Patches and updates

ArcSDE 9.3 Service Pack 1 Memory Allocation Patch

Published: March 18, 2009

Summary

This patch is required for all 9.3 Service Pack 1 users. It fixes an issue with curves, a memory overwrite during archiving and a memory leak in ArcSDE for Oracle. It also fixes a separate memory leak and a compression bug in all DBMS implementations.

Description

The ArcSDE 9.3 Service Pack 1 Memory Allocation Patch is to be applied to ArcSDE and ArcSDE clients that already have 9.3 Service Pack 1 installed.

This general ArcSDE patch fixes memory allocation issues that can cause unexpected behavior in versioned geodatabases. One fix addresses inefficient memory use affecting all supported database platforms. Two of the memory allocation issues are specific to the Oracle database. Unexpected behavior can include excessive memory use or a server/application crash after a process (e.g.; a batch reconcile process) runs for several hours. This patch also has some additional fixes in it that having nothing to do with memory allocation. We added fixes for an issue with curves specific to Oracle’s ST_GEOMETRY where an attribute only change incorrectly generalizes the curve. We also fixed a compression bug which affects all DBMS implementations.

Please see the Issues Fixed with this Patch list for details.

Installing the Patch

ArcSDE 9.3 Service Pack 1 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using an administrator account.

REQUIRED INSTALL STEP: If you connect to ArcSDE 9.3 via an Application Server and Direct Connect connections using ArcGIS 9.3, ArcIMS 9.3, or 9.3 Workstation make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

Server Install for UNIX

During installation, you can either save the original 9.3 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

ArcSDE 9.3 Service Pack 1 must be installed on the server and your client applications before you install this Patch.

  1. Download the appropriate tar file to a location other than $SDEHOME:


  2. Stop your current ArcSDE service if one is running.

    % sdemon -o shutdown

    NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

    # /usr/sbin/slibclean

    (Optional) To list the libraries loaded into memory, as ROOT user, type:

    # /usr/sbin/genkld

    For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

  3. Extract the specified tar file by typing:
    % tar -xvf sde93sp1-memorypatch-<Database>-<Platform>.tar
  4. Start the installation by typing:
    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  5. (This step is for Oracle only, all other DBMS skip to the next step)

    Before running "sdesetup -o upgrade", you must grant the following additional permissions to the SDE user in Oracle: ALTER ANY TABLE
    ANALYZE ANY
    CREATE ANY INDEX
    CREATE ANY PROCEDURE
    CREATE ANY SEQUENCE
    CREATE ANY TRIGGER
    CREATE ANY VIEW
    CREATE INDEXTYPE
    CREATE LIBRARY
    CREATE OPERATOR
    CREATE PROCEDURE
    CREATE PUBLIC SYNONYM
    CREATE SESSION
    CREATE SEQUENCE
    CREATE TABLE
    CREATE TRIGGER
    CREATE TYPE
    DROP ANY INDEX
    DROP ANY PROCEDURE
    DROP ANY SEQUENCE
    DROP ANY TABLE
    DROP ANY VIEW
    DROP PUBLIC SYNONYM
    EXECUTE ANY PROCEDURE
    SELECT ANY SEQUENCE
    SELECT ANY TABLE
    UNLIMITED TABLESPACE

  6. To upgrade, run sdesetup. Failure to do so may cause problems in starting the service or with connecting to the geodatabase. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:

    %sdesetup -o upgrade -d <ORACLE9I|ORACLE10G|ORACLE11G|SQLSERVER|DB2|INFORMIX|POSTGRESQL> –u <DB_Admin_User> –p <DB_Admin_password>

  7. (This step is for Oracle only, all other DBMS skip to the next step)
    After the upgrade completes, you may revoke the following permissions from the SDE user account:

    ANALYZE ANY
    ALTER ANY INDEX
    ALTER ANY TABLE
    CREATE ANY INDEX
    CREATE ANY TRIGGER
    CREATE ANY VIEW
    DROP ANY INDEX
    DROP ANY TABLE
    DROP ANY VIEW
    DROP ANY PROCEDURE
    DROP ANY SEQUENCE
    EXECUTE ANY PROCEDURE
    SELECT ANY SEQUENCE
    CREATE INDEXTYPE
    CREATE LIBRARY
    CREATE OPERATOR
    CREATE TYPE

  8. Restart your service.

    % sdemon -o start

  9. (This step only applies to Oracle or PostgreSQL users who have the ArcSDE component and the DBMS installed on separate servers. All other users proceed to the next step.)

    For Oracle:

    If you have the ArcSDE component and Oracle installed on separate servers, there are three shared libraries used by EXTPROC that must be copied to the Oracle server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the Oracle server. Be sure the files copied to the Oracle server are designed to run on the operating system of the Oracle server. See the ArcSDE for Oracle installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the Oracle server.

    Library Name OS-dependent file names
    st_shapelib st_shapelib.dll (Windows), libst_shapelib.so (Solaris, Linux, and HP-UX Itanium), libst_shapelib.sl (HP-UX PA-RISC), libst_shapelib_64.so (IBM)
    Projection Engine pe.dll (Windows), libpe.so (Solaris, Linux, and HP-UX Itanium), libpe.sl (HP-UX PA-RISC), libpe_64.so (IBM)
    Geometry sg.dll (Windows), libsg.so (Solaris, Linux, and HP-UX Itanium), libsg.sl (HP-UX PA-RISC), libsg_64.so (IBM)

    For PostreSQL:

    If you have the ArcSDE component and PostgreSQL installed on separate servers, there are three libraries that must be copied to the PostgreSQL server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the PostgreSQL server. Be sure the files copied to the PostgreSQL server are designed to run on the operating system of the PostgreSQL server. See the ArcSDE for PostgreSQL installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the PostgreSQL server.

    Library Name OS-dependent file names
    st_geometry st_shapelib.dl (Windows), st_geometry.so (Linux)
    Projection Engine pe.dll (Windows), libpe.so (Linux)
    Geometry sg.dll (Windows), libsg.so (Linux)

  10. If you have ArcSDE installed on more than one server, perform steps 1 through 8 for each one.
    Note:If you have multiple geodatabases on the same server, you only have to install the patch once on the server, but you must perform steps 5 through 8 to upgrade each of the geodatabases and restart their corresponding services if services exist.

Server Install for Windows

  • Windows Installation Notes:

    ArcSDE 9.3 Service Pack 1 must be installed on the server and your client applications before you install this Patch.

Installation Steps

  1. Install this Patch using an administrator account. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.
  2.  Download the appropriate files to a location other than the ArcSDE installation folder:


  3. Double-click the appropriate executable to start the install process.
  4.  When Setup starts, follow the instructions on your screen.
  5.  (This step is for Oracle only, all other DBMS skip to the next step)
  6. Before running "sdesetup -o upgrade", you must grant the following additional permissions to the SDE user in Oracle:

    ALTER ANY INDEX
    ALTER ANY TABLE
    ANALYZE ANY
    CREATE ANY INDEX
    CREATE ANY PROCEDURE
    CREATE ANY SEQUENCE
    CREATE ANY TRIGGER
    CREATE ANY VIEW
    CREATE INDEXTYPE
    CREATE LIBRARY
    CREATE OPERATOR
    CREATE PROCEDURE
    CREATE PUBLIC SYNONYM
    CREATE SESSION
    CREATE SEQUENCE
    CREATE TABLE
    CREATE TRIGGER
    CREATE TYPE
    DROP ANY INDEX
    DROP ANY PROCEDURE
    DROP ANY SEQUENCE
    DROP ANY TABLE
    DROP ANY VIEW
    DROP PUBLIC SYNONYM
    EXECUTE ANY PROCEDURE
    SELECT ANY SEQUENCE
    SELECT ANY TABLE
    UNLIMITED TABLESPACE

  7. As the ArcSDE Administrative user run the sdesetup command. Failure to do so may cause problems in starting the service or with connecting to the geodatabase. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:

    c:\ sdesetup -o upgrade -d <ORACLE9I|ORACLE10G|ORACLE11G|SQLSERVER|DB2|INFORMIX|POSTGRESQL> –u <DB_Admin_User> –p <DB_Admin_password>

  8. (This step is for Oracle only, all other DBMS skip to the next step)
    After the upgrade completes, you may revoke the following permissions from the SDE user account:

    ANALYZE ANY
    ALTER ANY INDEX
    ALTER ANY TABLE
    CREATE ANY INDEX
    CREATE ANY TRIGGER
    CREATE ANY VIEW
    DROP ANY INDEX
    DROP ANY TABLE
    DROP ANY VIEW
    DROP ANY PROCEDURE
    DROP ANY SEQUENCE
    EXECUTE ANY PROCEDURE
    SELECT ANY SEQUENCE
    CREATE INDEXTYPE
    CREATE LIBRARY
    CREATE OPERATOR
    CREATE TYPE

  9. As the ArcSDE administrative user, run the following command to restart the ArcSDE service:

    c:\sdemon -o start

  10. (This step only applies to Oracle or PostgreSQL users who have the ArcSDE component and the DBMS installed on separate servers. All other users proceed to the next step.)

    For Oracle:

    If you have the ArcSDE component and Oracle installed on separate servers, there are three shared libraries used by EXTPROC that must be copied to the Oracle server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the Oracle server. Be sure the files copied to the Oracle server are designed to run on the operating system of the Oracle server. See the ArcSDE for Oracle installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the Oracle server.

    Library Name OS-dependent file names
    st_shapelib st_shapelib.dll (Windows), libst_shapelib.so (Solaris, Linux, and HP-UX Itanium), libst_shapelib.sl (HP-UX PA-RISC), libst_shapelib_64.so (IBM)
    Projection Engine pe.dll (Windows), libpe.so (Solaris, Linux, and HP-UX Itanium), libpe.sl (HP-UX PA-RISC), libpe_64.so (IBM)
    Geometry sg.dll (Windows), libsg.so (Solaris, Linux, and HP-UX Itanium), libsg.sl (HP-UX PA-RISC), libsg_64.so (IBM)

    For PostreSQL:

    If you have the ArcSDE component and PostgreSQL installed on separate servers, there are three libraries that must be copied to the PostgreSQL server. Check the list of files altered by this patch. If any of the following files are on this list, new versions of the file must be copied to the PostgreSQL server. Be sure the files copied to the PostgreSQL server are designed to run on the operating system of the PostgreSQL server. See the ArcSDE for PostgreSQL installation guide for instructions.

    If the file is not in the list, new versions of it do not need to be copied to the PostgreSQL server.

    Library Name OS-dependent file names
    st_geometry st_shapelib.dl (Windows), st_geometry.so (Linux)
    Projection Engine pe.dll (Windows), libpe.so (Linux)
    Geometry sg.dll (Windows), libsg.so (Linux)
    Geometry sg.dll, libsg.so (.sl for HP-UX PA-RISC, _64.so for IBM64)

  11. If you have ArcSDE installed on more than one server, perform steps 1 through 8 for each one.
    Note:If you have multiple geodatabases on the same server, you only have to install the patch once on the server, but you must perform steps 5 through 8 to upgrade each of the geodatabases and restart their corresponding services if services exist.

ArcSDE SDK Install for UNIX

  1. Download the appropriate tar file to a location other than ArcSDE SDK installation location:
    All Databases (32 bit Operating System)
    All Databases (64 bit Operating System)

  2. Extract the specified tar file by typing:
    % tar -xvf sde93sp1-memorypatch-sdk-<Platform>.tar
  3. Start the installation by typing:
    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

ArcSDE SDK Install for Windows

  1. Make sure you have write access to the ArcSDE SDK installation folder.
  2.  Download the appropriate files to a location other than the ArcSDE SDK installation folder:


  3. Double-click the appropriate executable to start the install process
  4. When Setup starts, follow the instructions on your screen.

ESRI Products connecting to ArcSDE (Application Server and Direct Connect connections)

UNIX

If you connect to ArcSDE 9.3 Service Pack 1 using ArcInfo 9.3 Workstation or ArcIMS 9.3 Service Pack 1 on any supported Unix/Linux platform please follow the steps below to install this Patch to your ArcInfo 9.3 or ArcIMS 9.3 SP1 software installation directory. This also applies if connecting to ArcSDE 9.3 SP1 using ArcGIS Server 9.3 SP1, ArcGIS Engine 9.3 SP1, and ArcGIS Reader9.3 SP1 for Sun Solaris and Linux:

  • Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:


  • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
  •  Uncompress and extract the specified tar file for your platform. At the UNIX prompt type:
    %cd <installation_directory> (i.e. cd $ARCHOME)
    %gunzip sde93sp1-memorypatch-esri-<Platform>.tar.gz
    %tar xvf sde93sp1-memorypatch-esri-<Platform>.tar
  • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

    Windows

    • If you connect to ArcSDE 9.3 Service Pack 1 using ArcGIS 9.3 Service Pack 1, ArcIMS 9.3 Service Pack 1, or ArcInfo Workstation 9.3, please follow the steps below to install this Patch to your ArcGIS 9.3 SP1, ArcIMS 9.3 SP1, or ArcInfo Workstation 9.3 installation folder:

    • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:


    • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
    • Use WinZip to extract the new file from sde93sp1-memorypatch-esri-win.zip to the appropriate installation folder, see list below:
      • ArcGIS Desktop, Workstation, or ArcView 9 - <installation-folder>\bin
      • ArcView GIS - <installation-folder>\arcview3\bin
      • ArcIMS – <installation-folder>\server\bin:
        If it is listed in the files included section, extract sde.dll to <installation-folder>\Metadata\Commands
        If it is listed in the files included section, extract sde.dll to <installation-folder>\IndexBuilder
    • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

How to identify which Patch is installed

UNIX

To find out what ArcGIS products are currently installed on your machine, copy the PatchFinder.tar utility to your machine and run it from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.

ArcGIS Engine Developer Kit for C++
ArcGIS Engine Developer Kit for the Java Platform
ArcGIS Engine Runtime
ArcGIS Server for the Java Platform
ArcIMS
ArcIMS Web ADF for the Java Platform
ArcInfo Workstation
ArcReader
ArcSDE

Extract the tar file by typing:

% tar xvf PatchFinder.tar

Run the utility by typing:

% ./PatchFinder

Windows

To find out what products are currently installed on your machine, run the PatchFinder93.exe utility. This utility provides a report detailing which ArcGIS products are currently installed on your machine. This will help determine which product Service Packs you should install on your machine. The report also details which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.

ArcGIS ArcReader
ArcGIS Desktop (ArcView, ArcEditor, ArcInfo) Includes the ArcReader fixes for the ArcReader FEATURE.
ArcGIS Desktop Developer Kit for the Microsoft .NET Framework, VB6, VBA and Visual C++
ArcGIS Engine Developer Kit for C++, the Java Platform, the Microsoft .NET Framework, VB6 and Visual C++
ArcGIS Engine Runtime
ArcGIS Image Server
ArcGIS Server for the Microsoft .NET Framework
ArcGIS Server for the Java Platform
ArcGIS Server Web ADF Runtime for the Microsoft .NET Framework
ArcIMS
ArcIMS Web ADF for the Microsoft .NET Framework
ArcIMS Web ADF for the Java Platform
ArcSDE

Service Pack Updates

Check Online Support Center periodically for the availability of additional Service Packs. New information about this Service Pack will be posted here.

March 25, 2009: AIX Oracle 9i, Solaris Oracle 9i, Solaris Oracle 11g, Windows Oracle 11g are now available for download.

April 13, 2009: Updated step 9 for both Unix and Windows Server install sections for clarity.

Getting Help

Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.



Download ID:1495

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options