Patches and updates

ArcSDE 9.1 Service Pack 2

Published: July 10, 2006

Resumen

ESRI announces ArcSDE 9.1 Service Pack 2. Please download and install this required Service Pack at your earliest convenience. This Service Pack contains all the fixes from ArcSDE 9.1 Service Pack 1 and some additional performance improvements and maintenance fixes.

Descripción

A CD of this Service Pack will be made available for users who experience difficulties downloading the Service Pack from the web site. We will post the ordering instructions once the CDs are ready to ship.--->

A CD of this Service Pack is available for users who experience difficulties downloading the Service Pack from the web site. Simply fill out the Request a Service Pack CD order form.





Installing the Service Pack

ArcSDE 9.1 must be installed before you can install this Service Pack. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. If you have not yet applied the previous service pack, you do not have to do so before installing Service Pack 2 as it is cumulative and contains all fixes from the pervious service pack. If you already have a previous service pack installed, you may apply Service Pack 2 over it to update the required files. Install this Service Pack using your SDE user account.

REQUIRED INSTALL STEP: If you connect to ArcSDE 9.1 via an Application Server and Direct Connect connections using ArcGIS 9.1, ArcIMS 9.1, or ArcView GIS 3.3 with DBA 2.1g make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

Server Install for UNIX


UNIX Installation Notes:

  • To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.


    • ArcGIS Engine Runtime
      ArcGIS Reader
      ArcGIS Server
      ArcIMS
      ArcInfo Workstation
      ArcSDE

    Extract the tar file by typing:


    % tar xvf PatchFinder.tar

    Run the utility by typing:


    % ./PatchFinder


Installation Steps:


IMPORTANT NOTE: If you've previously installed ArcSDE 9.1 General Update Patch 2 you only need to run steps 1, 3 and 4. This will ensure that the ESRI Patch reporting information is properly updated.

During installation, you can either save the original 9.1 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

  1. Download the appropriate tar file to a location other than $SDEHOME:
  2. DB2  
    HP-UX 64 sde91-sp2-db2-hp64.tar
    33 MB
    IBM sde91-sp2-db2-ibm.tar
    40 MB
    IBM64 sde91-sp2-db2-ibm64.tar
    39 MB
    Linux sde91-sp2-db2-lx.tar
    32 MB
    Solaris64 sde91-sp2-db2-slrs64.tar
    47 MB
       
    Informix  
    HP-UX sde91-sp2-inf-hp.tar
    31 MB
    IBM sde91-sp2-inf-ibm.tar
    40 MB
    Solaris sde91-sp2-inf-slrs.tar
    45 MB
       
    Oracle 8i  
    HP-UX sde91-sp2-ora8i-hp.tar
    58 MB
    IBM sde91-sp2-ora8i-ibm.tar
    42 MB
    Solaris sde91-sp2-ora8i-slrs.tar
    47 MB
    Tru64 sde91-sp2-ora8i-tru64.tar
    43 MB
       
    Oracle 9i  
    HP-UX 64 sde91-sp2-ora9i-hp64.tar
    36 MB
    IBM64 sde91-sp2-ora9i-ibm64.tar
    41 MB
    Linux sde91-sp2-ora9i-lx.tar
    33 MB
    Solaris sde91-sp2-ora9i-slrs.tar
    47 MB
    Solaris64 sde91-sp2-ora9i-slrs64.tar
    49 MB
    Tru64 sde91-sp2-ora9i-tru64.tar
    43 MB
       
    Oracle 10gR2  
    The ArcSDE 9.1 for Oracle10gR2 release
    contains all the fixes from this Service Pack and can
    be applied to either a 10gR1 or 10gR2 installation.

  3. Stop your current ArcSDE service.


  4. % sdemon -o shutdown

    NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

    # /usr/sbin/slibclean

    (Optional) To list the libraries loaded into memory, as ROOT user, type:

    # /usr/sbin/genkld

    For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

  5. Extract the specified tar file by typing:


  6. % tar -xvf sde91-sp2-<Database>-<Platform>.tar

  7. Start the installation by typing:


  8. % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  9. (Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:


  10. ALTER ANY INDEX
    ALTER ANY TABLE
    ANALYZE ANY
    CREATE ANY INDEX
    CREATE ANY PROCEDURE
    CREATE ANY SEQUENCE
    CREATE ANY TRIGGER
    CREATE ANY VIEW
    CREATE SESSION
    DROP ANY INDEX
    DROP ANY TABLE
    DROP ANY VIEW
    DROP ANY PROCEDURE
    DROP ANY SEQUENCE
    EXECUTE ANY PROCEDURE
    SELECT ANY SEQUENCE
    SELECT ANY TABLE
    UNLIMITED TABLESPACE

    • To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example (for details on using the sdesetup<dbms> command for your database, please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command):


    • % sdesetupora9i -o upgrade –u sde –p <SDE_Admin_password>

    • (Oracle only) After the upgrade completes, you may revoke the following permissions from the SDE user account:

      ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE

    • Start your service again.


    • % sdemon -o start

Server Install for Windows


  • Windows Installation Notes:

    • It is important to keep the all versions of ArcGIS products installed on a machine in sync to avoid any software conflicts.

      To find out what products are currently installed on your machine, download the ServicePackFinder91.exe utility and run it from your local machine. This utility provides a report detailing which ArcGIS products are currently installed on your machine. This will help determine which product Service Packs you should install on your machine. The report also details which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.


      • ArcGIS Desktop (ArcView, ArcEditor, ArcInfo) Includes the ArcReader fixes for the ArcReader FEATURE.
        ArcGIS Desktop Developer Kit
        ArcGIS Engine Runtime
        ArcGIS Engine Developer Kit
        ArcGIS Server
        ArcGIS Server .NET ADF
        ArcGIS Server Java ADF
        ArcGIS Tutorial Data
        ArcReader standalone
        ArcIMS
        ArcSDE


      NOTE (ArcIMS and ArcGIS Desktop users): If you use ArcIMS 9.1 or ArcGIS Desktop 9.1, you must also install ArcIMS 9.1 Service Pack 2 or ArcGIS 9.1 Service Pack 2 . For example, if you use ArcIMS 9.1 and ArcSDE 9.1, install both ArcIMS 9.1 Service Pack 2 and ArcSDE 9.1 Service Pack 2. Since ArcIMS 9.1, ArcSDE 9.1 and the ArcGIS 9.1 products share common DLLs, it is important to keep the software release versions in sync to avoid any software conflicts.

      NOTE (ArcGIS Server users): If you have ArcGIS Server 9.1 and any other ArcGIS product installed on your machine, we recommend that you install the ArcGIS 9.1 Server Service Pack before installing the remaining Service Packs. Since ArcGIS Server and the ArcGIS 9.1 products share common DLLs, it is important to keep the software release versions in sync to avoid any software conflicts.

      NOTE (ArcSDE for SQL Server users): If you plan to upgrade your database to SQL Server 2005, there are certain post installation steps that must be performed manually that are outlined in the following KB article: HowTo:  Manual post-installation of ArcSDE 9.1 for SQL server 2005 - single database model.

Installation Steps


IMPORTANT NOTE: If you've previously installed ArcSDE 9.1 General Update Patch 2 you only need to run steps 1 through 4. This will ensure that the ESRI Patch reporting information is properly updated.

  1. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.

    NOTE: If you do not to shut down the ArcSDE service before installing this Service Pack, you will be prompted and required to reboot your server machine in order to successfully complete the Service Pack installation.

  2. Download the appropriate files to a location other than the ArcSDE installation folder:
  3. DB2  
    ArcSDE-DB2-91sp2.msp 2 MB
    Informix  
    ArcSDE-Informix-91sp2.msp 2 MB
    Oracle 8i  
    ArcSDE-Oracle8i-91sp2.msp 2 MB
    Oracle 9i  
    ArcSDE-Oracle9i-91sp2.msp 2 MB
    Oracle 10gR2  
    The ArcSDE 9.1 for Oracle10gR2 release
    contains all the fixes from this Service Pack and can
    be applied to either a 10gR1 or 10gR2 installation.
    SQL Server  
    ArcSDE-SQLServer-91sp2.msp 2 MB

  4. Double-click the ArcSDE-<Database>-91sp2.msp to start the install process.


  5. NOTE: If double clicking on the MSP file does not start the Service Pack installation, you can run the Service Pack manually by using the following commands.

    • msiexec.exe /p [location of service pack]\ArcSDE-<Database>-91sp2.msp REINSTALL=ALL REINSTALLMODE=omus

  6. When Setup starts, follow the instructions on your screen.


  8. (Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

  9. ALTER ANY INDEX
    ALTER ANY TABLE
    ANALYZE ANY
    CREATE ANY INDEX
    CREATE ANY PROCEDURE
    CREATE ANY SEQUENCE
    CREATE ANY TRIGGER
    CREATE ANY VIEW
    CREATE SESSION
    DROP ANY INDEX
    DROP ANY TABLE
    DROP ANY VIEW
    DROP ANY PROCEDURE
    DROP ANY SEQUENCE
    EXECUTE ANY PROCEDURE
    SELECT ANY SEQUENCE
    SELECT ANY TABLE
    UNLIMITED TABLESPACE

    • To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example (for details on using the sdesetup<dbms> command for your database, please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command):


    • % sdesetupora9i -o upgrade –u sde –p <SDE_Admin_password>

    • (Oracle only) After the upgrade completes, you may revoke the following permissions from the SDE user account:

      ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE

    • As the SDE user, run the following command to restart the ArcSDE service:

      sdemon -o start

ArcSDE SDK Install for UNIX


Installation Steps:


  1. Download the appropriate tar file to a location other than ArcSDE SDK installation location:
  2. All Databases (32 bit Operating System)  
    HP-UX sde91-sp2-sdk-hp.tar
    15 MB
    IBM sde91-sp2-sdk-ibm.tar
    12 MB
    Linux sde91-sp2-sdk-lx.tar
    8 MB
    Solaris sde91-sp2-sdk-slrs.tar
    12 MB
       
    All Databases (64 bit Operating System)  
    HP-UX 64 sde91-sp2-sdk-hp64.tar
    11 MB
    IBM64 sde91-sp2-sdk-ibm64.tar
    11 MB
    Solaris64 sde91-sp2-sdk-slrs64.tar
    10 MB
    Tru64 sde91-sp2-sdk-tru64.tar
    17 MB

  3. Extract the specified tar file by typing:


  4. % tar -xvf sde91-sp2-sdk-<Platform>.tar

  5. Start the installation by typing:


  6. % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

ArcSDE SDK Install for Windows


Installation Steps:


  1. Make sure you have write access to the ArcSDE SDK installation folder:.


  3. Download the appropriate files to a location other than the ArcSDE SDK installation folder:
  4. ArcSDE SDK ArcSDE-SDK-91sp2.msp 6 MB
    ArcSDE Java SDK ArcSDE-JavaSDK-91sp2.msp 2 MB

  5. Double-click the appropriate executable to start the install process.


  7. When Setup starts, follow the instructions on your screen.

ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

The client updates contained in ArcSDE 9.1 Service Pack 2 are also included in ArcIMS 9.1 Service Pack 2 and ArcGIS 9.1 Desktop Service Pack 2. This is necessary to maintain version compatibility between the client and the server applications.

  • UNIX

    1. If you connect to ArcSDE 9.1 SP2 using ArcGIS 9.1 Workstation on any supported Unix/Linux platform please follow the steps below to install this Service Pack to your ArcGIS 9.1 software installation directory. This also applies if connecting to ArcSDE 9.1 SP2 using ArcGIS Server, ArcGIS Engine, and ArcGIS Reader for Sun Solaris and Linux:

      • Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:

        HP-UX sde91-sp2-esri-hp.tar.Z
        15 MB
        IBM sde91-sp2-esri-ibm.tar.Z
        12 MB
        Linux sde91-sp2-esri-lx.tar.Z
        8 MB
        Solaris sde91-sp2-esri-slrs.tar.Z
        12 MB
        Tru64 sde91-sp2-esri-tru64.tar.Z
        17 MB

      • Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:

        %cd <installation_directory> (i.e. cd $ARCHOME or $AGSHOME)

        • <Workstation Installation Directory>/lib
        • <ArcGIS Server Installation Directory>/bin
        • <ArcGIS Engine Installation Directory>/bin
        • <ArcGIS Reader Installation Directory>/bin
        %uncompress sde91-sp2-esri-<Platform>.tar.Z
        %tar xvf sde91-sp2-esri-<Platform>.tar


    Windows

    1. If you connect to ArcSDE 9.1 using ArcGIS 9.1 Workstation or ArcView GIS 3.3 with DBA 2.1g, please follow the steps below to install this Service Pack to your ArcGIS 9.1 Workstation or ArcView GIS 3.3 with DBA 2.1g installation folder:

      • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:

        sde91-sp2-esri-win.zip 8 MB

      • Use WinZip to extract the new files from sde91-sp2-esri-win.zip to the appropriate installation folder, see list below:

        • ArcGIS Workstation - <installation-folder>\arcexe9x\bin
        • ArcView GIS - <installation-folder>\av_gis30\arcview\(bin32 & DCONNECT\LIB)

How to identify which Service Pack is installed


  1. UNIX

    To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which servicepacks have been installed. The PatchFinder utility searches for thefollowing ArcGIS products.


    • ArcGIS Engine Runtime
      ArcGIS Reader
      ArcGIS Server
      ArcIMS
      ArcInfo Workstation
      ArcSDE

    Extract the tar file by typing:


    % tar xvf PatchFinder.tar

    Run the utility by typing:


    % ./PatchFinder

    Windows

    To find out what ArcGIS products are currently installed on your machine, download the ServicePackFinder91.exe utility and run it from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.


    • ArcGIS Desktop (ArcView, ArcEditor, ArcInfo) Includes the ArcReader fixes for the ArcReader FEATURE.
      ArcGIS Desktop Developer Kit
      ArcGIS Engine Runtime
      ArcGIS Engine Developer Kit
      ArcGIS Server
      ArcGIS Server .NET ADF
      ArcGIS Server Java ADF
      ArcGIS Tutorial Data
      ArcReader standalone
      ArcIMS
      ArcSDE

Service Pack Updates

Check the Online Support Center periodically for the availability of additional Service Packs. New information about this Service Pack will be posted here.

  • UPDATE 06/01/2007 - Text update:

    • Operating System for HP is now listed as HP-UX to alleviate any confusion between HP-UX and HP TRU64.

Getting Help

Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.


Download ID:1163

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options