Patches and updates

ArcSDE 9.3 Service Pack 1 Compress with Concurrent Editors Patch

Published: May 11, 2009

Resumen

This patch fixes two issues associated with compressing a geodatabase while users are in the process of making versioned edits to data in the geodatabase. ESRI recommends you apply this patch if you compress your geodatabase while any users are concurrently performing edits.

Descripción

ESRI ® announces the ArcGIS Compress with Concurrent Editors patch. This patch fixes two issues associated with compressing a geodatabase while users are in the process of making versioned edits to data in the geodatabase. The specific issues addressed in this patch are listed in the next section. ESRI recommends you apply this patch if you compress your geodatabase while any users are concurrently performing edits.

Please see technical articles 36194 and 35287 for more detailed information.

Issues Fixed with this Patch

  • NIM007009 - Identify tool returns nothing against route events in SDO_GEOMETRY that are registered as versioned
  • NIM012273 - ST_Geometry: Query misses features with NULL geometries and returns wrong result set or fails with SE_ROW_NOEXIST (-22) if the first feature in result set contains a NULL geometry.
  • NIM041843 - Compressing a geodatabase while users are connected and editing can encounter the error "Target state not found in the STATES table (-172)". (Please see technical article 35287 for more details.)
  • NIM042238 - Executing a compress operation while sessions are connected and editing can result in data inconsistencies if the compress operation attempts to delete a state of the database with descendant states. (Please see technical article 36194 for more details.)
  • NIM042827 - ArcSDE for Oracle: Optimize delete statements used by trim and deleting states when removing rows from a versioned table's deletes table.
  • NIM043097 - Compressing a geodatabase can lead to blocking conditions in ArcGIS which impact editor user response time. Please see technical article 36371 for more details.)
  • NIM010273 - Spatial Type for Oracle: Unable to create spatial index on feature class in ST_GEOMETRY when using European locale that uses a comma as a decimal symbol and Oracle

Installing the Patch

It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using an administrator account.

REQUIRED INSTALLATION STEP: If you connect to ArcSDE 9.3 via an Application Server and Direct Connect connections using ArcGIS 9.3, ArcIMS 9.3, or 9.3 ArcInfo Workstation make sure you also see ESRI products connecting to ArcSDE (application server and direct connections).

Server installation for UNIX

  • UNIX/Linux Installation Notes:

    During installation, you can either save the original 9.3 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

    At a minimum, you must install ArcSDE 9.3 Service Pack 1 before installing this patch. If you have already installed the ArcSDE 9.3 Service Pack 1 Memory Allocation Patch, you can install the ArcSDE 9.3 Compress with Concurrent Editors patch on top of that. However, it is not required to install the Memory Allocation Patch because the ArcSDE 9.3 Compress with Concurrent Editors patch includes those fixes as well.

  1. Download the appropriate tar file to a location other than $SDEHOME:

  2. Stop your current ArcSDE service if one is running.
  3. % sdemon -o shutdown

    NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

    # /usr/sbin/slibclean

    (Optional) To list the libraries loaded into memory, as ROOT user, type:

    # /usr/sbin/genkld

    For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

  4. Extract the specified tar file by typing:
  5. % tar -xvf sde93sp1-compresspatch-<Database>-<Platform>.tar
  6. Start the installation by typing:
  7. % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  8. (This step is for Oracle only, all other DBMS skip to the next step)
    Before running "sdesetup -o upgrade", you must grant the following additional permissions to the SDE user in Oracle:
    • ADMINISTER DATABASE TRIGGER
      ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY PROCEDURE
      CREATE ANY SEQUENCE
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE PROCEDURE
      CREATE PUBLIC SYNONYM
      CREATE SESSION
      CREATE SEQUENCE
      CREATE TABLE
      CREATE TRIGGER
      CREATE TYPE
      DROP ANY INDEX
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      DROP ANY TABLE
      DROP ANY VIEW
      DROP PUBLIC SYNONYM
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      SELECT ANY TABLE
  9. To upgrade, run sdesetup. Failure to do so may cause problems in starting the service or with connecting to the geodatabase. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:
  10. %sdesetup -o upgrade -d <ORACLE9I|ORACLE10G|ORACLE11G|SQLSERVER|DB2|INFORMIX|POSTGRESQL> –u <DB_Admin_User> –p <DB_Admin_password>

  11. (This step is for Oracle only, all other DBMS skip to the next step)
    After the upgrade completes, you may revoke the following permissions from the SDE user account:

    • ADMINISTER DATABASE TRIGGER
      ANALYZE ANY
      ALTER ANY INDEX
      ALTER ANY TABLE
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE TYPE
  12. Restart your service.
  13. % sdemon -o start

  14. (This step only applies to Oracle or PostgreSQL users who have the ArcSDE component and the DBMS installed on separate servers. All other users proceed to the next step.)


  15. For Oracle:

    If you have the ArcSDE component and Oracle installed on separate servers, there are three shared libraries used by EXTPROC that must be copied to the Oracle server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the Oracle server. Be sure the files copied to the Oracle server are designed to run on the operating system of the Oracle server. See the ArcSDE for Oracle installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the Oracle server.

    Library Name OS-dependent file names
    st_shapelib st_shapelib.dll (Windows), libst_shapelib.so (Solaris, Linux, and HP-UX Itanium), libst_shapelib.sl (HP-UX PA-RISC), libst_shapelib_64.so (IBM)
    Projection Engine pe.dll (Windows), libpe.so (Solaris, Linux, and HP-UX Itanium), libpe.sl (HP-UX PA-RISC), libpe_64.so (IBM)
    Geometry sg.dll (Windows), libsg.so (Solaris, Linux, and HP-UX Itanium), libsg.sl (HP-UX PA-RISC), libsg_64.so (IBM)

    For PostreSQL:

    If you have the ArcSDE component and PostgreSQL installed on separate servers, there are three libraries that must be copied to the PostgreSQL server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the PostgreSQL server. Be sure the files copied to the PostgreSQL server are designed to run on the operating system of the PostgreSQL server. See the ArcSDE for PostgreSQL installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the PostgreSQL server.

    Library Name OS-dependent file names
    st_geometry st_shapelib.dl (Windows), st_geometry.so (Linux)
    Projection Engine pe.dll (Windows), libpe.so (Linux)
    Geometry sg.dll (Windows), libsg.so (Linux)
  16. If you have ArcSDE installed on more than one server, perform steps 1 through 8 for each one.
    Note:If you have multiple geodatabases on the same server, you only have to install the patch once on the server, but you must perform steps 5 through 8 to upgrade each of the geodatabases and restart their corresponding services if services exist.

Server installation for Windows

  • Windows Installation Notes:

    At a minimum, you must install ArcSDE 9.3 Service Pack 1 before installing this patch. If you have already installed the ArcSDE 9.3 Service Pack 1 Memory Allocation Patch, you can install the ArcSDE 9.3 Compress with Concurrent Editors patch on top of that. However, it is not required to install the Memory Allocation Patch because the ArcSDE 9.3 Compress with Concurrent Editors patch includes those fixes as well.

Installation Steps

  1. Install this Patch using an administrator account. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.

  2. Download the appropriate files to a location other than the ArcSDE installation folder:

  3. Double-click the appropriate executable to start the installation process.

  4. When Setup starts, follow the instructions on your screen.

  5. (This step is for Oracle only, all other DBMS skip to the next step)
    Before running "sdesetup -o upgrade", you must grant the following additional permissions to the SDE user in Oracle:

    • ADMINISTER DATABASE TRIGGER
      ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY PROCEDURE
      CREATE ANY SEQUENCE
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE PROCEDURE
      CREATE PUBLIC SYNONYM
      CREATE SESSION
      CREATE SEQUENCE
      CREATE TABLE
      CREATE TRIGGER
      CREATE TYPE
      DROP ANY INDEX
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      DROP ANY TABLE
      DROP ANY VIEW
      DROP PUBLIC SYNONYM
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      SELECT ANY TABLE
  6. As the ArcSDE Administrative user run the sdesetup command. Failure to do so may cause problems in starting the service or with connecting to the geodatabase. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:
  7. c:\ sdesetup -o upgrade -d <ORACLE9I|ORACLE10G|ORACLE11G|SQLSERVER|DB2|INFORMIX|POSTGRESQL> –u <DB_Admin_User> –p <DB_Admin_password>

  8. (This step is for Oracle only, all other DBMS skip to the next step)
    After the upgrade completes, you may revoke the following permissions from the SDE user account:

    • ANALYZE ANY
      ALTER ANY INDEX
      ALTER ANY TABLE
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE TYPE
  9. As the ArcSDE administrative user, run the following command to restart the ArcSDE service:

    c:\sdemon -o start

  10. (This step only applies to Oracle or PostgreSQL users who have the ArcSDE component and the DBMS installed on separate servers. All other users proceed to the next step.)


  11. For Oracle:


    If you have the ArcSDE component and Oracle installed on separate servers, there are three shared libraries used by EXTPROC that must be copied to the Oracle server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the Oracle server. Be sure the files copied to the Oracle server are designed to run on the operating system of the Oracle server. See the ArcSDE for Oracle installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the Oracle server.


    Library Name OS-dependent file names
    st_shapelib st_shapelib.dll (Windows), libst_shapelib.so (Solaris, Linux, and HP-UX Itanium), libst_shapelib.sl (HP-UX PA-RISC), libst_shapelib_64.so (IBM)
    Projection Engine pe.dll (Windows), libpe.so (Solaris, Linux, and HP-UX Itanium), libpe.sl (HP-UX PA-RISC), libpe_64.so (IBM)
    Geometry sg.dll (Windows), libsg.so (Solaris, Linux, and HP-UX Itanium), libsg.sl (HP-UX PA-RISC), libsg_64.so (IBM)

    For PostgreSQL:


    If you have the ArcSDE component and PostgreSQL installed on separate servers, there are three libraries that must be copied to the PostgreSQL server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the PostgreSQL server. Be sure the files copied to the PostgreSQL server are designed to run on the operating system of the PostgreSQL server. See the ArcSDE for PostgreSQL installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the PostgreSQL server.

    Library Name OS-dependent file names
    st_geometry st_shapelib.dl (Windows), st_geometry.so (Linux)
    Projection Engine pe.dll (Windows), libpe.so (Linux)
    Geometry sg.dll (Windows), libsg.so (Linux)
  12. If you have ArcSDE installed on more than one server, perform steps 1 through 8 for each one.
    Note:If you have multiple geodatabases on the same server, you only have to install the patch once on the server, but you must perform steps 5 through 8 to upgrade each of the geodatabases and restart their corresponding services if services exist.

ArcSDE SDK installation for UNIX

  1. Download the appropriate tar file to a location other than ArcSDE SDK installation location:
    All Databases (32 bit Operating System)
    All Databases (64 bit Operating System)

  2. Extract the specified tar file by typing:
    % tar -xvf sde93sp1-compresspatch-sdk-<Platform>.tar
  3. Start the installation by typing:
    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

ArcSDE SDK installation for Windows

  1. Make sure you have write access to the ArcSDE SDK installation folder.

  2. Download the appropriate files to a location other than the ArcSDE SDK installation folder:


  3. Double-click the appropriate executable to start the installation process.

  4. When Setup starts, follow the instructions on your screen.

ESRI products connecting to ArcSDE (application server and direct connections)

  • UNIX

    • If you connect to ArcSDE 9.3 Service Pack 1 using ArcGIS 9.3 ArcInfo Workstation or ArcIMS 9.3 SP1 on any supported Unix/Linux platform please follow the steps below to install this Patch to your ArcGIS 9.3 SP1 or ArcIMS 9.3 SP1 software installation directory. This also applies if connecting to ArcSDE 9.3 SP1 using ArcGIS Server 9.3 SP1, ArcGIS Engine 9.3 SP1 , and ArcGIS Reader 9.3 SP1 for Sun Solaris and Linux:

      • Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:


      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

      • Uncompress and extract the specified tar file for your platform. At the UNIX prompt type:

        %cd <installation_directory> (i.e. cd $ARCHOME)
        %gunzip sde93sp1-compresspatch-esri-<Platform>.tar.gz
        %tar xvf sde93sp1-compresspatch-esri-<Platform>.tar
      • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

    Windows

    • If you connect to ArcSDE 9.3 Service Pack 1 using ArcGIS 9.3 SP1, ArcIMS 9.3 SP1, or ArcInfo Workstation 9.3, please follow the steps below to install this Patch to your ArcGIS 9.3 SP1, ArcIMS 9.3 SP1, or ArcInfo Workstation 9.3 installation folder:

    • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:


    • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
    • Use WinZip to extract the new file from sde93sp1-compresspatch-esri-win.zip to the appropriate installation folder, see list below:

      • ArcGIS Desktop, ArcInfo Workstation, or ArcView 9 - <installation-folder>\bin
      • ArcView GIS - <installation-folder>\arcview3\bin
      • ArcIMS – <installation-folder>\server\bin:
        If it is listed in the files included section, extract sde.dll to <installation-folder>\Metadata\Commands
        If it is listed in the files included section, extract sde.dll to <installation-folder>\IndexBuilder
    • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

How to identify which Patch is installed


  1. UNIX
    • To find out what ArcGIS products are currently installed on your machine, copy the PatchFinder.tar utility to your machine and run it from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.

      • ArcGIS Engine Developer Kit for C++
        ArcGIS Engine Developer Kit for the Java Platform
        ArcGIS Engine Runtime
        ArcGIS Server for the Java Platform
        ArcIMS
        ArcIMS Web ADF for the Java Platform
        ArcInfo Workstation
        ArcReader
        ArcSDE

      Extract the tar file by typing:

      % tar xvf PatchFinder.tar

      Run the utility by typing:

      % ./PatchFinder

    Windows
    • To find out what products are currently installed on your machine, run the PatchFinder93.exe utility. This utility provides a report detailing which ArcGIS products are currently installed on your machine. This will help determine which product Service Packs you should install on your machine. The report also details which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.

      • ArcGIS ArcReader
        ArcGIS Desktop (ArcView, ArcEditor, ArcInfo) Includes the ArcReader fixes for the ArcReader FEATURE.
        ArcGIS Desktop Developer Kit for the Microsoft .NET Framework, VB6, VBA and Visual C++
        ArcGIS Engine Developer Kit for C++, the Java Platform, the Microsoft .NET Framework, VB6 and Visual C++
        ArcGIS Engine Runtime
        ArcGIS Image Server
        ArcGIS Server for the Microsoft .NET Framework
        ArcGIS Server for the Java Platform
        ArcGIS Server Web ADF Runtime for the Microsoft .NET Framework
        ArcIMS
        ArcIMS Web ADF for the Microsoft .NET Framework
        ArcIMS Web ADF for the Java Platform
        ArcSDE

    Service Pack and Patch Updates

    Check Online Support Center periodically for the availability of additional Service Packs and Patches. New information about this Patch will be posted here.

    June 5, 2009: Added additional platforms for download.

    Getting Help

    Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.



Download ID:1509

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options