder>\arcexe9x\bin
  - ArcView GIS - <installation-folder>\av_gis30\arcview\(bin32 & DCONNECT\LIB)

How to identify which Service Pack is installed

UNIX

ArcGIS Engine Runtime
ArcGIS Reader
ArcGIS Server
ArcIMS
ArcInfo Workstation
ArcSDE

Extract the tar file by typing:

% tar xvf PatchFinder.tar

Run the utility by typing:

% ./PatchFinder

Windows

To find out what ArcGIS products are currently installed on your machine, download the ServicePackFinder91.exe utility and run it from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.

Service Pack Updates

Check the Online Support Center periodically for the availability of additional Service Packs. New information about this Service Pack will be posted here.

UPDATE 06/01/2007 - Text update:

Operating System for HP is now listed as HP-UX to alleviate any confusion between HP-UX and HP TRU64.

Getting Help

Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.

Publicado: 3/8/2021

Id. de descarga: 1163