Saltar al contenido principal

Patches and updates

PLTS for ArcGIS 9.2 Aeronautical Service Pack 3

Published: November 3, 2007

Resumen

This Service Pack contains performance improvements and maintenance fixes. Please download and install this required Service Pack at your earliest convenience.

Descripción

This service pack will upgrade PLTS for ArcGIS 9.2 Aeronautical Solution to version 9.2.0.3 (build 708). In addition to the issues addressed, the service pack introduces an updated Aeronautical Information System (AIS) data model and data dictionary as well as significant enhancement to the following tools: Line Bypass can now be used with the AIS model and Profile View now works with multiple transitions.

Note: You must install ArcGIS 9.2 Service Pack 3 or greater before installing this service pack.

Note: You must install PLTS for ArcGIS 9.2 Foundation Service Pack 3 or greater before installing this service pack.

Issues Addressed with this Service Pack


1191Chart Leads not calculated correctly
1194Update/Create chart leads should recognize an AACDTD chart and make chart leads blue
1198Cannot begin profile from multiple points/verticals
1201Update Anno removes most or all arrowheads
1208Add a Select All button to the Aero Commander dialog
1219PLTS Feature Builder Enhancement - Keyhole function needs a check for similar buffer parameters
1220PLTS Feature Builder Keyhole Functions do not populate Label or Description fields in table
1288Make line bypass work for AIS model
2503Load error for AirBoundaryAreas when name has apostrophe
2511Change Reporter-incorrect status reported for attribute modification on oracle SDE
2640Geometry change appears when there is only an Attribute change
2642All charts listed in Charts to Process
3179Notes feature class needs TerminalProcedure_ID field
3554Typo in Aero desktop help-Visually depicting cartographic exceptions topic
3573Procedure Leg PI: Some set of parameters produce incorrect results
3575Change Reporter GP tool - Not displaying Attributed classes
3632Error opening CSA L-1 MXD
3646Need field to store alternate minima data
3704CRC_Txt data type is an integer
3705Profile tool not setup to work with SP2 model.
3711Letter position not aligned for Aero scale bar for bottom orientation
3712Only point features need to be available in dropdown list of reporting point table
3718Feature count column does not appear on opening the Batch Masking tool
3734Unable to create Annotation if 9.1 was installed previously
3736Unable to Generate Waypoint Anno
3740Chart Leads Calculator Missing Status Bar
3757Aeronautical Load not working correctly
3871Error received when trying to copy scale bars from one MXD to another
3955Create Feature Linked Annotation not successfully running after a string of edits/other tools ran.
3956"Batch Masking tool results N/A after running string of previous tools, restart mxd and is ok. "
3960Exception raised when a non featured linked Anno is selected and click on Anno Abbreviate
3980Incorrect values in Code_Cat_Ldg_Aid Domain
3981Update AIS Data Dictionary for Code_Cat_Ldg_Aid
4960DBSynch is not working consistently
11781Multi-NAVAID Anno displaying with only three letter ident
11783AIS Data Model-Airspace Weather Domain
11785Create FLA is not populating Mapid_txt field on new annotation on FAA Oracle DB
11797AIS Data Model-ADHPThreshold to ILS/MLS Relationship
11799AIS Data Model-Holding Pattern domains incorrect
18014PLTS->Properties throws an exception
18895Create Feature-linked anno relies upon the AOI chosen in the PCat Viewer
18903Range Marker Documentation - Statement contradicts with the executable
18939Modify Margin Documentation- Statement needs to be changed
18940See Spot Color not mapping NRS waypoints correctly
19157Unable to create Batch Chart Leads because of error
19166Options on Update Anno window enabled and disabled at wrong times
19173"Make Chart Type utilities work with any setup for H, L, B"
19325Need rel class from Terminal Procedure to Surface Area for the TLOF subtype to IAP.
19334Error in aero load log file when wpt_mca table doesn't exist in the changefile
19339Profile view help should be updated saying profile view honors definition query on TerminalProcedure
19409CKB generated from PLTS properties not valid
19412Cannot generate anno for collocated waypoints
19415Line Bypass documentation needs to be updated
19607Profile View does not show DME arc when it changes its course with Arc Function
19609Multiple Transition doe not show text Elements and arrows
19611Profile View is not moving if the start profile view is edited by moving the transitions in it
19612Missed Approach point is getting created little far from runway.
19613Profile Selection box should be sorted based on Airport name not on Client Key ID
19630Update AIS Data dictionary
19646Airspace carto features are deleted during the load
19654Cut Line Tool cutting too far back on EEA 18
19718Create Feature linked annotation help needs to be updated
19728Documentation update for profile view schema change
20989Incorrect screen capture for extraction queries
21007Line Bypass needs to be added to the AIS Editing toolbar.
22014Documentation needs to be updated to reflect that the Line Bypass tool is now enabled for AIS.
22290Line Bypass documentation should mention using a projected coordinate system.
22434Exception thrown when exclude features and then run carto commander

Files Installed with this service pack


oNewAERONAUTICAL.9.2.3.xml
oNewCKB_Base_GX.xml
oNewDOD_Terminals.style
oNewResAnnoAbbrIt.dll
oReplace administering_the_product_catalog.chm
oReplace administering_the_product_catalog.lif
oReplace Aeronautical_Settings.xml
oReplace AIS_Charting_data_dictionary.lif
oReplace ais_data_dictionary.lif
oReplace foundationInterfaces.olb
oReplace ResAeroAnno.dll
oReplace ResPCatControlProj.dll
oReplace working_with_the_product_catalog.chm
oReplace working_with_the_product_catalog.lif
oReplaceAero_SplitCallout.dll
oReplaceAeroAirspaceTools.dll
oReplaceAeroAnchorPointMover.dll
oReplaceAeroAnno.dll
oReplaceAeroAnnoRotation.dll
oReplaceAeroATSAnnoHider.dll
oReplaceAeroATSRouteHider.dll
oReplaceAeroBoundaries.dll
oReplaceAeroCharting.dll
oReplaceAeroCommander.dll
oReplaceAeroDBSynch.exe
oReplaceAeroDebugEditExt.dll
oReplaceAeroEditEnv.dll
oReplaceAeroElements.dll
oReplaceaeroInterfaces.olb
oReplaceAeroLibrary.dll
oReplaceaeronautical_maintenance_production_procedures.chm
oReplaceaeronautical_maintenance_production_procedures.lif
oReplaceaeronautical_production_procedures.chm
oReplaceaeronautical_production_procedures.lif
oReplaceAeronautical_TransSpec.mdb
oReplaceAeroPostLoad.dll
oReplaceAeroRegister.exe
oReplaceAeroUpdate.dll
oReplaceAirBoundaryLines.dll
oReplaceAIS.xml
oReplaceais_data_dictionary.chm
oReplaceAIS_GX.xml
oReplaceAISCharting.xml
oReplaceAISCharting_GX.xml
oReplaceAIXMLoader.dll
oReplaceAIXMProvider.dll
oReplaceAnnoAbbrIt.dll
oReplaceBufferedPolygonRenderer.dll
oReplaceCartoFeatMigration.dll
oReplaceChangeReporter_aeronautical.xml
oReplaceCreateCartoFeatures.dll
oReplacecreating_features_with_feature_builder.chm
oReplacecreating_features_with_feature_builder.lif
oReplaceDoD.xml
oReplaceDoD_GX.xml
oReplaceDVOF.dll
oReplaceEnroute.style
oReplaceESRI.PLTS.Aero.Desktop.dll
oReplaceESRI.PLTS.Aero.Desktop.pdb
oReplaceESRI.PLTS.Aero.Engine.dll
oReplaceESRI.PLTS.Aero.Engine.Interfaces.dll
oReplaceESRI.PLTS.Aero.Engine.pdb
oReplaceESRI.PLTS.Foundation.Desktop.dll
oReplaceESRI.PLTS.Foundation.Desktop.pdb
oReplaceESRI.PLTS.Foundation.Engine.dll
oReplaceESRI.PLTS.Foundation.Engine.Interfaces.dll
oReplaceESRI.PLTS.Foundation.Engine.pdb
oReplaceExportLizard.dll
oReplaceExportMap.dll
oReplaceHideMidSegAnno.dll
oReplaceHideShowAnno.dll
oReplaceMabas.dll
oReplaceMaskingToggle.dll
oReplaceMetaGDBImporter.dll
oReplacempsAeroElements.dll
oReplaceMultiAirZones.dll
oReplaceMultiFeatures.dll
oReplaceMultiNavaids.dll
oReplaceNGAChangesReporter.exe
oReplaceOverflowBox.dll
oReplacePCatControl.ocx
oReplacePLTS_Aeronautical_AIS_05.ttf
oReplaceplts_aeronautical_solution.chm
oReplaceplts_aeronautical_solution.lif
oReplaceplts_aeronautical_tools.chm
oReplacePLTS_Aeronautical_Tools.tbx
oReplacePointOffsetRenderer.dll
oReplacePointOnOffRoute.dll
oReplaceRangeMarkers.dll
oReplaceRASOverflowBox.dll
oReplaceReportPointIndex.dll
oReplaceResAeroAirspaceTools.dll
oReplaceResAeroAnchorPointMover.dll
oReplaceResAeroAnnoRotation.dll
oReplaceResAeroATSAnnoHider.dll
oReplaceResAeroATSRouteHider.dll
oReplaceResAeroBoundaries.dll
oReplaceResAeroCommander.dll
oReplaceResAeroDBSynch.dll
oReplaceResAeroDebugEditExt.dll
oReplaceResAeroEditEnv.dll
oReplaceResAeroLibrary.dll
oReplaceResAeroPostLoad.dll
oReplaceResAirBoundaryLines.dll
oReplaceResAIXMLoader.dll
oReplaceResAIXMProvider.dll
oReplaceResBufferPolyRenderer.dll
oReplaceResCartoFeatMigration.dll
oReplaceResCreateCartoFeatures.dll
oReplaceResDVOF.dll
oReplaceResExportLizard.dll
oReplaceResExportMap.dll
oReplaceResHideMidSegAnno.dll
oReplaceResHideShowAnno.dll
oReplaceResizeAnnotation.dll
oReplaceResMabas.dll
oReplaceResMaskingToggle.dll
oReplaceResMetaGDBImporter.dll
oReplaceResmpsAeroElements.dll
oReplaceResMultiAirZones.dll
oReplaceResMultiFeatures.dll
oReplaceResMultiNavaids.dll
oReplaceResNGAChangesReporter.dll
oReplaceResOverflowBox.dll
oReplaceResPointOffsetRenderer.dll
oReplaceResPointOnOffRoute.dll
oReplaceResRangeMarkers.dll
oReplaceResRASOverflowBox.dll
oReplaceResReportPointIndex.dll
oReplaceResResizeAnnotation.dll
oReplaceResRotateToGrid.dll
oReplaceResRouteProcessingTool.dll
oReplaceResRouteRenderer.dll
oReplaceResSUARenderer.dll
oReplaceResTestAnnoGeometry.dll
oReplaceResUCOverAndUp.dll
oReplaceRotateToGrid.dll
oReplaceRouteProcessingTool.dll
oReplaceRouteRenderer.dll
oReplaceSUARenderer.dll
oReplaceTestAnnoGeometry.dll
oReplaceTestAnnoGeometry.dll
oReplaceUCOverAndUp.ocx

Installing the Service Pack



1.You must have administrator privileges and ensure that ArcMap is not currently open.

2.The CD or network location PLTS was originally installed from must be available. For instance, if PLTS was installed from a CD, the CD must be available during the service pack install. Copy the service pack to a local folder and have the PLTS software CD in the CD drive while installing the service pack. If PLTS was installed from a network location the location must be available during the service pack install.

3.Double-click the PLTSAeronautical92_SP3.msp and follow the installation instructions.

Note: If the .msp extension is currently being used by another program and double clicking the .msp does not start the install process the service pack can be run from the command line.


Launching the service pack from command line:

1.At a DOS command prompt, type 'msiexec.exe' to see if msiexec.exe can be found without specifying its full path.

2.If Step 1 returns a message box from the Windows Install, proceed to Step 3. If it is not found, search your computer for 'msiexec.exe', usually found in the system32 folder, and note the full path when found.

3.At a DOS command prompt use the following syntax to run the .msp file directly:

C:>\path\msiexec.exe /p path\.msp

Example:
C:>\msiexec.exe /p C:\temp\PLTSFoundation92_SP3.msp

An article on command line installations can be found on the ESRI support site at:
HowTo: Install a .msp file that is not recognized as a patch file

Service Pack and Patch Updates


Check Online Support Center periodically for the availability of additional service packs and patches.

Getting Help


Domestic sites, please contact ESRI Technical Support at 909.793.3774, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.

Download



Supporting Files



Download ID:1349

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options