English
Menu
Keyword Suggestions
Press esc to cancel suggestions
    Technical Support
    Back to results
    Print Share
    Is This Content Helpful? Search on GeoNet Submit to ArcGIS Ideas
    Back to top

    ArcSDE 9.2 Oracle Patch

    Summary

    This patch contains a fix for users who will be upgrading to ArcSDE 9.2 where their National Character set is UTF8.

    Description

    Issues Addressed with this Patch

      Oracle

      NIM005974 - SDE upgrade and service startup fail at checking existence of geometry_columns table.

    Installing the Patch

    ArcSDE 9.2 Service Pack 1 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using your SDE user account.

    REQUIRED INSTALL STEP: If you connect to ArcSDE 9.2 via an Application Server and Direct Connect connections using ArcGIS 9.2 or ArcIMS 9.2 make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

    Server Install for UNIX

    During installation, you can either save the original 9.2 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

    1. Important Note: Before installing this patch, you must check your sde_setup.log file to make sure that the following error message is not present:

      ERROR in creating GEOMETRY_COLUMNS table.
      Error: -51
      [....] DBMS error code: 2264
      ORA-02264: name already used by an existing constraint
      If you see this error message in you sde_setup.log file, you must log in to Oracle as the sde admin user and run the following SQL statement:
      RENAME GEOMETRY_COLUMNS_30 to GEOMETRY_COLUMNS;
      Once you complete this step, you may proceed with the installing this patch.

    2. Download the appropriate tar file to a location other than $SDEHOME:

      3. Oracle 9i
      HP64 sde92-oraclepatch-ora9i-hp64.tar
      8 MB
      IBM64 sde92-oraclepatch-ora9i-ibm64.tar
      6 MB
      Linux sde92-oraclepatch-ora9i-lx.tar
      5 MB
      Solaris64 sde92-oraclepatch-ora9i-slrs64.tar
      7 MB
      Tru64 sde92-oraclepatch-ora9i-tru64.tar
      8 MB
      Oracle 10gR2
      HP64 sde92-oraclepatch-ora10g-hp64.tar
      8 MB
      IBM64 sde92-oraclepatch-ora10g-ibm64.tar
      6 MB
      Linux sde92-oraclepatch-ora10g-lx.tar
      5 MB
      Solaris64 sde92-oraclepatch-ora10g-slrs64.tar
      7 MB

    3. Stop your current ArcSDE service.


      4. % sdemon -o shutdown

      NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

      # /usr/sbin/slibclean

      (Optional) To list the libraries loaded into memory, as ROOT user, type:

      # /usr/sbin/genkld

      For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

    4. Extract the specified tar file by typing:


      5. % tar -xvf sde92-oraclepatch-<Database>-<Platform>.tar

    5. Start the installation by typing:


      6. % ./applypatch

      This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

    6. Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

      7. ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY PROCEDURE
      CREATE ANY SEQUENCE
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE PROCEDURE
      CREATE PUBLIC SYNONYM
      CREATE SESSION
      CREATE SEQUENCE
      CREATE TABLE
      CREATE TRIGGER
      CREATE TYPE
      DROP ANY INDEX
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      DROP ANY TABLE
      DROP ANY VIEW
      DROP PUBLIC SYNONYM
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      SELECT ANY TABLE
      UNLIMITED TABLESPACE

    7. To upgrade, run sdesetup. Failure to do so may cause problems in starting the service or with connecting to the service. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:


      8. % sdesetup -o upgrade -d <ORACLE9I|ORACLE10G> -u sde -p <SDE_Admin_password>

    8. After the upgrade completes, you may revoke the following permissions from the SDE user account:

      ANALYZE ANY
      ALTER ANY INDEX
      ALTER ANY TABLE
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE TYPE

    9. Start your service again.


      10. % sdemon -o start

    Server Install for Windows


    Windows Installation Notes:

    Installation Steps


    1. Important Note: Before installing this patch, you must check your sde_setup.log file to make sure that the following error message is not present:

      ERROR in creating GEOMETRY_COLUMNS table.
      Error: -51
      [....] DBMS error code: 2264
      ORA-02264: name already used by an existing constraint
      If you see this error message in you sde_setup.log file, you must log in to Oracle as the sde admin user and run the following SQL statement:
      RENAME GEOMETRY_COLUMNS_30 to GEOMETRY_COLUMNS;
      Once you complete this step, you may proceed with the installing this patch.

    2. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.


    3. Download the appropriate files to a location other than the ArcSDE installation folder:

      4. Oracle 9i
      sde92-oraclepatch-ora9i-win.exe 2 MB
      Oracle 10gR2
      sde92-oraclepatch-ora10g-win.exe 2 MB

    4. Double-click the appropriate executable to start the install process.


    5. When Setup starts, follow the instructions on your screen.


    6. Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

      7. ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY PROCEDURE
      CREATE ANY SEQUENCE
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE PROCEDURE
      CREATE PUBLIC SYNONYM
      CREATE SESSION
      CREATE SEQUENCE
      CREATE TABLE
      CREATE TRIGGER
      CREATE TYPE
      DROP ANY INDEX
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      DROP ANY TABLE
      DROP ANY VIEW
      DROP PUBLIC SYNONYM
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      SELECT ANY TABLE
      UNLIMITED TABLESPACE

    7. To upgrade, run sdesetup. Failure to do so may cause problems in starting the service or with connecting to the service. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:


      8. % sdesetup -o upgrade -d <ORACLE9I|ORACLE10G> -u sde -p <SDE_Admin_password>

    8. After the upgrade completes, you may revoke the following permissions from the SDE user account:

      ANALYZE ANY
      ALTER ANY INDEX
      ALTER ANY TABLE
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE TYPE

    9. As the SDE user, run the following command to restart the ArcSDE service:

      sdemon -o start

    ArcSDE SDK Install for UNIX


    1. Important Note: Before installing this patch, you must check your sde_setup.log file to make sure that the following error message is not present:

      ERROR in creating GEOMETRY_COLUMNS table.
      Error: -51
      [....] DBMS error code: 2264
      ORA-02264: name already used by an existing constraint
      If you see this error message in you sde_setup.log file, you must log in to Oracle as the sde admin user and run the following SQL statement:
      RENAME GEOMETRY_COLUMNS_30 to GEOMETRY_COLUMNS;
      Once you complete this step, you may proceed with the installing this patch.

    2. Download the appropriate tar file to a location other than ArcSDE SDK installation location:

      3. HP64 sde92-oraclepatch-sdk-hp64.tar
      5 MB
      IBM64 sde92-oraclepatch-sdk-ibm64.tar
      4 MB
      Linux sde92-oraclepatch-sdk-lx.tar
      3 MB
      Solaris64 sde92-oraclepatch-sdk-slrs64.tar
      4 MB
      Tru64 sde92-oraclepatch-sdk-tru64.tar
      3 MB

    3. Extract the specified tar file by typing:


      4. % tar -xvf sde92-oraclepatch-sdk-<Platform>.tar

    4. Start the installation by typing:


      5. % ./applypatch

      This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

    ArcSDE SDK Install for Windows


    1. Make sure you have write access to the ArcSDE SDK installation folder.


    2. Download the appropriate files to a location other than the ArcSDE SDK installation folder:
      3. ArcSDE SDK sde92-oraclepatch-sdk-win.exe 3 MB

    3. Double-click the appropriate executable to start the install process.


    4. When Setup starts, follow the instructions on your screen.

    ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

      UNIX

      • If you connect to ArcSDE 9.2 using ArcInfo Workstation 9.2 or ArcIMS 9.2, please follow the steps below to install this Patch to your ArcInfo Workstation 9.2 installation directory under $ARCHOME, or ArcIMS 9.2 installation directory under $AIMSHOME:

        • Before you start, make sure you have write access to the (ArcInfo or ArcIMS) installation directory then download the appropriate compressed tar file to that location:

          Linux sde92-oraclepatch-esri-lx.tar.Z
          3 MB
          Tru64 sde92-oraclepatch-esri-tru64.tar.Z
          2 MB

        • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

        • Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:

          %cd <installation_directory> (i.e. cd $ARCHOME)
          %uncompress sde92-oraclepatch-esri-<Platform>.tar.Z
          %tar xvf sde92-oraclepatch-esri-<Platform>.tar

        • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).


      Windows

      • If you connect to ArcSDE 9.2 using ArcGIS 9.2, ArcIMS 9.2 or ArcInfo Workstation 9.2, please follow the steps below to install this Patch to your ArcGIS 9.2, ArcIMS 9.2 or ArcInfo Workstation 9.2 installation folder:

      • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:

        sde92-oraclepatch-esri-win.zip 3 MB

      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

      • Use WinZip to extract the new file from sde92-oraclepatch-esri-win.zip to the appropriate installation folder, see list below:

        • ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
        • ArcGIS Workstation - <installation-folder>\arcexe9x\bin
        • Depending on the ArcIMS Setup features installed, the SDE client file could be located in one or more of the following locations:
          • C:\Program Files\ArcGIS\bin
          • C:\Program Files\ArcGIS\ArcIMS\IndexBuilder
          • C:\Program Files\ArcGIS\ArcIMS\Metadata\Commands
          • C:\Program Files\ArcGIS\ArcIMS\Server\bin

      • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

    How to identify which Patch is installed


      UNIX

      To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.


        ArcGIS Engine Runtime
        ArcGIS Reader
        ArcGIS Server
        ArcIMS
        ArcInfo Workstation
        ArcSDE

      Extract the tar file by typing:


      % tar xvf PatchFinder.tar

      Run the utility by typing:


      % ./PatchFinder

      Windows

      To check for the presence of a Patch, for each file examine the unique identification information provided (right click, properties, version tab, item name, QFE Version). With only a few exceptions, all files modified as part of a Patch distribution can be uniquely identified in this manner. The identification string for this Patch should read:

        QFE-SDE-92-CQ00301549

    Patch Updates

    Check the Online Support Center periodically for the availability of additional Patches or Service Packs. New information about this Patch will be posted here.

      UPDATE 02/14/2007 - Now Available:

      • The Oracle9i download for Tru64.
      • The SDK download for Tru64.
      • The ESRI products connecting download for Tru64.

      UPDATE 02/07/2007 - Now Available:

      • The Oracle9i download for IBM64.

      UPDATE 02/05/2007 - Now Available:

      • The Oracle9i download for HP64.

      UPDATE 02/02/2007 - Now Available:

      • The Oracle10g download for HP64.
      • The SDK download for HP64.

      UPDATE 02/01/2007 - Now Available:

      • The Oracle9i download for Solaris64.
      • The Oracle10g download for IBM64.
      • The SDK download for IBM64.

      UPDATE 01/31/2007 - Now Available:

      • The Oracle10g download for Solaris64.
      • The SDK download for Solaris64.

      UPDATE 01/30/2007 - Now Available:

      • The Oracle9i download for Linux.

    Getting Help

    Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.

    Published: 1/26/2007
    Download ID: 1241
    Questions or issues with the site? Send Feedback