English

ArcGIS (Desktop, Engine, Server) 10.6.1 Spatial Analyst Patch

Summary

This patch addresses multiple quality issues with ArcGIS 10.6.1 Spatial Analyst extension including problems with Distance, Extraction, Hydrology and Zonal toolsets.

Description

Esri® announces the ArcGIS (Desktop, Engine, Server) 10.6.1 Spatial Analyst Patch. This patch addresses multiple quality issues with ArcGIS 10.6.1 Spatial Analyst extension including problems with Distance, Extraction, Hydrology, Zonal toolsets and more. The patch fixes a problem with the Raster To Polygon tool in the Conversion toolbox. The patch also addresses problems in the ConvertRasterToFeature, FlowDistance and SummarizeRasterWithin tasks in ArcGIS 10.6.1 Image Server. Esri recommends all customers using ArcGIS 10.6.1 Spatial Analyst and/or ArcGIS 10.6.1 Image Server install this patch. This patch deals specifically with the issue listed below under Issues Addressed with this patch.


Issues Addressed with this patch


  • BUG-000119993 - Extraction tools returning output with incorrect spatial reference when environment output coordinate system is set.
  • BUG-000119801 - Sample fails when more than one mosaic datasets are input as input rasters.
  • BUG-000119759 - Improve the quality and performance of the Sample tool.
  • BUG-000119534 - Path Allocation produces incorrect results when the source characteristics are specified.
  • BUG-000119493 - Sink tool creates two unique values for sink regions that are diagonally connected. This is incorrect as diagonally connected sinks should be identified with a single unique value.
  • BUG-000119425 - The SummarizeRasterWithin and ConvertRasterToFeature tasks in ArcGIS Image Server crashes when trying to directly read an input image service collocated on a cloud raster store.
  • BUG-000119424 - Zonal Geometry as Table and Zonal Geometry tools generate incorrect results when a field other than value was used. In this case, the logic for calculating zonal geometry properties is not correct, and the software may crash.
  • BUG-000119423 - Watershed tool hangs when processing extent is set to a single cell catchment.
  • BUG-000119422 - Flow distance tool in modelbuilder does not display 'FlowDistanceType' parameter.
  • BUG-000119421 - Flow Distance tool produces NoData for majority of cells when input surface raster is not hydro conditioned.
  • BUG-000119419 - Euclidean Direction using high resolution data produces incorrect output.
  • BUG-000119323 - RasterToPolygon with "Create multipart features" enabled, locks the output for editing.
  • BUG-000116589 - Cost Path and Cost Path as Polyline with flow direction input for backlink raster is slow.
  • BUG-000116047 - Cost Path produces incorrect output when Flow Direction raster is used as input for distance and backlink raster.
  • BUG-000113368 - Euclidean allocation, distance and direction tools are much slower in current version verses previous version of ArcMap.
  • BUG-000098315 - Sample return Null data, when input raster is Mosaic.
  • BUG-000096996 - ExtractMultiValuestoPoints, ExtractValuestoPoints returns error when the input points feature is a XY Event Layer.
To avoid conflicts this patch also addresses:
  • BUG-000115147 - When calling ITopologicalOperator::Buffer on a polygon, if the polygon is degenerated to a point, the buffer call crashes.

Installing this patch on Windows


Installation Steps:


The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

  1. Download the appropriate file to a location other than your ArcGIS installation location.

  2. ArcGIS 10.6.1   Checksum (Md5)
         
    ArcGIS Desktop
    Background Geoprocessing (64-bit)
    ArcGIS-1061-BGDT-SA-Patch.msp 2B45B69A3EA8A46F2B1F379C42EBF363
         
    ArcGIS Engine
    Background Geoprocessing (64-bit)
    ArcGIS-1061-BGE-SA-Patch.msp F82C9C01F4C78E85EC4902A2434E3C5C
         
    ArcGIS Desktop ArcGIS-1061-DT-SA-Patch.msp 4DE3444EAFD7076AE5A26750C7D491C3
         
    ArcGIS Engine ArcGIS-1061-E-SA-Patch.msp 9476CA5E728F83EBC1BF93C54E9CBB21
         
    ArcGIS for Server ArcGIS-1061-S-SA-Patch.msp 64C50E18DFDBEE073EF462EE9471A4DF
         

  3. Make sure you have write access to your ArcGIS installation location.

  4. Double-click ArcGIS-<Version>-<Product>-SA-Patch.msp to start the setup process.

    NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:

    msiexec.exe /p [location of Patch]\ArcGIS-<Version>-DT-SA-Patch.msp


Uninstalling this patch on Windows


    To uninstall this patch on Windows, open the Windows Control Panel and navigate to installed programs. Make sure that "View installed updates" (upper left side of the Programs and Features dialog) is active. Select the patch name from the programs list and click Uninstall to remove the patch.

Installing this patch on Linux


Installation Steps:


Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder.

The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

  1. Download the appropriate file to a location other than your ArcGIS installation location.


        Checksum (Md5)
         
    ArcGIS for Server ArcGIS-1061-S-SA-Patch-linux.tar 84B1FA071470FB4FAE83814C4FCECB9F
         

  2. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.

  3. Extract the specified tar file by typing:

    % tar -xvf ArcGIS-1061-<product>-SA-Patch-linux.tar

  4. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.


Uninstalling this patch on Windows


    To uninstall this patch on Windows, open the Windows Control Panel and navigate to installed programs. Make sure that "View installed updates" (upper left side of the Programs and Features dialog) is active. Select the patch name from the programs list and click Uninstall to remove the patch.

Uninstalling this patch on Linux


    Uninstalling on Linux is only available on version 10.5.1 or higher. To remove this patch, navigate to the /tmp directory and run the following script as the ArcGIS Install owner:

    ./patchremove

    Notes: You can only remove the patch that was installed most recently.
    Restart your ArcGIS services

Patch Updates

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

How to identify which ArcGIS products are installed

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

Getting Help

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.