Error
The Site Scan Flight for ArcGIS app using an M300 drone shows zero images captured throughout the whole flight, but the progress bar works correctly and images are captured as expected.
| Número de ID del error | BUG-000157835 |
|---|---|
| Enviado | April 26, 2023 |
| Última modificación | July 31, 2024 |
| Relacionado con | Site Scan for ArcGIS |
| Versión encontrada | 4.5 |
| Sistema operativo | Apple iPadOS |
| Versión de sistema operativo | 15.x |
| Estado | Non-Reproducible |
Información adicional
The relevant team has reviewed the flight logs and found no image callback during the flight. This means the Site Scan flight app is sending commands to take photos, but the camera is not sending feedback once a photo is taken. When the app does not receive feedback from the camera, this is usually an indication of a hardware issue, either with the camera or the gimbal connector. Please try the following troubleshooting steps: Use another drone and/or camera that is available. - Switch the P1 camera (Camera A), from which the issue happens, to another M300 (Drone B). - Fly a basic survey mission (no longer than 5 minutes) and confirm if this issue continues. If this issue occurs on the other drone, it is likely an issue with the gimbal connector. If there is no issue when swapping cameras, then do the following. - On the M300 (Drone A), use the other P1 camera (Camera B). - If the issue occurs on Drone A, then it is likely an issue with the gimbal connector on the drone's end.Pasos para reproducir
ID del error: BUG-000157835
Software:
- Site Scan for ArcGIS
Recibir notificaciones cuando cambie el estado de un error
Descubrir más sobre este tema
Buscar información relacionada
Encontrar formación relacionada con este tema
Explorar ideas y aportar opiniones
Obtener ayuda de expertos en ArcGIS
Descargar la aplicación de soporte de Esri