Skip to main content

Patches and updates

ArcGIS Server 10.8.1 Utility Network Patch 3

Published: March 30, 2021

Summary

This patch addresses several functional issues with the 10.8.1 utility network release. In addition to the issues listed below, the patch addresses performance with validation, trace, and update subnetworks specifically for hierarchical networks.

Description

Esri® announces the ArcGIS Server 10.8.1 Utility Network Patch 3. This patch focuses on quality and performance particularly in the areas of validate and update subnetwork, and is recommended for all utility network customers using ArcGIS Enterprise 10.8.1. Users with hierarchical subnetworks (gas and water) will benefit to the updates that address issues with validate, trace, and update subnetwork not completing when there are large subnetworks in the hierarchy. In addition, this patch deals specifically with the issues listed below under Issues Addressed with this patch.

 

Issues Addressed with this patch

 

  • BUG-000136889 - After upgrading Enterprise Geodatabase 10.7.1 to 10.8.1 and running the query to get Next_RowID, the following error message is returned: Msg 8144, Level 16, State 2, Procedure DBO.i13_get_ids, Line 0 [Batch Start Line 0] Procedure or function i13_get_ids has too many arguments specified.
  • BUG-000136296 - Long running reconciles may block users from editing Default or reconciling other versions with Branch Versioning.
  • BUG-000135328 - Reconcile fails on a branch version and returns the error message, "A row with this OID already exists."
  • BUG-000135117 - Updating the subnetwork on a geographic coordinate system (GCS) spatial reference utility network fails the second time for short lines.
  • BUG-000134954 - Reconciling multiple versions in the utility network using the Reconcile Versions tool crashes the ArcSOC.exe instance.
  • BUG-000134950 - Crash occurs when reconcile is executed while a related destination table was not registered as versioned
  • BUG-000134496 - Using the 'Reconcile Versions' tool and leaving the 'Abort if conflicts detected' parameter unchecked, the session is still aborting the reconcile.
  • BUG-000133698 - Enabling the topology with the 'Only generate errors' option does not clean the dirty areas of the error.
  • BUG-000132887 - The electric subnet lines and electric lines do not overlap when the UN is in a GCS of 'GDA2020'.
  • BUG-000130888 - The Register with Geodatabase tool fails when registering an empty feature class

To avoid conflicts this patch also addresses:

  • BUG-000137139 - Optimize UpdateAssociationInfo function by splitting the query to discover from/toglobalid associations
  • BUG-000136979 - Validate Network Topology incorrectly allocating large amounts of memory impacting server soc mem usage
  • BUG-000136892 - When a -1 is returned to ArcGIS Pro the conflict resolution dialog is unable to properly present the conflicts
  • BUG-000136296 - Long running reconciles may block users from editing Default or reconciling other versions with Branch Versioning.
  • BUG-000136284 - Editing data which are registered as multibranch causes lock escalation and blocking scenarios in the geodatabases in the SQL Server.
  • BUG-000135328 - Reconcile fails on a branch version and returns the error message, "A row with this OID already exists."
  • BUG-000135117 - Updating the subnetwork on a geographic coordinate system (GCS) spatial reference utility network fails the second time for short lines.
  • BUG-000134954 - Reconciling multiple versions in the utility network using the Reconcile Versions tool crashes the ArcSOC.exe instance.
  • BUG-000134950 - Crash occurs when reconcile is executed while a related destination table was not registered as versioned
  • BUG-000134496 - Using the 'Reconcile Versions' tool and leaving the 'Abort if conflicts detected' parameter unchecked, the session is still aborting the reconcile.
  • BUG-000133698 - Enabling the topology with the 'Only generate errors' option does not clean the dirty areas of the error.
  • BUG-000132887 - The electric subnet lines and electric lines do not overlap when the UN is in a GCS of 'GDA2020'.

 

Installing this patch on Windows

 

Installation Steps:

 

This patch should be installed on all ArcGIS Server installations related to the ArcGIS Server site.

The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

  1. Download the appropriate file to a location other than your ArcGIS installation location.

    ArcGIS 10.8.1  
       
         ArcGIS Server ArcGIS-1081-S-UN3-Patch.msp
         Checksum
         (SHA256)    		 24F1B62E167BD23B26320BB6A8F9831032290F4EF33EABCD72B25F742B271DBD
       
  2. Make sure you have write access to your ArcGIS installation location.
  3. Double-click ArcGIS-1081-S-UN3-Patch.msp to start the setup process.

    NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:

    msiexec.exe /p [location of Patch]\ArcGIS-1081-S-UN3-PatchB.msp

 

Installing this patch on Linux

 

Installation Steps:

 

Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder. This patch should be installed on all ArcGIS Server installations related to the ArcGIS Server site.

The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.

  1. Download the appropriate file to a location other than your ArcGIS installation location.

    ArcGIS 10.8.1  
       
         ArcGIS Server ArcGIS-1081-S-UN3-Patch-linux.tar
         Checksum
         (SHA256)    		 D57F4CF755AF8FBBD19E8FDEE283143AD21271E00CC5E80FD71316C5B466E036
       
  2. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.
  3. Extract the specified tar file by typing:

    % tar -xvf ArcGIS-1081-S-UN3-Patch-linux.tar

  4. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

Uninstalling this patch on Windows

To uninstall this patch on Windows, open the Windows Control Panel and navigate to installed programs. Make sure that "View installed updates" (upper left side of the Programs and Features dialog) is active. Select the patch name from the programs list and click Uninstall to remove the patch.

 

Uninstalling this patch on Linux

 

Uninstalling on Linux is only available on version 10.5.1 or higher. These instructions are specific to 10.7 and higher. To remove this patch, navigate to the <Product Installation Directory>/.Setup/qfe folder and run the following script as the ArcGIS Install owner:


./removepatch.sh

The removepatch.sh script allows you to uninstall previously installed patches or hot fixes. Use the -s status flag to get the list of installed patches or hot fixes ordered by date. Use the -q flag to remove patches or hot fixes in reverse chronological order by date they were installed. Type removepatch -h for usage help.

 

Patch Updates

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

November 24, 2021 The windows setup(s) of this patch have been updated with new digital signatures. This change addresses the possible install error:

A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
 

How to identify which ArcGIS products are installed

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

Getting Help

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.


Download ID:7884

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options