ArcSDE 9.0 Versioning Patch
This Patch contains fixes for versioned updates and compress. Users working in a versioning environment should download and install this patch at their earliest convenience.
Description
- Issues Fixed with this Patch
- Files Installed in this Patch
- Installing this Patch
Server
UNIX
Windows
ArcSDE SDK
UNIX
Windows
ESRI Products connecting to ArcSDE (Application and Direct Connect connections)
UNIX
Windows
- How to identify which Patch is installed
- Patch Updates
- Getting Help
Installing the Patch
ArcSDE 9.0 General Update Patch 2 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using your SDE user account.
REQUIRED INSTALL STEP: If you connect to ArcSDE 9.0 via an Application Server and Direct Connect connections using ArcGIS 9.0, ArcIMS 9.0, or ArcView GIS 3.3 with DBA 2.1f make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).
Server Install for UNIX
Installation Steps:
During installation, you can either save the original 9.0 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.
- Download the appropriate tar file to a location other than $SDEHOME:
- Stop your current ArcSDE service.
- Extract the specified tar file by typing:
- Start the installation by typing:
- Start your service again.
DB2 | |
HP64 sde90-versionpatch-db2-hp64.tar |
9 MB
|
IBM sde90-versionpatch-db2-ibm.tar |
8 MB
|
IBM64 sde90-versionpatch-db2-ibm64.tar |
8 MB
|
Linux sde90-versionpatch-db2-lx.tar |
7 MB
|
Solaris64 sde90-versionpatch-db2-slrs64.tar |
9 MB
|
Informix | |
HP sde90-versionpatch-inf-hp.tar |
9 MB
|
IBM sde90-versionpatch-inf-ibm.tar |
8 MB
|
Solaris sde90-versionpatch-inf-slrs.tar |
8 MB
|
Oracle 8i | |
HP sde90-versionpatch-ora8i-hp.tar |
15 MB
|
IBM sde90-versionpatch-ora8i-ibm.tar |
9 MB
|
Solaris sde90-versionpatch-ora8i-slrs.tar |
10 MB
|
Tru64 sde90-versionpatch-ora8i-tru64.tar |
14 MB
|
Oracle 9i (Use these with Oracle 10g) | |
HP64 sde90-versionpatch-ora9i-hp64.tar |
11 MB
|
IBM64 sde90-versionpatch-ora9i-ibm64.tar |
9 MB
|
Linux sde90-versionpatch-ora9i-lx.tar |
8 MB
|
Solaris sde90-versionpatch-ora9i-slrs.tar |
10 MB
|
Solaris64 sde90-versionpatch-ora9i-slrs64.tar |
10 MB
|
Tru64 sde90-versionpatch-ora9i-tru64.tar |
14 MB
|
% sdemon -o shutdown
% tar -xvf sde90-versionpatch-<Database>-<Platform>.tar
% ./applypatch
This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.
% sdemon -o start
Server Install for Windows
Windows Installation Notes:
For all databases (except for SQL Server), ArcSDE
9.0 General Update Patch 2 must be installed on the server and your client applications
before you install this Patch.
Installation Steps
- Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.
- Download the appropriate files to a location other than the ArcSDE installation folder:
- Double-click the appropriate executable to start the install process.
- When Setup starts, follow the instructions on your screen.
- As the SDE user, run the following command to restart the ArcSDE service:
sdemon -o start
DB2 | |
sde90-versionpatch-db2-win.exe | 2 MB |
Informix | |
sde90-versionpatch-inf-win.exe | 2 MB |
Oracle 8i | |
sde90-versionpatch-ora8i-win.exe | 2 MB |
Oracle 9i (Use this with Oracle 10g) | |
sde90-versionpatch-ora9i-win.exe | 2 MB |
SQL Server | |
sde90-versionpatch-sql-win.exe | 2 MB |
ArcSDE SDK Install for UNIX
Installation Steps
- Download the appropriate tar file to a location other than ArcSDE SDK installation location:
- Extract the specified tar file by typing:
- Start the installation by typing:
All Databases (32 bit Operating System) | |
HP sde90-versionpatch-sdk-hp.tar |
8 MB
|
IBM sde90-versionpatch-sdk-ibm.tar |
6 MB
|
Linux sde90-versionpatch-sdk-lx.tar |
3 MB
|
Solaris sde90-versionpatch-sdk-slrs.tar |
6 MB
|
All Databases (64 bit Operating System) | |
HP64 sde90-versionpatch-sdk-hp64.tar |
4 MB
|
IBM64 sde90-versionpatch-sdk-ibm64.tar |
4 MB
|
Solaris64 sde90-versionpatch-sdk-slrs64.tar |
4 MB
|
Tru64 sde90-versionpatch-sdk-tru64.tar |
10 MB
|
% tar -xvf sde90-versionpatch-sdk-<Platform>.tar
% ./applypatch
This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.
ArcSDE SDK Install for Windows
Installation Steps
- Make sure you have write access to the ArcSDE SDK installation folder:.
- Download the appropriate files to a location other than the ArcSDE SDK installation folder:
- Double-click the appropriate executable to start the install process.
- When Setup starts, follow the instructions on your screen.
ArcSDE SDK sde90-versionpatch-sdk-win.exe | 6 MB |
ESRI Products connecting to ArcSDE (Application and Direct Connect connections).
- If you connect to ArcSDE 9.0 using ArcGIS 9.0 Workstation or ArcIMS 9.0
SP3 on any supported Unix/Linux platform please follow the steps below to
install this Service Pack to your ArcGIS 9.0 software installation directory.
This also applies if connecting to ArcSDE 9.0 using ArcGIS Server, ArcGIS
Engine, and ArcGIS Reader for Sun Solaris and Linux:
- Before you start, make sure you have write access to the installation
directory then download the appropriate compressed tar file to that
location:
HP sde90-versionpatch-esri-hp.tar.Z 8 MBIBM sde90-versionpatch-esri-ibm.tar.Z 6 MBLinux sde90-versionpatch-esri-lx.tar.Z 3 MBSolaris sde90-versionpatch-esri-slrs.tar.Z 6 MBTru64 sde90-versionpatch-esri-tru64.tar.Z 10 MB
-
ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
-
Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:
%cd <installation_directory> (i.e. cd $ARCHOME or $AGSHOME)
- <Workstation Installation Directory>/lib
- <ArcGIS Server Installation Directory>/bin
- <ArcGIS Engine Installation Directory>/bin
- <ArcGIS Reader Installation Directory>/bin
%tar xvf sde90-versionpatch-esri-<Platform>.tar
- <Workstation Installation Directory>/lib
-
ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).
- Before you start, make sure you have write access to the installation
directory then download the appropriate compressed tar file to that
location:
- If you connect to ArcSDE 9.0 using ArcGIS 9.0, ArcIMS 9.0, ArcInfo Workstation
9.0, or ArcView GIS 3.3 with DBA 2.1f, please follow the steps below to
install this Patch to your ArcGIS 9.0, ArcIMS 9.0, ArcInfo Workstation 9.0,
or ArcView GIS 3.3 with DBA 2.1f installation folder:
- Before you start, make sure you have write access to the installation
folder, then download the zip file to that location:
sde90-versionpatch-esri-win.zip 6 MB
-
ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
- Use WinZip to extract the new file from sde90-versionpatch-esri-win.zip
to the appropriate installation folder, see list below:
- ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
- ArcGIS Workstation - <installation-folder>\arcexe9x\bin
- ArcView GIS - <installation-folder>\av_gis30\arcview\(bin32
& DCONNECT\LIB)
- Depending on the ArcIMS Setup features installed, the SDE client file
could be located in one or more of the following locations:
- C:\Program Files\ArcGIS\bin
- C:\Program Files\ArcGIS\ArcIMS\IndexBuilder
- C:\Program Files\ArcGIS\ArcIMS\Metadata\Commands
- C:\Program Files\ArcGIS\ArcIMS\Server\bin
- C:\Program Files\ArcGIS\bin
- ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
-
ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).
How to identify which Patch is installed
-
UNIX
Any modified UNIX executables (or libraries) being sent out as part of a Patch will return the unique identification number for that fix when checked with the "what" command for UNIX and the "strings" command for Linux. For example, to display the identification string for this Patch on UNIX, type:
%what gsrvr.static | grep QFE
QFE-SDE-90-CQ00291858
To check for the presence of a Patch, for each file examine the unique identification information provided (right click, properties, version tab, item name, QFE Version). With only a few exceptions, all files modified as part of a Patch distribution can be uniquely identified in this manner. The identification string for this Patch should read:
QFE-SDE-90-CQ00291858
Patch Updates
Check the Online Support Center periodically for the availability of additional Patches or Service Packs. New information about this Patch will be posted here.
- The ArcSDE DB2 and Informix downloads.
UPDATE 7/31/2006 - Now Available:
Getting Help
Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Patch. International sites, please contact your local ESRI software distributor.