English
Continue in the app

ArcGIS Server 10.9.1 Machine Rename Patch

Summary

This patch resolves a failure in ArcGIS Server when attempting to rename a machine.

Description

Esri® announces the ArcGIS Server 10.9.1 Machine Rename Patch. When a machine is renamed after the Create Site operation has been run, a failure prevents the rename from being successfully recognized by the software. A workflow such as renaming a Windows or Linux machine and then restarting the machine would expose this bug and result in an error from ArcGIS Server. This patch resolves the issue so that the machine can be successfully renamed even after the Create Site operation is complete. Esri recommends that any user utilizing a manual or automated workflow to rename the ArcGIS Server machine should install this patch. It deals specifically with the issues listed below under Issues Addressed with this patch.

December 8, 2021: New setups have been released for this patch. The new setups will install and replace the previously released version, an uninstall of the previously released patch is not necessary.

The ArcGIS Server 10.9.1 Setup Program Patch is a mandatory prerequisite for installing this patch on Windows. . Please download and install the ArcGIS Server 10.9.1 Setup Program Patch before attempting to install this patch.

Issues Addressed with this patch



Installing this patch on Windows


Installation Steps:


The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

  1. Download the appropriate file to a location other than your ArcGIS installation location.

  2. ArcGIS 10.9.1  
       
    ArcGIS Server ArcGIS-1091-S-MR-PatchB.msp
         Checksum
         (SHA256)
    D59DB0EF3A2FEBCA961A8E94A6D00B258D963F44E39780683CBCBB9655E7D0B6
       

  3. Make sure you have write access to your ArcGIS installation location.

  4. Double-click ArcGIS-1091-S-MR-PatchB.msp to start the setup process.

    NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:

    msiexec.exe /p [location of Patch]\ArcGIS-1091-S-MR-PatchB.msp


Installing this patch on Linux


Installation Steps:


Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder.

The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

  1. Download the appropriate file to a location other than your ArcGIS installation location.


    ArcGIS 10.9.1  
       
    ArcGIS Server ArcGIS-1091-S-MR-PatchB-linux.tar
         Checksum
         (SHA256)
    97C35C653EB680009042208D9638E2D700CFF722E92ABA1D4C3E9146388C239D
       

  2. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.

  3. Extract the specified tar file by typing:

    % tar -xvf ArcGIS-1091-S-MR-PatchB-linux.tar

  4. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.


    To uninstall this patch on Windows, open the Windows Control Panel and navigate to installed programs. Make sure that "View installed updates" (upper left side of the Programs and Features dialog) is active. Select the patch name from the programs list and click Uninstall to remove the patch.

Uninstalling this patch on Linux


    To remove this patch on versions 10.7 and higher, navigate to the <Product Installation Directory>/.Setup/qfe directory and run the following script as the ArcGIS Install owner:


    ./removepatch.sh

    The removepatch.sh script allows you to uninstall previously installed patches or hot fixes. Use the -s status flag to get the list of installed patches or hot fixes ordered by date. Use the -q flag to remove patches or hot fixes in reverse chronological order by date they were installed. Type removepatch -h for usage help.

    Restart your ArcGIS services

Patch Updates

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

December 8, 2021: New setups have been released for this patch. The new setups will install and replace the previously released version, an uninstall of the previously released patch is not necessary.

The ArcGIS Server 10.9.1 Setup Program Patch is a mandatory prerequisite for installing this patch on Windows. . Please download and install the ArcGIS Server 10.9.1 Setup Program Patch before attempting to install this patch.

How to identify which ArcGIS products are installed

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

Getting Help

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.