ArcSDE 9.1 General Update Patch 3
This Patch contains performance improvements and maintenance fixes. All users should download and install this required Patch as soon as possible.
Description
- Issues Fixed with this Patch
- Files Installed in this Patch
- Installing this Patch
Server
UNIX
Windows
ArcSDE SDK
UNIX
Windows
ESRI Products connecting to ArcSDE (Application and Direct Connect connections)
UNIX
Windows
- How to identify which Patch is installed
- Patch Updates
- Getting Help
Important Note
Oracle Users with Oracle Locator and Spatial and All SQL Server Users
- If you installed the ArcSDE 9.1 General Update Patch 3 (9.1 GUP3) prior to
November 3, 2006, please download the updated setup file for your installation
and re-apply the Patch. The reason for this is that after our initial release
of 9.1 GUP3 we discovered that the setup file did not contain all the updates.
Please accept our apologies for any inconvenience that this may have caused.
Installing the Patch
ArcSDE 9.1 Service Pack 2 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using your SDE user account.
REQUIRED INSTALL STEP: If you connect to ArcSDE 9.1 via an Application Server and Direct Connect connections using ArcGIS 9.1, ArcIMS 9.1, or ArcView GIS 3.3 with DBA 2.1g make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).
Server Install for UNIX
During installation, you can either save the original 9.1 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.
- Download the appropriate tar file to a location other than $SDEHOME:
- Stop your current ArcSDE service.
- Extract the specified tar file by typing:
- Start the installation by typing:
- (Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:
- To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example:
- Start your service again.
DB2 | |
HP-UX 64 sde91-genpatch3-db2-hp64.tar |
33 MB
|
IBM sde91-genpatch3-db2-ibm.tar |
40 MB
|
IBM64 sde91-genpatch3-db2-ibm64.tar |
39 MB
|
Linux sde91-genpatch3-db2-lx.tar |
32 MB
|
Solaris64 sde91-genpatch3-db2-slrs64.tar |
47 MB
|
Informix | |
HP-UX sde91-genpatch3-inf-hp.tar |
31 MB
|
IBM sde91-genpatch3-inf-ibm.tar |
40 MB
|
Solaris sde91-genpatch3-inf-slrs.tar |
45 MB
|
Oracle 8i | |
HP-UX sde91-genpatch3-ora8i-hp.tar |
58 MB
|
IBM sde91-genpatch3-ora8i-ibm.tar |
42 MB
|
Solaris sde91-genpatch3-ora8i-slrs.tar |
48 MB
|
Tru64 sde91-genpatch3-ora8i-tru64.tar |
43 MB
|
Oracle 9i | |
HP-UX 64 sde91-genpatch3-ora9i-hp64.tar |
36 MB
|
IBM64 sde91-genpatch3-ora9i-ibm64.tar |
41 MB
|
Linux sde91-genpatch3-ora9i-lx.tar |
34 MB
|
Solaris sde91-genpatch3-ora9i-slrs.tar |
47 MB
|
Solaris64 sde91-genpatch3-ora9i-slrs64.tar |
49 MB
|
Tru64 sde91-genpatch3-ora9i-tru64.tar |
43 MB
|
Oracle 10g | |
HP-UX 64 sde91-genpatch3-ora10g-hp64.tar |
36 MB
|
IBM64 sde91-genpatch3-ora10g-ibm64.tar |
41 MB
|
Linux sde91-genpatch3-ora10g-lx.tar |
33 MB
|
Solaris64 sde91-genpatch3-ora10g-slrs64.tar |
49 MB
|
% sdemon -o shutdown
NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:
# /usr/sbin/slibclean
(Optional) To list the libraries loaded into memory, as ROOT user, type:
# /usr/sbin/genkld
For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.
% tar -xvf sde91-genpatch3-<Database>-<Platform>.tar
% ./applypatch
This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.
ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY PROCEDURE
CREATE ANY SEQUENCE
CREATE ANY TRIGGER
CREATE ANY VIEW
CREATE SESSION
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
SELECT ANY TABLE
UNLIMITED TABLESPACE
After the upgrade completes, you may revoke the following permissions from
the SDE user account:
ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY TRIGGER
CREATE ANY VIEW
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
% sdesetupora9i -o upgrade –u sde –p sdepassword
% sdemon -o start
Server Install for Windows
Windows Installation Notes:
ArcSDE 9.1 Service Pack 2 must be installed on the server and your client applications before you install this Patch.
Installation Steps
- Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.
- Download the appropriate files to a location other than the ArcSDE installation folder:
- Double-click the appropriate executable to start the install process.
- When Setup starts, follow the instructions on your screen.
- (Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:
- To upgrade, run sdesetup<dbms>. Failure to do so may cause problems
in starting the service or with connecting to the service. Using Oracle 9i
as an example:
sdesetupora9i -o upgrade
- As the SDE user, run the following command to restart the ArcSDE service:
sdemon -o start
DB2 | |
sde91-genpatch3-db2-win.exe | 3 MB |
Informix | |
sde91-genpatch3-inf-win.exe | 3 MB |
Oracle 8i | |
sde91-genpatch3-ora8i-win.exe | 3 MB |
Oracle 9i | |
sde91-genpatch3-ora9i-win.exe | 3 MB |
Oracle 10g | |
sde91-genpatch3-ora10g-win.exe | 3 MB |
SQL Server | |
sde91-genpatch3-sql-win.exe | 3 MB |
ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY PROCEDURE
CREATE ANY SEQUENCE
CREATE ANY TRIGGER
CREATE ANY VIEW
CREATE SESSION
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
SELECT ANY TABLE
UNLIMITED TABLESPACE
After the upgrade completes, you may revoke the following permissions from
the SDE user account:
ALTER ANY INDEX
ALTER ANY TABLE
ANALYZE ANY
CREATE ANY INDEX
CREATE ANY TRIGGER
CREATE ANY VIEW
DROP ANY INDEX
DROP ANY TABLE
DROP ANY VIEW
DROP ANY PROCEDURE
DROP ANY SEQUENCE
EXECUTE ANY PROCEDURE
SELECT ANY SEQUENCE
ArcSDE SDK Install for UNIX
- Download the appropriate tar file to a location other than ArcSDE SDK installation location:
- Extract the specified tar file by typing:
- Start the installation by typing:
All Databases (32 bit Operating System) | |
HP-UX sde91-genpatch3-sdk-hp.tar |
15 MB
|
IBM sde91-genpatch3-sdk-ibm.tar |
12 MB
|
Linux sde91-genpatch3-sdk-lx.tar |
9 MB
|
Solaris sde91-genpatch3-sdk-slrs.tar |
12 MB
|
All Databases (64 bit Operating System) | |
HP-UX 64 sde91-genpatch3-sdk-hp64.tar |
13 MB
|
IBM64 sde91-genpatch3-sdk-ibm64.tar |
13 MB
|
Solaris64 sde91-genpatch3-sdk-slrs64.tar |
12 MB
|
Tru64 sde91-genpatch3-sdk-tru64.tar |
17 MB
|
% tar -xvf sde91-genpatch3-sdk-<Platform>.tar
% ./applypatch
This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.
ArcSDE SDK Install for Windows
- Make sure you have write access to the ArcSDE SDK installation folder:.
- Download the appropriate files to a location other than the ArcSDE SDK installation folder:
- Double-click the appropriate executable to start the install process.
- When Setup starts, follow the instructions on your screen.
ArcSDE SDK sde91-genpatch3-sdk-win.exe | 8 MB |
ArcSDE Java SDK sde91-genpatch3-javasdk-win.exe | 2 MB |
ESRI Products connecting to ArcSDE (Application and Direct Connect connections).
- If you connect to ArcSDE 9.1 using ArcGIS 9.1 Workstation or ArcIMS 9.1 on any supported Unix/Linux platform please follow the steps below to install this Patch to your ArcGIS 9.1 or ArcIMS 9.1 software installation directory. This also applies if connecting to ArcSDE 9.1 using ArcGIS Server, ArcGIS Engine, and ArcGIS Reader for Sun Solaris and Linux:
- Before you start, make sure you have write access to the installation directory then download the appropriate compressed
tar file to that location:
HP-UX sde91-genpatch3-esri-hp.tar.Z 14 MBIBM sde91-genpatch3-esri-ibm.tar.Z 12 MBLinux sde91-genpatch3-esri-lx.tar.Z 9 MBSolaris sde91-genpatch3-esri-slrs.tar.Z 11 MBTru64 sde91-genpatch3-esri-tru64.tar.Z 17 MB
-
ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
-
Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:
%cd <installation_directory> (i.e. cd $ARCHOME)
- <Workstation Installation Directory>/lib
- <ArcIMS Installation Directory>/lib
- <ArcGIS Server Installation Directory>/bin
- <ArcGIS Engine Installation Directory>/bin
- <ArcGIS Reader Installation Directory>/bin
%tar xvf sde91-genpatch3-esri-<Platform>.tar
- <Workstation Installation Directory>/lib
-
ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).
- Before you start, make sure you have write access to the installation directory then download the appropriate compressed
tar file to that location:
- If you connect to ArcSDE 9.1 using ArcGIS 9.1, ArcIMS 9.1, ArcInfo
Workstation 9.1, or ArcView GIS 3.3 with DBA 2.1g, please follow the steps
below to install this Patch to your ArcGIS 9.1, ArcIMS 9.1, ArcInfo Workstation
9.1, or ArcView GIS 3.3 with DBA 2.1g installation folder:
- Before you start, make sure you have write access to the installation
folder, then download the zip file to that location:
sde91-genpatch3-esri-win.zip 9 MB
-
ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
- Use WinZip to extract the new file from sde91-genpatch3-esri-win.zip to the
appropriate installation folder, see list below:
- ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
- ArcGIS Workstation - <installation-folder>\arcexe9x\bin
- ArcView GIS - <installation-folder>\av_gis30\arcview\(bin32
& DCONNECT\LIB)
- Depending on the ArcIMS Setup features installed, the SDE client file
could be located in one or more of the following locations:
- C:\Program Files\ArcGIS\bin
- C:\Program Files\ArcGIS\ArcIMS\IndexBuilder
- C:\Program Files\ArcGIS\ArcIMS\Metadata\Commands
- C:\Program Files\ArcGIS\ArcIMS\Server\bin
- C:\Program Files\ArcGIS\bin
- ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
-
ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).
How to identify which Patch is installed
-
UNIX
To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.
ArcGIS Engine Runtime
ArcGIS Reader
ArcGIS Server
ArcIMS
ArcInfo Workstation
ArcSDE
Extract the tar file by typing:
% tar xvf PatchFinder.tar
Run the utility by typing:
% ./PatchFinder
To check for the presence of a Patch, for each file examine the unique identification information provided (right click, properties, version tab, item name, QFE Version). With only a few exceptions, all files modified as part of a Patch distribution can be uniquely identified in this manner. The identification string for this Patch should read:
QFE-SDE-91-CQ00296780
Patch Updates
Check the Online Support Center periodically for the availability of additional Patches or Service Packs. New information about this Patch will be posted here.
- The ArcSDE Oracle9i download for IBM 64-bit.
UPDATE 11/27/2006 - Now Available:
- The ArcSDE Oracle10g downloads for IBM 64-bit and Solaris 64-bit.
- The ArcSDE Oracle9i download for Solaris 64-bit.
- The ArcSDE Oracle8i downloads for IBM and Solaris.
UPDATE 11/22/2006 - Now Available:
- The ArcSDE DB2 downloads for all supported platforms.
- The ArcSDE Informix downloads all supported platforms.
- The ArcSDE SDK downloads for IBM, IBM 64-bit, and Solaris 64-bit.
- The ESRI Products download for IBM.
UPDATE 11/21/2006 - Now Available:
- The ArcSDE Oracle8i downloads for HP-UX and HP Tru64. (Server, SDK and ESRI Products)
- The ArcSDE Oracle9i downloads for HP Tru64. (Server and SDK)
- The ArcSDE Oracle10g download for HP-UX 64-bit. (Server)
UPDATE 11/17/2006 - Now Available:
- The ArcSDE Oracle10g download for Linux.
UPDATE 11/15/2006 - Now Available:
- The ArcSDE Oracle9i downloads for Linux. (Server, SDK and ESRI Products)
- The ArcSDE Oracle8i download for Windows.
- The ArcSDE Oracle10g download for Windows.
UPDATE 11/14/2006 - Now Available:
- The ArcSDE Oracle9i download for Windows.
UPDATE 11/13/2006 - Now Available:
-
UPDATE 11/09/2006 - Oracle Users with Oracle Locator and Spatial
and All SQL Server Users - If you installed the ArcSDE 9.1 General Update
Patch 3 (9.1 GUP3) prior to November 3, 2006, please download the updated setup
file for your installation and re-apply the Patch. The reason for this is that
after our initial release of 9.1 GUP3 we discovered that the setup file did
not contain all the updates. Please accept our apologies for any inconvenience
that this may have caused.
- Operating System for HP is now listed as HP-UX to alleviate any confusion between HP-UX and HP TRU64.
UPDATE 06/01/2007 - Text update:
Getting Help
Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Patch. International sites, please contact your local ESRI software distributor.