Patches and updates
ArcGIS Server 10.8.1 Utility Network Patch 2
Summary
Introduction
January 20, 2021: Esri has released revised setups for this patch to address an issue for organizations using parcel fabrics. These revised setups will install over top of the original patch however the Patch Notification tool is not able to report that a new, revised version has been installed. If you use the Patch Notification utility, please first uninstall the original patch and then run the PatchNotification utility to install this new, revised patch.
Important Note: Esri has discovered an issue with ArcGIS Server 10.8.1 Utility Network Patch 2 and the patch is being temporarily pulled back until the problem can be resolved. The issue is isolated to users of the parcel fabric that have downloaded and installed this patch alongside another previously released patch that contained a number of fix for parcel fabrics. Customers that have already downloaded and installed this patch do not need to uninstall it unless parcel fabrics are used within their organization. A new version of this patch will be made available shortly at which time Esri recommends that all ArcGIS Enterprise 10.8.1 users install the new version of ArcGIS Server 10.8.1 Utility Network Patch 2, including those that have already downloaded and installed the previous version of the patch.
Esri® announces the ArcGIS Server 10.8.1 Utility Network Patch 2. This patch focuses on quality and performance, and recommended for all utility network customers using ArcGIS Enterprise 10.8.1. This patch deals specifically with the issues listed below under Issues Addressed with this patch.
Issues Addressed with this patch
- BUG-000136296 - Long running reconciles may block users from editing Default or reconciling other versions with Branch Versioning.
- BUG-000135328 - Reconcile fails on a branch version and returns the error message, "A row with this OID already exists."
- BUG-000135117 - Updating the subnetwork on a geographic coordinate system (GCS) spatial reference utility network fails the second time for short lines.
- BUG-000134954 - Reconciling multiple versions in the utility network using the Reconcile Versions tool crashes the ArcSOC.exe instance.
- BUG-000134950 - Crash occurs when reconcile is executed while a related destination table was not registered as versioned
- BUG-000134496 - Using the 'Reconcile Versions' tool and leaving the 'Abort if conflicts detected' parameter unchecked, the session is still aborting the reconcile.
- BUG-000133698 - Enabling the topology with the 'Only generate errors' option does not clean the dirty areas of the error.
- BUG-000132887 - The electric subnet lines and electric lines do not overlap when the UN is in a GCS of 'GDA2020'.
Installing this patch on Windows
Installation Steps:
This patch should be installed on all ArcGIS Server installations related to the ArcGIS Server site.
The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.
- Download the appropriate file to a location other than your ArcGIS installation location.
ArcGIS 10.8.1 Checksum (Md5) ArcGIS Server ArcGIS-1081-S-UN2-PatchB.msp B4B20C8491FC4EBF2AF612928B70391D - Make sure you have write access to your ArcGIS installation location.
- Double-click ArcGIS-1081-S-UN2-PatchB.msp to start the setup process.
NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:
msiexec.exe /p [location of Patch]\ArcGIS-1081-S-UN2-PatchB.msp
Installing this patch on Linux
Installation Steps:
Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder. This patch should be installed on all ArcGIS Server installations related to the ArcGIS Server site.
The ArcGIS product listed in the table must be installed on your system before you can install a patch. Each patch setup is specific to the ArcGIS product in the list. To determine which products are installed on your system, please see the How to identify which ArcGIS products are installed section. Esri recommends that you install the patch for each product that is on your system.
- Download the appropriate file to a location other than your ArcGIS installation location.
ArcGIS 10.8.1 Checksum (Md5) ArcGIS Server ArcGIS-1081-S-UN2-PatchB-linux.tar 16BAD845D22C13052083457D0D70B2C4 - Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.
- Extract the specified tar file by typing:
% tar -xvf ArcGIS-1081-S-UN2-PatchB-linux.tar
- Start the installation by typing:
% ./applypatch
This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.
Uninstalling this patch on Windows
Uninstalling this patch on Linux
./removepatch.sh The removepatch.sh script allows you to uninstall previously installed patches or hot fixes. Use the -s status flag to get the list of installed patches or hot fixes ordered by date. Use the -q flag to remove patches or hot fixes in reverse chronological order by date they were installed. Type removepatch -h for usage help.
Patch Updates
Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.
January 20, 2021: Esri has released revised setups for this patch to address an issue for organizations using parcel fabrics. These revised setups will install over top of the original patch however the Patch Notification tool is not able to report that a new, revised version has been installed. If you use the Patch Notification utility, please first uninstall the original patch and then run the PatchNotification utility to install this new, revised patch.
January 5, 2021: Esri has discovered an issue with ArcGIS Server 10.8.1 Utility Network Patch 2 and the patch is being temporarily pulled back until the problem can be resolved. The issue is isolated to users of the parcel fabric that have downloaded and installed this patch alongside another previously released patch that contained a number of fix for parcel fabrics. Customers that have already downloaded and installed this patch do not need to uninstall it unless parcel fabrics are used within their organization. A new version of this patch will be made available shortly at which time Esri recommends that all ArcGIS Enterprise 10.8.1 users install the new version of ArcGIS Server 10.8.1 Utility Network Patch 2, including those that have already downloaded and installed the previous version of the patch
November 24, 2021 The windows setup(s) of this patch have been updated with new digital signatures. This change addresses the possible install error:
A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
How to identify which ArcGIS products are installed
To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.
Getting Help
Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.
Download ID:7849
Get help from ArcGIS experts
Download the Esri Support App