Patches and updates

ArcGIS Server Branch Versioning Data Consistency Patch

Summary

Esri announces the ArcGIS Server Branch Versioning Data Consistency Patch. If you are using ArcGIS Enterprise 11.1, 10.9.1 or 10.8.1 and utilizing branch versioning, this patch resolves the possibility of data inconsistencies that may arise under race conditions where concurrent requests attempt to modify a version. These issues are resolved by ensuring that requests are serialized, and that necessary branch versioning metadata is maintained correctly. You must upgrade the geodatabase after applying this patch to avoid the possibility of data inconsistencies as well as to resolve these inconsistencies should they be present. This patch deals specifically with the issues listed below under Issues Addressed with this Patch.

If you are using branch versioning with ArcGIS Enterprise and the geodatabase upgrade reports that recovery versions were created, please refer to “HowTo: Review branch recovery versions after upgrading an enterprise geodatabase” for information on how to keep or discard edits from recovery versions.

Note: If the geodatabase release you are using is at a higher release than the patch, you will need to upgrade from software at the same or higher release. These specific releases are listed / updated in the knowledge-based article mentioned above. Please contact Technical Support if you are having any issues with upgrading your geodatabase.

Issues addressed with this patch

BUG-000166704 - Serialize StopEditing REST Request to ensure a single writer.
BUG-000166701 - Upgrading a geodatabase should resolve branch versioning metadata and data inconsistencies.
BUG-000162289 - Branch versioning query performance.
BUG-000158886 - Branch Versions may be created with an incorrect identity or parameters under certain circumstances.
BUG-000157087 - Saving a version should not remove branch versioning metadata from previous edit sessions.
BUG-000156349 - The reconcile process may timeout while an operation is being completed on Default.

To avoid conflicts, the 11.1 version also addresses:

BUG-000164231 - Low performance with utility network maps in all JavaScript 4.x applications.
BUG-000163235 - Slow performance when running ArcGIS Utility Network 'Upstream trace'.
BUG-000162973 - Remove the option recompile from branch versioned query statements
BUG-000162360 - Performing an isolation trace with a directional device near the isolated section returns incorrect trace results.
BUG-000161894 - Unable to register DB2 EGDB as a Data Store or validate an existing DB2 Data Sore in ArcGIS Server after installing the "ArcGIS Server 10.9.1 Map and Feature Service Security 2023 Update 1 Patch."
BUG-000161112 - Reduce ArcSOC memory footprint by not cloning class definition
BUG-000160111 - Updates to fields being referenced in a layer definition query for a sync replica lead to two inserts of the same OBJECTID in the delta geodatabase and an error message, "UNIQUE constraint failed: T_6_Updates.OBJECTID" is returned during sync download.
BUG-000159579 - In ArcGIS Pro, the Utility Network connected traces do not honor User Defined Barriers when Filter Function Barriers are configured.
BUG-000158963 - Improve the performance of trace when returning aggregated geometry results.
BUG-000158962 - Improve the trace performance when returning results that contain a large number of associations.
BUG-000158920 - Map service does not include supportsQueryDomains in its root resources.
BUG-000158918 - Print service fails to draws map services off 11.0 or above when the web map is in one of new projections such as equal earth.
BUG-000158628 - A downstream trace runs indefinitely in an infinite loop when specifying a target tier in some scenarios.
BUG-000158186 - Improve branch versioning workflow performance and correctness
BUG-000158185 - Improve enable and validate network topology performance and correctness
BUG-000158184 - Provide the ability to create SubnetLine features to capture summaries even in cases where no aggregated lines are specified for the tier.
BUG-000158039 - There is an information disclosure issue in ArcGIS Server.
BUG-000157992 - Phase propagation loses phase in certain 'loop' situations.
BUG-000157755 - Print services fail when a print request includes both secured and non-secured services from the same server.
BUG-000157709 - In ArcGIS Utility Network, the dirty area of an updated subnetwork which intersects other sub-network geometry invalidates all intersected sub-networks and makes them dirty.
BUG-000156846 - Container Split Policy is not honored for nonspatial junction and edge object content when container line is split
BUG-000156421 - Provide a more informative error message when failures are encountered with a large number of starting points when running a Trace.
BUG-000156281 - Publishing a hosted feature layer from an uploaded file in ArcGIS Enterprise fails with an undefined error after installing ArcGIS Server 10.9.1 Utility Network and Data Management Patch 4 or ArcGIS Server 10.8.1 Utility Network Patch 9.
BUG-000155578 - The Export Subnetwork tool does not export all specified resultFields in the exported JSON file when shape_Length or shape_Area are included.
BUG-000155331 - Attribute propagation for the 'phaseenergized' attribute of an electric line conductor in an electric utility network is occurring in the upstream direction despite terminals set on transformer to only allow for downstream flow.
BUG-000155261 - The Conflict Manager fails to display conflicts when a subtype group layer is published as a referenced feature service.
BUG-000155010 - STArea() value is showing different results based on viewing representation (for example, all records view versus show selected records view).
BUG-000154794 - Subnetwork traces stop unexpectedly by associations not present in the network index
BUG-000154758 - Improve query performance during the update subnetwork operation.
BUG-000154727 - Syncing on SAP HANA with non-versioned archiving data can crash the feature service process on the server
BUG-000154463 - Improve performance of traces containing junction-junction connectivity associations.
BUG-000154441 - Any geoprocessing service fails at the REST endpoint when it references a feature class participating in the trace network.
BUG-000154369 - Avoid rewriting the element associations pages when not necessary.
BUG-000154328 - The Evaluate Rules geoprocessing tool does not consider selected rows from tables.
BUG-000153528 - Receive Error 999999 when executing Arcade expression on Batch Calculation Attribute Rule w/ "Exclude from application evaluation" enabled
BUG-000153133 - Isolation trace is not returning correct result when there is a downstream directional device
BUG-000152897 - Splitting a structure line feature with the policy of Split Content does not associate content features to the new container line created by the split operation.
BUG-000152770 - The Export Subnetwork tool fails when Shape_Length is included in the result fields.
BUG-000152746 - The Error Inspector does not update correctly if two instances of error layers from a validation-enabled feature service with Arcade attribute rules are present in a map.
BUG-000152592 - Phase propagation fails to continue as expected after encountering a device with a modified phase current.
BUG-000152495 - Export subnetwork files must have the correct server prefix to allow the server to delete files.
BUG-000152378 - Remove singleton queries from validate when accessing the eidmappings table.
BUG-000152239 - Heuristic to improve the Validate Consistency performance.
BUG-000152209 - Validate returns the discovered subnetworks in the response payload.
BUG-000152139 - ArcGIS Enterprise Data Store's update password process breaks layers that are referencing a geodatabase.
BUG-000152047 - Optimize Oracle branch version spatial query to use DBMS 'rowid' instead of 'gdb_archive_oid' when joining to the analytic subquery.
BUG-000152042 - The branch versioning reconcile and post require an application lock to ensure only one SOC per session can perform the operations.
BUG-000152041 - Reconciling a version fails with the following error, "Null geometries are not allowed."
BUG-000151865 - /Poor performance when running ValidatingSubnetworkTraceResult during the Update Subnetwork operation.
BUG-000151822 - /Slow performance when viewing associations in Oracle.
BUG-000151804 - The sde_purge_process_information procedure and delete statement can become blocked by uncommitted transactions on sys.objects.
BUG-000151789 - Feature.AssociationStatus is out of sync after creating associations via an attribute rule.
BUG-000151626 - Remove the singleton query from midspan connectivity processing.
BUG-000151624 - Add MAXDOP 1 to all branch versioned queries that do not have a spatial or attribute-provided query filter.
BUG-000151587 - In ArcGIS Server 10.8.1, using the createReplica operation in the REST endpoint creates a corrupt geodatabase when the referenced feature class has an index with 11 or more columns.
BUG-000151544 - The sde_branch_tables_modified primary cluster key must be branch_id, edit_moment, and registration_id.
BUG-000151543 - Remove NOT EXISTS statements and replace them with where 'rn > 1' for branch versioning procedures.
BUG-000151537 - Add the forceseek index hint to the delete statement in the SDE_Branch_modified_def_delete_procedure.
BUG-000151487 - The Validate command does not remove dirty areas for features when error features are created.
BUG-000151443 - The Validate Network Topology tool with a Utility Network Version 3 deletes dirty areas when error features are present.
BUG-000151400 - Creating multipart dirty area results in a SE_SHAPE with CAD properties.
BUG-000151399 - Remove singleton query during the build to cache containment and attachment association records.
BUG-000151397 - Silver dirty area features are not being removed by validate.
BUG-000151335 - The validate process generates invalid errors for line terminals due to clipping.
BUG-000151324 - /Address duplicate vertex errors caused by conflicting XY and Z tolerances.
BUG-000151323 - The validate network topology operation is fetching the entire subnetworks table.
BUG-000151321 - The validate network topology operation on a UN3 release is incorrectly fetching all error features.
BUG-000151315 - Validate is fetching the entire dirty area class.
BUG-000151314 - Enable or validate using the wrong error code for vertices within the spatial reference tolerance, which must be error code 5.
BUG-000151237 - Reconciling a branch version returns an error, "The index passed was not within the valid range".
BUG-000151073 - Random poor performance and response times are encountered when editing, validating or reconciling versions.
BUG-000151073 - Users are encountering random poor performance and response times when editing, validating or reconciling versions.
BUG-000151002 - Updating subnetworks using the NOT IN clause can cause an impact on performance.
BUG-000150887 - Creating an enterprise geodatabase in SAP HANA results in the imv_view_name column in the GDB_Table_registry table only allowing 32 characters.
BUG-000150808 - Archive difference (DIFF) tables should be created as global temporary tables in Microsoft Azure SQL Databases.
BUG-000150652 - Utility Network Version 3 produces duplicate records for the same type of dirty area for the same modified feature.
BUG-000150504 - When editing vertices to relocate an electric junction and change the subnetwork connected to the service line, mark the new subnetwork as dirty while the original subnetwork is never flagged as dirty preventing the Update Subnetwork tool from being performed.
BUG-000149876 - RestoreRow fails when an origin row is restored and participates in two relationship classes.
BUG-000149770 - When publishing map image layers with labels enabled in ArcGIS Pro 2.8.2 to Portal for ArcGIS (10.8.1 or 10.9.1), labels initially appear but completely disappear upon editing.
BUG-000149496 - Improve the validation performance for queries to the EIDMapping table.
BUG-000149297 - Aggregated trace results with a function barrier on the shape length are returning the entire line.
BUG-000149291 - The utility network error is not created when a structure junction is placed coincident to a shared endpoint by Electric Lines with a different asset type.
BUG-000148965 - The validation service operation checks the entire data workspace instead of only validating the layers included in the service.
BUG-000148539 - Reconciling a utility network's named version returns the error message, "The subnetwork controller name already exists in the specified tier. []."
BUG-000148398 - Poor asynchronous validate performance at the full extent in the Default version.
BUG-000148331 - The IsDirty property is not set to 'True' after editing an embedded tier in the utility network. Subsequently, the Subnetwork Name for lower tiers is not updated, even after running Update Subnetwork.
BUG-000148070 - Elements missing geometry in output JSON after running the Export Subnetwork
BUG-000147993 - Overwriting the hosted feature service in Portal 10.9.1 created from a CSV utilizing Military Grid Reference System (MGRS) addresses is unsuccessful and crashes the service.
BUG-000147861 - Creating an association through an attribute rule fails with "unknown error" in Enterprise. Server incorrectly reports that the association already exists.
BUG-000147798 - Update the ImportCredentials function to support printing token-based secure services.
BUG-000147765 - Certification of ODBC 18 for SQL Server connections
BUG-000147713 - Validating topology on specific dirty areas in a customer utility network fails with a generic error.
BUG-000147630 - Multiple executions of ApplyEdits with the same edit payload following a timeout can result in a DBMS deadlock error.
BUG-000147190 - Asynchronous Database cursors can cause performance impacts on SQL Server keyset cursors.
BUG-000147054 - When attempting to mark multiple 'Errors as Exception' within the Error Inspector for a branch versioned geodatabase topology service, marking can only be done one at a time. Selecting multiple errors and hitting the 'Mark as Exception' button in the Fix pane of the Error Inspector results in only one of the selected errors being marked as an exception.
BUG-000146998 - Restoring the row via Conflict Manager does not properly maintain the dirty area.
BUG-000146889 - FGDB fails on import associations when reaching commit threshold
BUG-000146789 - Export Subnetwork fails with the error message "Operation is only allowed by the owner of the version" when Default is 'Protected'
BUG-000146762 - Set-based implementation of UN::UpdateSubnetworkStatusByName()
BUG-000146752 - Relating a branch versioned point to a related table record in a child version does not display in the Version Changes window when the relationship class is attributed.
BUG-000146698 - The Select by Location tool experiences performance degradation when upgrading from ArcGIS Server 10.8.1 Utility Network Patch 4 to ArcGIS Server 10.8.1 Utility Network Patch 5b or ArcGIS Server 10.8.1 Utility Network Patch 6 (note partial fix was provided in Patch 10, needs to be included in list to indicate full resolution.)
BUG-000146698 - The Select by Location tool experiences performance degradation when upgrading from ArcGIS Server 10.8.1 Utility Network Patch 4 to ArcGIS Server 10.8.1 Utility Network Patch 5b or ArcGIS Server 10.8.1 Utility Network Patch 6
BUG-000146650 - The contingent values are not ported over when switching from the default version to a child version using the Contents pane.
BUG-000146572 - Update or Trace subnetworks fail for specific subnetwork with Error 999999, Error: Unexpected Operation
BUG-000146447 - When multiple users are editing the same feature layer with different feature points, the enable editor tracking with archiving does not honor 'last_edited_user' in the record.
BUG-000146391 - The cartographic realignment of a route with a high number of vertices and multiple time slices is taking an excessive amount of time to complete.
BUG-000146342 - The Utility Network service fails to start with the error message, "The dataset name is invalid" returned.
BUG-000145596 - The Antialiasing mode configured in ArcGIS Pro or in the Manager site is not honored in the ArcGIS Server REST endpoint.
BUG-000145428 - Optimization to reconcile by avoiding expensive sublineage queries by removing the 'not in' clause.
BUG-000145357 - Propagation not working correctly for lines connected to the same terminal on a device with multiple terminals
BUG-000145334 - A dirty area returns "Status 9" after validation when the errors are created (expect '8').
BUG-000145322 - Update Subnetwork fails with 999999 "Arithmetic overflow error converting float to data type numeric."
BUG-000145060 - Provide a way to disable post processing in validate (marking subnetwork controllers as dirty)
BUG-000145058 - Map service response does not have updated ETag after a layer's resources are updated, causing the GET requests to receive a cached response unless the browser cache is cleared.
BUG-000144988 - Editing a centerline that is a curve that is not associated with a route throws a 3D error
BUG-000144761 - Update subnetworks needs to densify line segments in order not to store CAD properties on the subnetline feature
BUG-000144700 - The error, 'insufficient permissions', can occur on reconcile if the service was published by a database user which does not have permissions to a Utility Network present in the same database by another database user schema.
BUG-000144666 - Long running Save Edits operation in branch version results in ArcGIS Pro error "Save Edits Failed".
BUG-000144593 - V3 Utility Networks regenerate Association Dirty Areas in incorrect locations
BUG-000144420 - Reconcile fails with collation conflict error when database collation is different than instance collation.
BUG-000144404 - Updates to M-values should not create DA
BUG-000144260 - Slow performance when reconciling a branch version in PostgreSQL using the default work_mem settings.
BUG-000144240 - Export Subnetwork taking a long time on specific utility network
BUG-000143940 - Validate Network Topology (async) does not include Success flag to statusUrl when "Success = true"
BUG-000143892 - Reconcile failed on v3 with (an expected field not found)
BUG-000143529 - Error occurs when running "service area analysis" tool: Error DBMS table not found Invalid object name 'sde.sessions_137833_5'
BUG-000143165 - Validate topology does not clean dirty areas created for errors features.
BUG-000142062 - Reconcile and Post should not be creating dirty areas for changes in the DEFAULT version
BUG-000141879 - Optimize the VersionManagementServer VersionResource for the default versions locking information
BUG-000141813 - AddTerminalConfiguration is sorting valid paths (Build algorithm bug)
BUG-000141793 - Branch version change owner (alter version) can cause cached versions to have incorrect information for new owners.
BUG-000141670 - Common Table Expressions (CTE) query not using the ancestor moment timestamp for branch requests, returning incorrect results.
BUG-000141477 - Do not acquire a shared lock on gdb_items during asynchronous validate topology and update subnetwork
BUG-000141458 - Add index hints to branch versioned queries which delete by gdb_branch_id
BUG-000141457 - Add index hints to the branch versioned statements used by the trim operation
BUG-000141456 - Connection not caching spatial index properties resulting in repetitive queries being executed
BUG-000141455 - Add index hints to branch versioned insert statements to ensure the appropriate access path for obtaining the active row
BUG-000141454 - Add index hints to the update statements executed by reconcile and post operation
BUG-000141365 - Map service export operation takes longer when the service has annotation layers
BUG-000141095 - Pro branch versioning editing workflows can lead to server side crashes when split is called on the feature service
BUG-000140825 - There is a performance decrease when the map services contain annotations in servers with newer versions than ArcGIS Server 10.3.1.
BUG-000140704 - REST - measureToGeometry doesn't return the intermediate route when the from and to routeID have the same routeID in Postmile
BUG-000140539 - STIntersects() queries do not use the spatial index
BUG-000140525 - Implement the Validate optimization, when tracing to dirty subnetworks. When a tier contains no subnetworks do not trace the tier, because nothing could be marked as dirty.
BUG-000140449 - Connections blocked by exclusive table lock on sde_process_information.
BUG-000140443 - Validate of content feature generates updates for all associations of the container feature
BUG-000140314 - Realigning an existing centerline fails with Error: Underlying DBMS error 'Conversion failed when converting from a character string to uniqueidentifier" due to routeID field type being a GUID.
BUG-000140214 - Post holding shared table lock on gdb_itemtypes for the duration of the post operation
BUG-000140107 - Feature services in specific scenario fail to render completely when publishing from PostgreSQL PostGIS and Oracle SDO_Geometry data.
BUG-000140030 - Improve performance for branch query with UUID log file table join.
BUG-000140013 - Dead lock can be encountered when multiple connections hold exclusive locks on the sde_process_information and sde_table_locks tables.
BUG-000139968 - Upgrade can create incorrect conditional index on GDB_Locks table.
BUG-000139833 - Deadlocking may on SDE_branches & SDE_branch_tables_modified tables during simultaneous reconcile and post operations.
BUG-000139379 - Conflict propagation incorrectly occurs in a specific scenario with Attributed Relationships and Branch Versioning.
BUG-000139299 - Editing Performance on Enabled Network Topo
BUG-000138999 - Extend object class cache to support controller datasets within the workspace
BUG-000138365 - Adding multiple associations should update the source/target features to trigger attribute rules (filegdb bug)
BUG-000138212 - Validate Topology fails for dirty areas with Subnetwork Errors, "Edit operation failed: ERROR".
BUG-000137729 - A hosted feature layer shared from ArcGIS Pro using ArcGIS Pro default datum transformation displays a shift in Portal Map Viewer when using Esri Basemaps as a background map.
BUG-000137359 - Reconciling changes in a branch version causes ArcGIS Pro to stop responding.
BUG-000137346 - Crash occurs when reconcile is executed while the intermediate table is not registered as versioned.
BUG-000137303 - Review error reporting via JSONResponse when an HR is returned in the VersionManagementServer
BUG-000137260 - Optimize reconcile when the majority of features have been edited
BUG-000137139 - Optimize UpdateAssociationInfo function by splitting the query to discover from/toglobalid associations
BUG-000136979 - Validate Network Topology incorrectly allocating large amounts of memory impacting server soc mem usage
BUG-000136930 - In a branch versioned service, sourcing from a PostgreSQL database, any interruption to the connection results into underlying DBMS error until service is restarted.
BUG-000136892 - When a -1 is returned to ArcGIS Pro the conflict resolution dialog is unable to properly present the conflicts
BUG-000136889 - After upgrading Enterprise Geodatabase 10.7.1 to 10.8.1 and running the query to get Next_RowID, the following error message is returned: Msg 8144, Level 16, State 2, Procedure DBO.i13_get_ids, Line 0 [Batch Start Line 0] Procedure or function i13_get_ids has too many arguments specified.
BUG-000136296 - Long running reconciles may block users from editing Default or reconciling other versions with Branch Versioning.
BUG-000136284 - Editing data which are registered as multibranch causes lock escalation and blocking scenarios in the geodatabases in the SQL Server.
BUG-000136107 - The Update Subnetwork tool fails and returns the error message, "ERROR 001400: The server took too long to answer. The client has timed out. (status code 28). Failed to execute (UpdateSubnetwork)."
BUG-000135328 - Reconcile fails on a branch version and returns the error message, "A row with this OID already exists."
BUG-000135117 - Updating the subnetwork on a geographic coordinate system (GCS) spatial reference utility network fails the second time for short lines.
BUG-000135099 - Branch versioned data owned by DBO or SDE allows standard portal users access to
BUG-000134954 - Reconciling multiple versions in the utility network using the Reconcile Versions tool crashes the ArcSOC.exe instance.
BUG-000134950 - Crash occurs when reconcile is executed while a related destination table was not registered as versioned
BUG-000134496 - Using the 'Reconcile Versions' tool and leaving the 'Abort if conflicts detected' parameter unchecked, the session is still aborting the reconcile.
BUG-000133978 - Unable to execute the 'Export Report to PDF' ArcPy function outside of the ArcGIS Pro environment.
BUG-000133698 - Enabling the topology with the 'Only generate errors' option does not clean the dirty areas of the error.
BUG-000133185 - The 'Validate Network Topology' tool fails, and returns the following error message, "Edit operation failed. ERROR:"
BUG-000132887 - The electric subnet lines and electric lines do not overlap when the UN is in a GCS of 'GDA2020'.
BUG-000132610 - Updating/overwriting a csv fails if the first 150 records are removed.
BUG-000130888 - The Register with Geodatabase tool fails when registering an empty feature class
BUG-000124574 - Certain Living Atlas Premium content layers do not successfully display in the legend of a map printed from Web AppBuilder for ArcGIS.
BUG-000115504 - The ArcGIS Pro Append tool is very slow if the target feature class participates in a relationship class with messaging enabled.

To avoid conflicts, the 10.9.1 version also addresses:

BUG-000165688 - Enabling topology for UN data coming from the SAP HANA database causes ArcGIS Pro to crash.
BUG-000165684 - Check for IDatasetImpl in FeatureServer.
BUG-000165151 - Feature services accessing SAP HANA datastores allow multiple applyEdit operation calls on the same version in parallel.
BUG-000164368 - Remove the binding used for pagination queries offset and next values.
BUG-000164367 - Reduce database resources by eliminating connection pooling and leveraging keyset cursors.
BUG-000164231 - Low performance with utility network maps in all JavaScript 4.x applications.
BUG-000162991 - Crash in map service export operation with clipping parameter.
BUG-000162973 - Remove the option recompile from branch versioned query statements
BUG-000162973 - Remove the option recompile from branch versioned query statements.
BUG-000162360 - Performing an isolation trace with a directional device near the isolated section returns incorrect trace results.
BUG-000162081 - Change the Upgrade Enterprise Geodatabase logic to update the st_within() ST_Geometry function regardless of PostgreSQL version.
BUG-000161894 - Unable to register DB2 EGDB as a Data Store or validate an existing DB2 Data Sore in ArcGIS Server after installing the "ArcGIS Server 10.9.1 Map and Feature Service Security 2023 Update 1 Patch."
BUG-000161813 - Honor directional devices when calculating flow direction in loops.
BUG-000161507 - The identify requests for map services published from mosaic datasets via ArcGIS Pro fail with an error 500, causing dump files to accumulate and fill up disk space.
BUG-000161112 - Reduce ArcSOC memory footprint by not cloning class definition
BUG-000161000 - Incorrect Line Number reported on invalid arcade
BUG-000160880 - Graphics not rendered in SOAP request exportMapImage 10.9.1 when a map service is published from ArcGIS Pro.
BUG-000160834 - The service based LRS tool, Reverse Routes, introduces non-zero and negative non-zero values instead of clean zeros.
BUG-000160600 - Multidimensional Imagery Services not rendered correctly in Map Viewer, when published with a Vector Field Symbol Raster Function.
BUG-000160111 - Updates to fields being referenced in a layer definition query for a sync replica lead to two inserts of the same OBJECTID in the delta geodatabase and an error message, "UNIQUE constraint failed: T_6_Updates.OBJECTID" is returned during sync download.
BUG-000160068 - Evaluate batch calculation should reset validationstatus requireValidation
BUG-000159579 - In ArcGIS Pro, the Utility Network connected traces do not honor User Defined Barriers when Filter Function Barriers are configured.
BUG-000159472 - Constrained XYZ Points are processed as XY Free, resulting in unexpected movement during adjustments.
BUG-000159371 - Custom print service with the following property in the legend "Only show features visible in the map extent" filters feature services, but does not filter image services.
BUG-000159117 - The Export Subnetwork tool does not include domain descriptions in the JavaScript object notation (JSON) for text or string fields included in the Result Fields.
BUG-000158963 - Improve the performance of trace when returning aggregated geometry results.
BUG-000158962 - Improve the trace performance when returning results that contain a large number of associations.
BUG-000158920 - Map service does not include supportsQueryDomains in its root resources.
BUG-000158918 - Print service fails to draws map services off 11.0 or above when the web map is in one of new projections such as equal earth.
BUG-000158886 - In UN Branch Versioning, the branch versions appear under the user's name. The versions are neither created by the user nor assigned to them knowingly by any other user, and appear as 'private' rather than 'public'.
BUG-000158628 - A downstream trace runs indefinitely in an infinite loop when specifying a target tier in some scenarios.
BUG-000158186 - Improve branch versioning workflow performance and correctness
BUG-000158185 - Improve enable and validate network topology performance and correctness
BUG-000158184 - Provide the ability to create SubnetLine features to capture summaries even in cases where no aggregated lines are specified for the tier.
BUG-000158039 - There is an information disclosure issue in ArcGIS Server.
BUG-000157992 - Phase propagation loses phase in certain 'loop' situations.
BUG-000157838 - When using the Validate Network Topology tool, an edit operation failed and returns a General Function Failure error.
BUG-000157809 - Validating a topology fails and the following error message, "Edit operation failed. ERROR: General function failure [Topology entry (edge eid: xxxx) not found for feature" is returned.
BUG-000157755 - Print services fail when a print request includes both secured and non-secured services from the same server.
BUG-000157709 - In ArcGIS Utility Network, the dirty area of an updated subnetwork which intersects other sub-network geometry invalidates all intersected sub-networks and makes them dirty.
BUG-000157672 - When working in a utility network, an asynchronous validation at the full extent timeouts after two hours.
BUG-000157087 - Saving a versioned edit session should update all previously saved edits to the new version moment.
BUG-000156846 - Container Split Policy is not honored for nonspatial junction and edge object content when container line is split
BUG-000156763 - Post must obtain the current list of modified tables for a version prior to the posting operation.
BUG-000156421 - Provide a more informative error message when failures are encountered with a large number of starting points when running a Trace.
BUG-000156349 - The reconcile process may timeout while an operation is being completed on Default.
BUG-000156281 - Publishing a hosted feature layer from an uploaded file in ArcGIS Enterprise fails with an undefined error after installing ArcGIS Server 10.9.1 Utility Network and Data Management Patch 4 or ArcGIS Server 10.8.1 Utility Network Patch 9.
BUG-000155871 - When performing a realignment with abandonment with 'Recalibrate route downstream' unchecked and point event's 'Calibrate Route' event behavior rule set to 'Move', the upstream event record gets the Location Error value of 'Route Location Not Found'.
BUG-000155836 - Support LRS operations for GCS data with vertices that are too sparsely spaced.
BUG-000155737 - The Realign Route tool fails and returns the error message: "error processing edits on Server" for exceptionally long routes.
BUG-000155578 - Export Subnetwork does not export all specified resultFields in the export JSON when shape_Length or shape_Area are included
BUG-000155422 - Running the Generate Routes tool using the Postmile network changes the Odometer values in a linear referencing system (LRS) Dataset (published and branch versioned).
BUG-000155331 - Attribute propagation for the 'phaseenergized' attribute of an electric line conductor in an electric utility network is occurring in the upstream direction despite terminals set on transformer to only allow for downstream flow.
BUG-000155261 - The Conflict Manager fails to display conflicts when a subtype group layer is published as a referenced feature service.
BUG-000154999 - Differences and Reconcile may return incorrect results for classes registered after the version was created or last reconciled.
BUG-000154803 - Adding new or moving existing calibration points associated with a postmile network using the core editing tools in ArcGIS Pro returns an error message.
BUG-000154801 - In postmile networks, a request in the ArcGIS REST API Measure To Geometry operation for the measures at the end of a route and the beginning of the next route, which span a gap, does not return the correct geometry.
BUG-000154794 - Subnetwork traces stop unexpectedly by associations not present in the network index
BUG-000154794 - Reconcile is not setting the association status bit too dirty for associations which were validated in the version prior to reconcile.
BUG-000154758 - Improve query performance during the update subnetwork operation.
BUG-000154749 - In the ArcGIS Pro Location Referencing toolbox, the Update Measure From LRS tool fails to calculate measures for points on a coincident route.
BUG-000154727 - Syncing on SAP HANA with non-versioned archiving data can crash the feature service process on the server
BUG-000154463 - Improve performance of traces containing junction-junction connectivity associations.
BUG-000154441 - Any geoprocessing service fails at the REST endpoint when it references a feature class participating in the trace network.
BUG-000154369 - Avoid rewriting the element associations pages when not necessary.
BUG-000154328 - The Evaluate Rules geoprocessing tool does not consider selected rows from tables.
BUG-000153528 - Receive Error 999999 when executing Arcade expression on Batch Calculation Attribute Rule w/ "Exclude from application evaluation" enabled
BUG-000153133 - Isolation trace is not returning correct result when there is a downstream directional device
BUG-000152897 - Splitting a structure line feature with the policy of Split Content does not associate content features to the new container line created by the split operation.
BUG-000152770 - The Export Subnetwork tool fails when Shape_Length is included in the result fields.
BUG-000152746 - The Error Inspector does not update correctly if two instances of error layers from a validation-enabled feature service with Arcade attribute rules are present in a map.
BUG-000152592 - Phase propagation fails to continue as expected after encountering a device with a modified phase current.
BUG-000152495 - Export subnetwork files must have the correct server prefix to allow the server to delete files.
BUG-000152378 - Remove singleton queries from validate when accessing the eidmappings table.
BUG-000152378 - Remove singleton queries from validate when accessing the EIDMapping table
BUG-000152242 - Revisit the fix to multiple starting points with directional devices to improve performance.)
BUG-000152239 - Heuristic to improve the Validate Consistency performance.
BUG-000152209 - Validate returns the discovered subnetworks in the response payload.
BUG-000152129 - Applying raster function templates to mosaic datasets crashes ArcGIS Pro if the template is created using Vector Field symbols.
BUG-000152124 - Slow query when expanding associated data in Attributes pane
BUG-000152047 - Optimize Oracle branch version spatial query to use DBMS 'rowid' instead of 'gdb_archive_oid' when joining to the analytic subquery.
BUG-000152047 - Optimize Oracle branch version spatial query to use DBMS Rowid instead of GDB_ARCHIVE_OID when joining to the analytic subquery
BUG-000152042 - The branch versioning reconcile and post require an application lock to ensure only one SOC per session can perform the operations.
BUG-000152041 - Reconciling a version fails with the following error, "Null geometries are not allowed."
BUG-000151865 - Poor performance when running ValidatingSubnetworkTraceResult during the Update Subnetwork operation.
BUG-000151865 - Improve time spent ValidatingSubnetworkTraceResult during Update Subnetwork operation.
BUG-000151822 - Slow performance when viewing associations in Oracle.
BUG-000151804 - The sde_purge_process_information procedure and delete statement can become blocked by uncommitted transactions on sys.objects.
BUG-000151792 - The Generate Routes tool creates incorrect results.
BUG-000151789 - Feature.AssociationStatus is out of sync after creating associations via an attribute rule.
BUG-000151626 - Remove the singleton query from midspan connectivity processing.
BUG-000151626 - Remove singleton query from midspan connectivity processing (validate)
BUG-000151624 - Add MAXDOP 1 to all branch versioned queries that do not have a spatial or attribute-provided query filter.
BUG-000151544 - The sde_branch_tables_modified primary cluster key must be branch_id, edit_moment, and registration_id.
BUG-000151543 - Remove NOT EXISTS statements and replace them with where 'rn > 1' for branch versioning procedures.
BUG-000151537 - Add the forceseek index hint to the delete statement in the SDE_Branch_modified_def_delete_procedure.
BUG-000151443 - The Validate Network Topology tool with a Utility Network Version 3 deletes dirty areas when error features are present.
BUG-000151400 - Creating multipart dirty area results in a SE_SHAPE with CAD properties.
BUG-000151399 - Remove singleton query during the build to cache containment and attachment association records.
BUG-000151397 - Silver dirty area features are not being removed by validate.
BUG-000151335 - The validate process generates invalid errors for line terminals due to clipping.
BUG-000151324 - Address duplicate vertex errors caused by conflicting XY and Z tolerances.
BUG-000151323 - The validate network topology operation is fetching the entire subnetworks table.
BUG-000151321 - The validate network topology operation on a UN3 release is incorrectly fetching all error features.
BUG-000151315 - Validate is fetching the entire dirty area class.
BUG-000151314 - Enable or validate using the wrong error code for vertices within the spatial reference tolerance, which must be error code 5.
BUG-000151237 - Reconcile fails on v3 [Invalid column name 'STATUS'. UN_6_Association]
BUG-000151193 - The GetUser(portal) function fails in ArcGIS Enterprise 10.9.1.
BUG-000151073 - Random poor performance and response times are encountered when editing, validating or reconciling versions.
BUG-000151073 - branch version DML statements which use the gdb_ct1 or ct2 index via a scan will be blocked by long running transactions
BUG-000150887 - Creating an enterprise geodatabase in SAP HANA results in the imv_view_name column in the GDB_Table_registry table only allowing 32 characters.
BUG-000150864 - Realign Route fails in an APR-UN environment if the beginning/end of the centerline(s) used for the realignment don't touch the route.
BUG-000150808 - Archive difference (DIFF) tables should be created as global temporary tables in Microsoft Azure SQL Databases.
BUG-000150652 - Utility Network Version 3 produces duplicate records for the same type of dirty area for the same modified feature.
BUG-000150504 - When editing vertices to relocate an electric junction and change the subnetwork connected to the service line, mark the new subnetwork as dirty while the original subnetwork is never flagged as dirty preventing the Update Subnetwork tool from being performed.
BUG-000150026 - Importing Associations populates values for the From/ToTerminalID fields in the Associations table when it is not applicable.
BUG-000149966 - Realign Route with abandonment fails when there are 200+ centerlines involved in the edit due to Pro timeout.
BUG-000149876 - RestoreRow fails when an origin row is restored and participates in two relationship classes.
BUG-000149811 - When adding a feature service containing query layers in ArcGIS Pro, a getEstimates call is returned which results in the error message, "code":500,"message":"Error performing estimates operation","details" returned.
BUG-000149770 - When publishing map image layers with labels enabled in ArcGIS Pro 2.8.2 to Portal for ArcGIS (10.8.1 or 10.9.1), labels initially appear but completely disappear upon editing.
BUG-000149552 - A map service query layer fails to query statistics if the data is not registered with the geodatabase and sdo geometry is the storage type.
BUG-000149497 - When importing associations, logically deleted records must be filtered during duplication check with Utility Network 4.
BUG-000149496 - Improve the validation performance for queries to the EIDMapping table.
BUG-000149393 - The Validate Network Topology tool fails and returns the error message, "Error building network: Topology Engine::query from_to_ junctions(): Topology entry not found".
BUG-000149297 - Aggregated trace results with a function barrier on the shape length are returning the entire line.
BUG-000149291 - The utility network error is not created when a structure junction is placed coincident to a shared endpoint by Electric Lines with a different asset type.
BUG-000149046 - The Ignore Barriers At Starting Point parameter is not honored for Filter Barriers placed on line features.
BUG-000148965 - The validation service operation checks the entire data workspace instead of only validating the layers included in the service.
BUG-000148965 - Evaluate is reading the entire workspace
BUG-000148896 - The Error Inspector does not update correctly if two instances of error layers from a validation-enabled feature service are present in a map.
BUG-000148539 - Reconciling a utility network's named version returns the error message, "The subnetwork controller name already exists in the specified tier. []."
BUG-000148467 - A map service created with SDO_geometry data type, referencing a non-enterprise geodatabase, fails to query when a polygon search geometry and outStatistics parameters are used.
BUG-000148398 - Poor asynchronous validate performance at the full extent in the Default version.
BUG-000148331 - IsDirty property is not set to 'True' after editing an embedded tier in the utility network. Subsequently, Subnetwork Name for lower tiers is not updated, even after running Update.
BUG-000148077 - Adjacent subnetworks do not show up in the results of Downstream Utility Network Trace.
BUG-000148070 - Missing geometry for some features after running the Export Subnetwork tool with the Include Geometry parameter enabled.
BUG-000147861 - Creating an association through an attribute rule fails with the error message, "unknown error" in an SQL Server Enterprise environment. The server incorrectly reports that the association already exists.
BUG-000147798 - Update the ImportCredentials function to support printing token-based secure services.
BUG-000147765 - Certification of Microsoft ODBC Driver 18 for SQL Server connections.
BUG-000147713 - Validating topology on specific dirty areas in a customer utility network fails with a generic error.
BUG-000147630 - Using the Modify Associations pane in a versioned data results in a long delay, and fails with a deadlock error.
BUG-000147611 - Unable to display labels for ArcGIS Server map services if the Clipping and Image Spatial Reference parameters are filled.
BUG-000147316 - Arcpy based print service fails to add a table from a map service with aMap.addDataFromPath() function.
BUG-000147190 - Asynchronous Database cursors can cause performance impacts on SQL Server keyset cursors.
BUG-000147165 - Date/time values do NOT get converted to UTC for XY Event layer when the source is a query layer.
BUG-000146998 - Restoring a row via Conflict Manager may create a scenario where dirty areas become out of sync.
BUG-000146928 - The Validate Network Topology tool fails on specific dirty area extent and returns the error message, "Error 999999 (Topology entry (from junction eid) not found.)".
BUG-000146789 - The Export Subnetwork tool fails and returns the error message, "Operation is only allowed by the owner of the version" unless the user is the owner of the version or the version access is public.
BUG-000146762 - Reduce network traffic between the database and server when running the Update Subnetwork tool.
BUG-000146752 - Relating a branch versioned point to a related table record in a child version does not display in the Version Changes window when the relationship class is attributed.
BUG-000146698 - The Select by Location tool experiences performance degradation when upgrading from ArcGIS Server 10.8.1 Utility Network Patch 4 to ArcGIS Server 10.8.1 Utility Network Patch 5b or ArcGIS Server 10.8.1 Utility Network Patch 6
BUG-000146650 - The contingent values are not ported over when switching from the default version to a child version using the Contents pane.
BUG-000146391 - The cartographic realignment of a route with a high number of vertices and multiple time slices is taking an excessive amount of time to complete.
BUG-000146342 - The Utility Network service fails to start with the error message, "The dataset name is invalid" returned.
BUG-000146187 - When a feature class in a geodatabase has fields with defined default values, and the user publishes a feature layer, the resulting feature templates in the feature service do not have any default values.
BUG-000145832 - An RFT saved from the symbology pane for a multidimensional raster does not display when used as a symbology template for the same layer.
BUG-000145428 - Optimization to reconcile by avoiding expensive sublineage queries by removing the 'not in' clause.
BUG-000145428 - Branch versioning reconcile trim delete statement optimization to avoid full fetching all rowids in the sublineage (removing NOT IN subquery)
BUG-000145357 - Propagation not working correctly for lines connected to the same terminal on a device with multiple terminals
BUG-000145334 - A dirty area returns "Status 9" after validation when the errors are created (expect '8').
BUG-000145322 - Update Subnetwork fails with 999999 "Arithmetic overflow error converting float to data type numeric."
BUG-000145060 - Provide a way to disable post processing in validate (marking subnetwork controllers as dirty)
BUG-000144988 - Editing a centerline that is a curve that is not associated with a route throws a 3D error
BUG-000144877 - System is failing to write the burn-in propagated values to phasesenergized field
BUG-000144700 - The error, 'insufficient permissions', can occur on reconcile if the service was published by a database user which does not have permissions to a Utility Network present in the same database by another database user schema.
BUG-000144689 - When an export map request including a definition expression on an invalid map layer is performed on a dynamic map service, the service returns incorrect query results until it is restarted.
BUG-000144666 - Long running Save Edits operation in branch version results in ArcGIS Pro error "Save Edits Failed".
BUG-000144593 - V3 Utility Networks regenerate Association Dirty Areas in incorrect locations
BUG-000144420 - Reconcile fails with collation conflict error when database collation is different than instance collation.
BUG-000144260 - Slow performance when reconciling a branch version in PostgreSQL using the default work_mem settings.
BUG-000144240 - Export Subnetwork taking a long time on specific utility network
BUG-000143940 - Validate Network Topology (async) does not include Success flag to statusUrl when "Success = true"
BUG-000143892 - Reconcile failed on v3 with (an expected field not found)
BUG-000143529 - Error occurs when running "service area analysis" tool: Error DBMS table not found Invalid object name 'sde.sessions_137833_5'
BUG-000140779 - When reconciling edits on a feature service with a set time zone, date type fields display incorrectly in the Conflict Manager.
BUG-000136842 - Using the Identify tool in the ArcGIS Server Rest API returns one result if a layer is configured as a raster layer.
BUG-000135875 - Unable to apply a layer definition to Mosaic Dataset map service layers when published from ArcGIS Pro.
BUG-000135099 - Branch versioned data owned by DBO or SDE allows standard portal users access to view and manage all versions via the service.
BUG-000124574 - Certain Living Atlas Premium content layers do not successfully display in the legend of a map printed from Web AppBuilder for ArcGIS.

To avoid conflicts, the 10.8.1 version also addresses:

BUG-000163235 - Slow performance when running ArcGIS Utility Network 'Upstream trace'.
BUG-000162973 - Remove the option recompile from branch versioned query statements
BUG-000162360 - Performing an isolation trace with a directional device near the isolated section returns incorrect trace results.
BUG-000161894 - Unable to register DB2 EGDB as a Data Store or validate an existing DB2 Data Sore in ArcGIS Server after installing the "ArcGIS Server 10.9.1 Map and Feature Service Security 2023 Update 1 Patch."
BUG-000161112 - Reduce ArcSOC memory footprint by not cloning class definition
BUG-000160111 - Updates to fields being referenced in a layer definition query for a sync replica lead to two inserts of the same OBJECTID in the delta geodatabase and an error message, "UNIQUE constraint failed: T_6_Updates.OBJECTID" is returned during sync download.
BUG-000159579 - In ArcGIS Pro, the Utility Network connected traces do not honor User Defined Barriers when Filter Function Barriers are configured.
BUG-000158963 - Improve the performance of trace when returning aggregated geometry results.
BUG-000158962 - Improve the trace performance when returning results that contain a large number of associations.
BUG-000158920 - Map service does not include supportsQueryDomains in its root resources.
BUG-000158918 - Print service fails to draws map services off 11.0 or above when the web map is in one of new projections such as equal earth.
BUG-000158628 - A downstream trace runs indefinitely in an infinite loop when specifying a target tier in some scenarios.
BUG-000158186 - Improve branch versioning workflow performance and correctness
BUG-000158185 - Improve enable and validate network topology performance and correctness
BUG-000158184 - Provide the ability to create SubnetLine features to capture summaries even in cases where no aggregated lines are specified for the tier.
BUG-000158039 - There is an information disclosure issue in ArcGIS Server.
BUG-000157992 - Phase propagation loses phase in certain 'loop' situations.
BUG-000157755 - Print services fail when a print request includes both secured and non-secured services from the same server.
BUG-000157709 - In ArcGIS Utility Network, the dirty area of an updated subnetwork which intersects other sub-network geometry invalidates all intersected sub-networks and makes them dirty.
BUG-000156846 - Container Split Policy is not honored for nonspatial junction and edge object content when container line is split
BUG-000156421 - Provide a more informative error message when failures are encountered with a large number of starting points when running a Trace.
BUG-000156281 - Publishing a hosted feature layer from an uploaded file in ArcGIS Enterprise fails with an undefined error after installing ArcGIS Server 10.9.1 Utility Network and Data Management Patch 4 or ArcGIS Server 10.8.1 Utility Network Patch 9.
BUG-000155578 - The Export Subnetwork tool does not export all specified resultFields in the exported JSON file when shape_Length or shape_Area are included.
BUG-000155331 - Attribute propagation for the 'phaseenergized' attribute of an electric line conductor in an electric utility network is occurring in the upstream direction despite terminals set on transformer to only allow for downstream flow.
BUG-000155261 - The Conflict Manager fails to display conflicts when a subtype group layer is published as a referenced feature service.
BUG-000154794 - Subnetwork traces stop unexpectedly by associations not present in the network index
BUG-000154758 - Improve query performance during the update subnetwork operation.
BUG-000154727 - Syncing on SAP HANA with non-versioned archiving data can crash the feature service process on the server
BUG-000154463 - Improve performance of traces containing junction-junction connectivity associations.
BUG-000154441 - Any geoprocessing service fails at the REST endpoint when it references a feature class participating in the trace network.
BUG-000154369 - Avoid rewriting the element associations pages when not necessary.
BUG-000154328 - The Evaluate Rules geoprocessing tool does not consider selected rows from tables.
BUG-000153528 - Receive Error 999999 when executing Arcade expression on Batch Calculation Attribute Rule w/ "Exclude from application evaluation" enabled
BUG-000153133 - Isolation trace is not returning correct result when there is a downstream directional device
BUG-000152897 - Splitting a structure line feature with the policy of Split Content does not associate content features to the new container line created by the split operation.
BUG-000152770 - The Export Subnetwork tool fails when Shape_Length is included in the result fields.
BUG-000152746 - The Error Inspector does not update correctly if two instances of error layers from a validation-enabled feature service with Arcade attribute rules are present in a map.
BUG-000152592 - Phase propagation fails to continue as expected after encountering a device with a modified phase current.
BUG-000152495 - Export subnetwork files must have the correct server prefix to allow the server to delete files.
BUG-000152378 - Remove singleton queries from validate when accessing the eidmappings table.
BUG-000152239 - Heuristic to improve the Validate Consistency performance.
BUG-000152209 - Validate returns the discovered subnetworks in the response payload.
BUG-000152047 - Optimize Oracle branch version spatial query to use DBMS 'rowid' instead of 'gdb_archive_oid' when joining to the analytic subquery.
BUG-000152042 - The branch versioning reconcile and post require an application lock to ensure only one SOC per session can perform the operations.
BUG-000152041 - Reconciling a version fails with the following error, "Null geometries are not allowed."
BUG-000151865 - /Poor performance when running ValidatingSubnetworkTraceResult during the Update Subnetwork operation.
BUG-000151822 - /Slow performance when viewing associations in Oracle.
BUG-000151804 - The sde_purge_process_information procedure and delete statement can become blocked by uncommitted transactions on sys.objects.
BUG-000151789 - Feature.AssociationStatus is out of sync after creating associations via an attribute rule.
BUG-000151626 - Remove the singleton query from midspan connectivity processing.
BUG-000151624 - Add MAXDOP 1 to all branch versioned queries that do not have a spatial or attribute-provided query filter.
BUG-000151587 - In ArcGIS Server 10.8.1, using the createReplica operation in the REST endpoint creates a corrupt geodatabase when the referenced feature class has an index with 11 or more columns.
BUG-000151544 - The sde_branch_tables_modified primary cluster key must be branch_id, edit_moment, and registration_id.
BUG-000151543 - Remove NOT EXISTS statements and replace them with where 'rn > 1' for branch versioning procedures.
BUG-000151537 - Add the forceseek index hint to the delete statement in the SDE_Branch_modified_def_delete_procedure.
BUG-000151487 - The Validate command does not remove dirty areas for features when error features are created.
BUG-000151443 - The Validate Network Topology tool with a Utility Network Version 3 deletes dirty areas when error features are present.
BUG-000151400 - Creating multipart dirty area results in a SE_SHAPE with CAD properties.
BUG-000151399 - Remove singleton query during the build to cache containment and attachment association records.
BUG-000151397 - Silver dirty area features are not being removed by validate.
BUG-000151335 - The validate process generates invalid errors for line terminals due to clipping.
BUG-000151324 - /Address duplicate vertex errors caused by conflicting XY and Z tolerances.
BUG-000151323 - The validate network topology operation is fetching the entire subnetworks table.
BUG-000151321 - The validate network topology operation on a UN3 release is incorrectly fetching all error features.
BUG-000151315 - Validate is fetching the entire dirty area class.
BUG-000151314 - Enable or validate using the wrong error code for vertices within the spatial reference tolerance, which must be error code 5.
BUG-000151237 - Reconciling a branch version returns an error, "The index passed was not within the valid range".
BUG-000151073 - Random poor performance and response times are encountered when editing, validating or reconciling versions.
BUG-000151073 - Users are encountering random poor performance and response times when editing, validating or reconciling versions.
BUG-000151002 - Updating subnetworks using the NOT IN clause can cause an impact on performance.
BUG-000150887 - Creating an enterprise geodatabase in SAP HANA results in the imv_view_name column in the GDB_Table_registry table only allowing 32 characters.
BUG-000150808 - Archive difference (DIFF) tables should be created as global temporary tables in Microsoft Azure SQL Databases.
BUG-000150652 - Utility Network Version 3 produces duplicate records for the same type of dirty area for the same modified feature.
BUG-000150504 - When editing vertices to relocate an electric junction and change the subnetwork connected to the service line, mark the new subnetwork as dirty while the original subnetwork is never flagged as dirty preventing the Update Subnetwork tool from being performed.
BUG-000149876 - RestoreRow fails when an origin row is restored and participates in two relationship classes.
BUG-000149770 - When publishing map image layers with labels enabled in ArcGIS Pro 2.8.2 to Portal for ArcGIS (10.8.1 or 10.9.1), labels initially appear but completely disappear upon editing.
BUG-000149496 - Improve the validation performance for queries to the EIDMapping table.
BUG-000149297 - Aggregated trace results with a function barrier on the shape length are returning the entire line.
BUG-000149291 - The utility network error is not created when a structure junction is placed coincident to a shared endpoint by Electric Lines with a different asset type.
BUG-000148965 - The validation service operation checks the entire data workspace instead of only validating the layers included in the service.
BUG-000148539 - Reconciling a utility network's named version returns the error message, "The subnetwork controller name already exists in the specified tier. []."
BUG-000148398 - Poor asynchronous validate performance at the full extent in the Default version.
BUG-000148331 - The IsDirty property is not set to 'True' after editing an embedded tier in the utility network. Subsequently, the Subnetwork Name for lower tiers is not updated, even after running Update Subnetwork.
BUG-000148070 - Elements missing geometry in output JSON after running the Export Subnetwork
BUG-000147993 - Overwriting the hosted feature service in Portal 10.9.1 created from a CSV utilizing Military Grid Reference System (MGRS) addresses is unsuccessful and crashes the service.
BUG-000147861 - Creating an association through an attribute rule fails with "unknown error" in Enterprise. Server incorrectly reports that the association already exists.
BUG-000147798 - Update the ImportCredentials function to support printing token-based secure services.
BUG-000147765 - Certification of ODBC 18 for SQL Server connections
BUG-000147713 - Validating topology on specific dirty areas in a customer utility network fails with a generic error.
BUG-000147630 - Multiple executions of ApplyEdits with the same edit payload following a timeout can result in a DBMS deadlock error.
BUG-000147190 - Asynchronous Database cursors can cause performance impacts on SQL Server keyset cursors.
BUG-000147054 - When attempting to mark multiple 'Errors as Exception' within the Error Inspector for a branch versioned geodatabase topology service, marking can only be done one at a time. Selecting multiple errors and hitting the 'Mark as Exception' button in the Fix pane of the Error Inspector results in only one of the selected errors being marked as an exception.
BUG-000146998 - Restoring the row via Conflict Manager does not properly maintain the dirty area.
BUG-000146889 - FGDB fails on import associations when reaching commit threshold
BUG-000146789 - Export Subnetwork fails with the error message "Operation is only allowed by the owner of the version" when Default is 'Protected'
BUG-000146762 - Set-based implementation of UN::UpdateSubnetworkStatusByName()
BUG-000146752 - Relating a branch versioned point to a related table record in a child version does not display in the Version Changes window when the relationship class is attributed.
BUG-000146698 - The Select by Location tool experiences performance degradation when upgrading from ArcGIS Server 10.8.1 Utility Network Patch 4 to ArcGIS Server 10.8.1 Utility Network Patch 5b or ArcGIS Server 10.8.1 Utility Network Patch 6 (note partial fix was provided in Patch 10, needs to be included in list to indicate full resolution.)
BUG-000146698 - The Select by Location tool experiences performance degradation when upgrading from ArcGIS Server 10.8.1 Utility Network Patch 4 to ArcGIS Server 10.8.1 Utility Network Patch 5b or ArcGIS Server 10.8.1 Utility Network Patch 6
BUG-000146650 - The contingent values are not ported over when switching from the default version to a child version using the Contents pane.
BUG-000146572 - Update or Trace subnetworks fail for specific subnetwork with Error 999999, Error: Unexpected Operation
BUG-000146447 - When multiple users are editing the same feature layer with different feature points, the enable editor tracking with archiving does not honor 'last_edited_user' in the record.
BUG-000146391 - The cartographic realignment of a route with a high number of vertices and multiple time slices is taking an excessive amount of time to complete.
BUG-000146342 - The Utility Network service fails to start with the error message, "The dataset name is invalid" returned.
BUG-000145596 - The Antialiasing mode configured in ArcGIS Pro or in the Manager site is not honored in the ArcGIS Server REST endpoint.
BUG-000145428 - Optimization to reconcile by avoiding expensive sublineage queries by removing the 'not in' clause.
BUG-000145357 - Propagation not working correctly for lines connected to the same terminal on a device with multiple terminals
BUG-000145334 - A dirty area returns "Status 9" after validation when the errors are created (expect '8').
BUG-000145322 - Update Subnetwork fails with 999999 "Arithmetic overflow error converting float to data type numeric."
BUG-000145060 - Provide a way to disable post processing in validate (marking subnetwork controllers as dirty)
BUG-000145058 - Map service response does not have updated ETag after a layer's resources are updated, causing the GET requests to receive a cached response unless the browser cache is cleared.
BUG-000144988 - Editing a centerline that is a curve that is not associated with a route throws a 3D error
BUG-000144761 - Update subnetworks needs to densify line segments in order not to store CAD properties on the subnetline feature
BUG-000144700 - The error, 'insufficient permissions', can occur on reconcile if the service was published by a database user which does not have permissions to a Utility Network present in the same database by another database user schema.
BUG-000144666 - Long running Save Edits operation in branch version results in ArcGIS Pro error "Save Edits Failed".
BUG-000144593 - V3 Utility Networks regenerate Association Dirty Areas in incorrect locations
BUG-000144420 - Reconcile fails with collation conflict error when database collation is different than instance collation.
BUG-000144404 - Updates to M-values should not create DA
BUG-000144260 - Slow performance when reconciling a branch version in PostgreSQL using the default work_mem settings.
BUG-000144240 - Export Subnetwork taking a long time on specific utility network
BUG-000143940 - Validate Network Topology (async) does not include Success flag to statusUrl when "Success = true"
BUG-000143892 - Reconcile failed on v3 with (an expected field not found)
BUG-000143529 - Error occurs when running "service area analysis" tool: Error DBMS table not found Invalid object name 'sde.sessions_137833_5'
BUG-000143165 - Validate topology does not clean dirty areas created for errors features.
BUG-000142062 - Reconcile and Post should not be creating dirty areas for changes in the DEFAULT version
BUG-000141879 - Optimize the VersionManagementServer VersionResource for the default versions locking information
BUG-000141813 - AddTerminalConfiguration is sorting valid paths (Build algorithm bug)
BUG-000141793 - Branch version change owner (alter version) can cause cached versions to have incorrect information for new owners.
BUG-000141670 - Common Table Expressions (CTE) query not using the ancestor moment timestamp for branch requests, returning incorrect results.
BUG-000141477 - Do not acquire a shared lock on gdb_items during asynchronous validate topology and update subnetwork
BUG-000141458 - Add index hints to branch versioned queries which delete by gdb_branch_id
BUG-000141457 - Add index hints to the branch versioned statements used by the trim operation
BUG-000141456 - Connection not caching spatial index properties resulting in repetitive queries being executed
BUG-000141455 - Add index hints to branch versioned insert statements to ensure the appropriate access path for obtaining the active row
BUG-000141454 - Add index hints to the update statements executed by reconcile and post operation
BUG-000141365 - Map service export operation takes longer when the service has annotation layers
BUG-000141095 - Pro branch versioning editing workflows can lead to server side crashes when split is called on the feature service
BUG-000140825 - There is a performance decrease when the map services contain annotations in servers with newer versions than ArcGIS Server 10.3.1.
BUG-000140704 - REST - measureToGeometry doesn't return the intermediate route when the from and to routeID have the same routeID in Postmile
BUG-000140539 - STIntersects() queries do not use the spatial index
BUG-000140525 - Implement the Validate optimization, when tracing to dirty subnetworks. When a tier contains no subnetworks do not trace the tier, because nothing could be marked as dirty.
BUG-000140449 - Connections blocked by exclusive table lock on sde_process_information.
BUG-000140443 - Validate of content feature generates updates for all associations of the container feature
BUG-000140314 - Realigning an existing centerline fails with Error: Underlying DBMS error 'Conversion failed when converting from a character string to uniqueidentifier" due to routeID field type being a GUID.
BUG-000140214 - Post holding shared table lock on gdb_itemtypes for the duration of the post operation
BUG-000140107 - Feature services in specific scenario fail to render completely when publishing from PostgreSQL PostGIS and Oracle SDO_Geometry data.
BUG-000140030 - Improve performance for branch query with UUID log file table join.
BUG-000140013 - Dead lock can be encountered when multiple connections hold exclusive locks on the sde_process_information and sde_table_locks tables.
BUG-000139968 - Upgrade can create incorrect conditional index on GDB_Locks table.
BUG-000139833 - Deadlocking may on SDE_branches & SDE_branch_tables_modified tables during simultaneous reconcile and post operations.
BUG-000139379 - Conflict propagation incorrectly occurs in a specific scenario with Attributed Relationships and Branch Versioning.
BUG-000139299 - Editing Performance on Enabled Network Topo
BUG-000138999 - Extend object class cache to support controller datasets within the workspace
BUG-000138365 - Adding multiple associations should update the source/target features to trigger attribute rules (filegdb bug)
BUG-000138212 - Validate Topology fails for dirty areas with Subnetwork Errors, "Edit operation failed: ERROR".
BUG-000137729 - A hosted feature layer shared from ArcGIS Pro using ArcGIS Pro default datum transformation displays a shift in Portal Map Viewer when using Esri Basemaps as a background map.
BUG-000137359 - Reconciling changes in a branch version causes ArcGIS Pro to stop responding.
BUG-000137346 - Crash occurs when reconcile is executed while the intermediate table is not registered as versioned.
BUG-000137303 - Review error reporting via JSONResponse when an HR is returned in the VersionManagementServer
BUG-000137260 - Optimize reconcile when the majority of features have been edited
BUG-000137139 - Optimize UpdateAssociationInfo function by splitting the query to discover from/toglobalid associations
BUG-000136979 - Validate Network Topology incorrectly allocating large amounts of memory impacting server soc mem usage
BUG-000136930 - In a branch versioned service, sourcing from a PostgreSQL database, any interruption to the connection results into underlying DBMS error until service is restarted.
BUG-000136892 - When a -1 is returned to ArcGIS Pro the conflict resolution dialog is unable to properly present the conflicts
BUG-000136889 - After upgrading Enterprise Geodatabase 10.7.1 to 10.8.1 and running the query to get Next_RowID, the following error message is returned: Msg 8144, Level 16, State 2, Procedure DBO.i13_get_ids, Line 0 [Batch Start Line 0] Procedure or function i13_get_ids has too many arguments specified.
BUG-000136296 - Long running reconciles may block users from editing Default or reconciling other versions with Branch Versioning.
BUG-000136284 - Editing data which are registered as multibranch causes lock escalation and blocking scenarios in the geodatabases in the SQL Server.
BUG-000136107 - The Update Subnetwork tool fails and returns the error message, "ERROR 001400: The server took too long to answer. The client has timed out. (status code 28). Failed to execute (UpdateSubnetwork)."
BUG-000135328 - Reconcile fails on a branch version and returns the error message, "A row with this OID already exists."
BUG-000135117 - Updating the subnetwork on a geographic coordinate system (GCS) spatial reference utility network fails the second time for short lines.
BUG-000135099 - Branch versioned data owned by DBO or SDE allows standard portal users access to
BUG-000134954 - Reconciling multiple versions in the utility network using the Reconcile Versions tool crashes the ArcSOC.exe instance.
BUG-000134950 - Crash occurs when reconcile is executed while a related destination table was not registered as versioned
BUG-000134496 - Using the 'Reconcile Versions' tool and leaving the 'Abort if conflicts detected' parameter unchecked, the session is still aborting the reconcile.
BUG-000133978 - Unable to execute the 'Export Report to PDF' ArcPy function outside of the ArcGIS Pro environment.
BUG-000133698 - Enabling the topology with the 'Only generate errors' option does not clean the dirty areas of the error.
BUG-000133185 - The 'Validate Network Topology' tool fails, and returns the following error message, "Edit operation failed. ERROR:"
BUG-000132887 - The electric subnet lines and electric lines do not overlap when the UN is in a GCS of 'GDA2020'.
BUG-000132610 - Updating/overwriting a csv fails if the first 150 records are removed.
BUG-000130888 - The Register with Geodatabase tool fails when registering an empty feature class
BUG-000124574 - Certain Living Atlas Premium content layers do not successfully display in the legend of a map printed from Web AppBuilder for ArcGIS.
BUG-000115504 - The ArcGIS Pro Append tool is very slow if the target feature class participates in a relationship class with messaging enabled.

Installing this patch on Windows

This patch should be installed on all ArcGIS Server installations related to the ArcGIS Server site. The ArcGIS Server 10.9.1 Setup Program Patch is a mandatory prerequisite for installing this patch on Windows. Please download and install the ArcGIS Server 10.9.1 Setup Program Patch before attempting to install this patch.

The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

Step 1. Download the appropriate file to a location other than your ArcGIS installation location.

ArcGIS Enterprise 11.1

ArcGIS Server	ArcGIS-111-S-BVDC-Patch.msp
Checksum (SHA256)	E263C80C0CA0404DDACABC78307C765CEA6D5C8866554C6682790FCEEF252590

ArcGIS Enterprise 10.9.1

ArcGIS Server	ArcGIS-1091-S-BVDC-Patch.msp
Checksum (SHA256)	4C8C810F360D0B54B287B49AD386F68FD7E22D47A92CA62EA86507F85982981B

ArcGIS Enterprise 10.8.1

ArcGIS Server	ArcGIS-1081-S-BVDC-Patch.msp
Checksum (SHA256)	C9943F505C0A42C33DA3498BE7F91B35617211EBC8F385E7F8DBE79B89631FD7

Step 2. Make sure you have write access to your ArcGIS installation location.

Step 3. Double-click ArcGIS-<Version>-BVDC-Patch.msp to start the setup process.

NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:

msiexec.exe /p [location of Patch]\ArcGIS-<Version>-BVDC-Patch.msp

Installing this patch on Linux

Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder. This patch should be installed on all ArcGIS Server installations related to the ArcGIS Server site.

Step 1. Download the appropriate file to a location other than your ArcGIS installation location.

ArcGIS Enterprise 11.1

ArcGIS Server	ArcGIS-111-S-BVDC-Patch-linux.tar
Checksum (SHA256)	ABE77A7802BA7848DCC834D807F848D23CF40C8B8C03D11787BA17F8BFA2FA7F

ArcGIS Enterprise 10.9.1

ArcGIS Server	ArcGIS-1091-S-BVDC-Patch-linux.tar
Checksum (SHA256)	F5133DBF1BD5FC6C30DD93A87A312B2FC8706C384732AAF3020504D98FA2FE78

ArcGIS Enterprise 10.8.1

ArcGIS Server	ArcGIS-1081-S-BVDC-Patch-linux.tar
Checksum (SHA256)	022555048CD623C84635B1BF1F6301E842CA5D99EC1670B1E5912326271DF36A

Step 2. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.

Step 3. Extract the specified tar file by typing:

% tar -xvf ArcGIS-<Version>-BVDC-Patch-Linux.tar

Step 4. Start the installation by typing:

% ./applypatch

This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

Upgrade a geodatabase

It is necessary to upgrade your geodatabase based on the nature of fixes included. See the Upgrade the Geodatabase section on the Geodatabase management page for your individual DBMS platform for more information. Executing the steps below will not cause any harm if your geodatabase is already at the required level, so the recommended approach is to follow the steps as outlined. If your database is already at the required level, you will get a message indicating so. If the geodatabase release you are using is at a higher release than the patch, you will need to upgrade from software at the same or higher release to ensure all required fixed are applied. These specific releases are listed / updated in the knowledge-based article mentioned in the patch Summary.

Upgrading from ArcGIS Server requires the use of Python. If you are working with ArcGIS Server on Windows or Linux, you can access the appropriate Python 3 environment by using the python.exe which is included with the framework/runtime components of ArcGIS Server. Additionally, on Windows a script batch file is available to launch the Python 3 environment. To perform the upgrade, create a script using this example Python syntax, and name the script upgrade_gdb.py.

import arcpy

arcpy.UpgradeGDB_management(

input_workspace=r"C:\temp\sysadmin_connection.sde",

     input_prerequisite_check="PREREQUISITE_CHECK",
     input_upgradegdb_check="UPGRADE"
     )
 warnings = arcpy.GetMessages(1)
 errors = arcpy.GetMessages(2)
 if "WARNING 003929" in warnings:
     print(warnings)
 elif "Recovery versions" in warnings:
     recovery_versions = warnings[warnings.find("Recovery versions"):warnings.find(")") + 1]
     for item in warnings.split("\n"):
         if "sde_setup.log" in item:
             logfile_loc = item.strip()
     print("--------------------------------------------------------------------------------------------------")
     print(f"WARNING 003929: During the upgrade {recovery_versions} were created that require further review.")
     print(f"Review {logfile_loc} for more detail.")
     print("--------------------------------------------------------------------------------------------------")
 if not errors:
     print(errors)

On Windows, run the upgrade script explicitly using the Python 3 environment. If ArcGIS Server is installed to the default location, the script can be executed with either of the following commands:

"C:\Program Files\ArcGIS\Server\framework\runtime\ArcGIS\bin\Python\scripts\propy.bat" C:\temp\upgrade_gdb.py

"C:\Program Files\ArcGIS\Server\framework\runtime\ArcGIS\bin\Python\envs\arcgispro-py3\python.exe" C:\temp\upgrade_gdb.py

On Linux, launch the Python 3 environment using the following commands:

source /<arcgis_server_installation_directory>/arcgis/server/framework/etc/arcenv

unset LD_PRELOAD

unset CONDA_DEFAULT_ENV

And then execute the upgrade script with the following command:

wine "Z:\<arcgis_server_installation_directory>\arcgis\server\framework\runtime\ArcGIS\bin\Python\envs\arcgispro-py3\python.exe" <path_To>\upgrade_gdb.py

Uninstalling this patch on Windows

To uninstall this patch on Windows, open the Windows Control Panel and navigate to installed programs. Make sure that "View installed updates" (upper left side of the Programs and Features dialog) is active. Select the patch name from the programs list and click Uninstall to remove the patch.

Uninstalling this patch on Linux

To remove this patch on versions 10.7 and higher, navigate to the <Product Installation Directory>/.Setup/qfe directory and run the following script as the ArcGIS Install owner:

./removepatch.sh

The removepatch.sh script allows you to uninstall previously installed patches or hot fixes. Use the -s status flag to get the list of installed patches or hot fixes ordered by date. Use the -q flag to remove patches or hot fixes in reverse chronological order by date they were installed. Type removepatch -h for usage help.

Restart your ArcGIS services.

How to identify which ArcGIS products are installed

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

PatchFinder for Windows

PatchFinder for Linux/Unix

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options