Skip to Content

Patches and updates

ArcSDE 9.1 General Update Patch 3

Published: October 31, 2006

Summary

This Patch contains performance improvements and maintenance fixes. All users should download and install this required Patch as soon as possible.

Description

Oracle Users with Oracle Locator and Spatial and All SQL Server Users - If you installed the ArcSDE 9.1 General Update Patch 3 (9.1 GUP3) prior to November 3, 2006, please download the updated setup file for your installation and re-apply the Patch. The reason for this is that after our initial release of 9.1 GUP3 we discovered that the setup file did not contain all the updates. Please accept our apologies for any inconvenience that this may have caused.

Installing the Patch

ArcSDE 9.1 Service Pack 2 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using your SDE user account.

REQUIRED INSTALL STEP: If you connect to ArcSDE 9.1 via an Application Server and Direct Connect connections using ArcGIS 9.1, ArcIMS 9.1, or ArcView GIS 3.3 with DBA 2.1g make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

Server Install for UNIX

During installation, you can either save the original 9.1 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

  1. Download the appropriate tar file to a location other than $SDEHOME:
  2. Stop your current ArcSDE service.

    % sdemon -o shutdown

    NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

    # /usr/sbin/slibclean

    (Optional) To list the libraries loaded into memory, as ROOT user, type:

    # /usr/sbin/genkld

    For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

  3. Extract the specified tar file by typing:

    % tar -xvf sde91-genpatch3-<Database>-<Platform>.tar

  4. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  5. (Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:
    • ALTER ANY INDEX
    • ALTER ANY TABLE
    • ANALYZE ANY
    • CREATE ANY INDEX
    • CREATE ANY PROCEDURE
    • CREATE ANY SEQUENCE
    • CREATE ANY TRIGGER
    • CREATE ANY VIEW
    • CREATE SESSION
    • DROP ANY INDEX
    • DROP ANY TABLE
    • DROP ANY VIEW
    • DROP ANY PROCEDURE
    • DROP ANY SEQUENCE
    • EXECUTE ANY PROCEDURE
    • SELECT ANY SEQUENCE
    • SELECT ANY TABLE
    • UNLIMITED TABLESPACE


    After the upgrade completes, you may revoke the following permissions from the SDE user account:

    • ALTER ANY INDEX
    • ALTER ANY TABLE
    • ANALYZE ANY
    • CREATE ANY INDEX
    • CREATE ANY TRIGGER
    • CREATE ANY VIEW
    • DROP ANY INDEX
    • DROP ANY TABLE
    • DROP ANY VIEW
    • DROP ANY PROCEDURE
    • DROP ANY SEQUENCE
    • EXECUTE ANY PROCEDURE
    • SELECT ANY SEQUENCE

  6. To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example:

    % sdesetupora9i -o upgrade –u sde –p sdepassword

  7. Start your service again.

    % sdemon -o start

 

Server Install for Windows

  • Windows Installation Notes:

 

Installation Steps

  1. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.
  2. Download the appropriate files to a location other than the ArcSDE installation folder:
  3. Double-click the appropriate executable to start the install process.
  4. When Setup starts, follow the instructions on your screen.
  5. (Oracle only) Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

    • ALTER ANY INDEX
    • ALTER ANY TABLE
    • ANALYZE ANY
    • CREATE ANY INDEX
    • CREATE ANY PROCEDURE
    • CREATE ANY SEQUENCE
    • CREATE ANY TRIGGER
    • CREATE ANY VIEW
    • CREATE SESSION
    • DROP ANY INDEX
    • DROP ANY TABLE
    • DROP ANY VIEW
    • DROP ANY PROCEDURE
    • DROP ANY SEQUENCE
    • EXECUTE ANY PROCEDURE
    • SELECT ANY SEQUENCE
    • SELECT ANY TABLE
    • UNLIMITED TABLESPACE
    • ALTER ANY INDEX
    • ALTER ANY TABLE
    • ANALYZE ANY
    • CREATE ANY INDEX
    • CREATE ANY TRIGGER
    • CREATE ANY VIEW
    • DROP ANY INDEX
    • DROP ANY TABLE
    • DROP ANY VIEW
    • DROP ANY PROCEDURE
    • DROP ANY SEQUENCE
    • EXECUTE ANY PROCEDURE
    • SELECT ANY SEQUENCE



  6. To upgrade, run sdesetup<dbms>. Failure to do so may cause problems in starting the service or with connecting to the service. Using Oracle 9i as an example:

    sdesetupora9i -o upgrade

  7. As the SDE user, run the following command to restart the ArcSDE service:

    sdemon -o start

  8.  

ArcSDE SDK Install for UNIX

  1. Download the appropriate tar file to a location other than ArcSDE SDK installation location:
    All Databases (32 bit Operating System)  
    HP-UX sde91-genpatch3-sdk-hp.tar
    15 MB
    IBM sde91-genpatch3-sdk-ibm.tar
    12 MB
    Linux sde91-genpatch3-sdk-lx.tar
    9 MB
    Solaris sde91-genpatch3-sdk-slrs.tar
    12 MB
       
    All Databases (64 bit Operating System)  
    HP-UX 64 sde91-genpatch3-sdk-hp64.tar
    13 MB
    IBM64 sde91-genpatch3-sdk-ibm64.tar
    13 MB
    Solaris64 sde91-genpatch3-sdk-slrs64.tar
    12 MB
    Tru64 sde91-genpatch3-sdk-tru64.tar
    17 MB

  2. Extract the specified tar file by typing:

    % tar -xvf sde91-genpatch3-sdk-<Platform>.tar

  3. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

 

ArcSDE SDK Install for Windows

  1. Make sure you have write access to the ArcSDE SDK installation folder:.
  2. Download the appropriate files to a location other than the ArcSDE SDK installation folder:
  3. ArcSDE SDK sde91-genpatch3-sdk-win.exe 8 MB
    ArcSDE Java SDK sde91-genpatch3-javasdk-win.exe 2 MB

  4. Double-click the appropriate executable to start the install process.
  5. When Setup starts, follow the instructions on your screen.

ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

  • UNIX

    • If you connect to ArcSDE 9.1 using ArcGIS 9.1 Workstation or ArcIMS 9.1 on any supported Unix/Linux platform please follow the steps below to install this Patch to your ArcGIS 9.1 or ArcIMS 9.1 software installation directory. This also applies if connecting to ArcSDE 9.1 using ArcGIS Server, ArcGIS Engine, and ArcGIS Reader for Sun Solaris and Linux:

      • Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:


      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

      • Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:

        %cd <installation_directory> (i.e. cd $ARCHOME)

        • <Workstation Installation Directory>/lib
        • <ArcIMS Installation Directory>/lib
        • <ArcGIS Server Installation Directory>/bin
        • <ArcGIS Engine Installation Directory>/bin
        • <ArcGIS Reader Installation Directory>/bin
        %uncompress sde91-genpatch3-esri-<Platform>.tar.Z
        %tar xvf sde91-genpatch3-esri-<Platform>.tar


        • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

      Windows

      • If you connect to ArcSDE 9.1 using ArcGIS 9.1, ArcIMS 9.1, ArcInfo Workstation 9.1, or ArcView GIS 3.3 with DBA 2.1g, please follow the steps below to install this Patch to your ArcGIS 9.1, ArcIMS 9.1, ArcInfo Workstation 9.1, or ArcView GIS 3.3 with DBA 2.1g installation folder:

      • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:


      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

      • Use WinZip to extract the new file from sde91-genpatch3-esri-win.zip to the appropriate installation folder, see list below:

        • ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
        • ArcGIS Workstation - <installation-folder>\arcexe9x\bin
        • ArcView GIS - <installation-folder>\av_gis30\arcview\(bin32 & DCONNECT\LIB)
        • Depending on the ArcIMS Setup features installed, the SDE client file could be located in one or more of the following locations:
          • C:\Program Files\ArcGIS\bin
          • C:\Program Files\ArcGIS\ArcIMS\IndexBuilder
          • C:\Program Files\ArcGIS\ArcIMS\Metadata\Commands
          • C:\Program Files\ArcGIS\ArcIMS\Server\bin

      • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

    How to identify which Patch is installed


    UNIX

    To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which servicepacks have been installed. The PatchFinder utility searches for thefollowing ArcGIS products.

    • ArcGIS Engine Runtime
    • ArcGIS Reader
    • ArcGIS Server
    • ArcIMS
    • ArcInfo Workstation
    • ArcSDE

    Extract the tar file by typing:

    % tar xvf PatchFinder.tar


    Run the utility by typing:

    % ./PatchFinder


    Windows

    To check for the presence of a Patch, for each file examine the unique identification information provided (right click, properties, version tab, item name, QFE Version). With only a few exceptions, all files modified as part of a Patch distribution can be uniquely identified in this manner. The identification string for this Patch should read:

    • QFE-SDE-91-CQ00296780

    • UPDATE 11/27/2006 - Now Available:

      • The ArcSDE Oracle9i download for IBM 64-bit.
    • UPDATE 11/22/2006 - Now Available:

      • The ArcSDE Oracle10g downloads for IBM 64-bit and Solaris 64-bit.
      • The ArcSDE Oracle9i download for Solaris 64-bit.
      • The ArcSDE Oracle8i downloads for IBM and Solaris.
    • UPDATE 11/21/2006 - Now Available:

      • The ArcSDE DB2 downloads for all supported platforms.
      • The ArcSDE Informix downloads all supported platforms.
      • The ArcSDE SDK downloads for IBM, IBM 64-bit, and Solaris 64-bit.
      • The ESRI Products download for IBM.
    • UPDATE 11/17/2006 - Now Available:

      • The ArcSDE Oracle8i downloads for HP-UX and HP Tru64. (Server, SDK and ESRI Products)
      • The ArcSDE Oracle9i downloads for HP Tru64. (Server and SDK)
      • The ArcSDE Oracle10g download for HP-UX 64-bit. (Server)
    • UPDATE 11/15/2006 - Now Available:

      • The ArcSDE Oracle10g download for Linux.
    • UPDATE 11/14/2006 - Now Available:

      • The ArcSDE Oracle9i downloads for Linux. (Server, SDK and ESRI Products)
      • The ArcSDE Oracle8i download for Windows.
      • The ArcSDE Oracle10g download for Windows.
    • UPDATE 11/13/2006 - Now Available:

      • The ArcSDE Oracle9i download for Windows.
    • UPDATE 11/09/2006 - Oracle Users with Oracle Locator and Spatial and All SQL Server Users - If you installed the ArcSDE 9.1 General Update Patch 3 (9.1 GUP3) prior to November 3, 2006, please download the updated setup file for your installation and re-apply the Patch. The reason for this is that after our initial release of 9.1 GUP3 we discovered that the setup file did not contain all the updates. Please accept our apologies for any inconvenience that this may have caused.
    • UPDATE 06/01/2007 - Text update:

      • Operating System for HP is now listed as HP-UX to alleviate any confusion between HP-UX and HP TRU64.
  • Patch Updates

    Check the Online Support Center periodically for the availability of additional Patches or Service Packs. New information about this Patch will be posted here.

    Getting Help

    Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Patch. International sites, please contact your local ESRI software distributor.



Download ID:1198

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options