Patches and updates

ArcSDE 9.0 Versioning Patch

Published: July 28, 2006

Summary

This Patch contains fixes for versioned updates and compress. Users working in a versioning environment should download and install this patch at their earliest convenience.

Description

ArcSDE 9.0 General Update Patch 2 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using your SDE user account.

REQUIRED INSTALL STEP: If you connect to ArcSDE 9.0 via an Application Server and Direct Connect connections using ArcGIS 9.0, ArcIMS 9.0, or ArcView GIS 3.3 with DBA 2.1f make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

Installation Steps:

During installation, you can either save the original 9.0 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

  1. Download the appropriate tar file to a location other than $SDEHOME:
    DB2  
    HP64 sde90-versionpatch-db2-hp64.tar
    9 MB
    IBM sde90-versionpatch-db2-ibm.tar
    8 MB
    IBM64 sde90-versionpatch-db2-ibm64.tar
    8 MB
    Linux sde90-versionpatch-db2-lx.tar
    7 MB
    Solaris64 sde90-versionpatch-db2-slrs64.tar
    9 MB
       
    Informix  
    HP sde90-versionpatch-inf-hp.tar
    9 MB
    IBM sde90-versionpatch-inf-ibm.tar
    8 MB
    Solaris sde90-versionpatch-inf-slrs.tar
    8 MB
       
    Oracle 8i  
    HP sde90-versionpatch-ora8i-hp.tar
    15 MB
    IBM sde90-versionpatch-ora8i-ibm.tar
    9 MB
    Solaris sde90-versionpatch-ora8i-slrs.tar
    10 MB
    Tru64 sde90-versionpatch-ora8i-tru64.tar
    14 MB
       
    Oracle 9i (Use these with Oracle 10g)  
    HP64 sde90-versionpatch-ora9i-hp64.tar
    11 MB
    IBM64 sde90-versionpatch-ora9i-ibm64.tar
    9 MB
    Linux sde90-versionpatch-ora9i-lx.tar
    8 MB
    Solaris sde90-versionpatch-ora9i-slrs.tar
    10 MB
    Solaris64 sde90-versionpatch-ora9i-slrs64.tar
    10 MB
    Tru64 sde90-versionpatch-ora9i-tru64.tar
    14 MB

  2. Stop your current ArcSDE service.

    % sdemon -o shutdown

  3. Extract the specified tar file by typing:

    % tar -xvf sde90-versionpatch-<Database>-<Platform>.tar

  4. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  5. Start your service again.

    % sdemon -o start

Server Install for Windows

  • Windows Installation Notes:

    • For all databases (except for SQL Server), ArcSDE 9.0 General Update Patch 2 must be installed on the server and your client applications before you install this Patch.

Installation Steps

  1. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.
  2. Download the appropriate files to a location other than the ArcSDE installation folder:
    DB2  
    sde90-versionpatch-db2-win.exe 2 MB
    Informix  
    sde90-versionpatch-inf-win.exe 2 MB
    Oracle 8i  
    sde90-versionpatch-ora8i-win.exe 2 MB
    Oracle 9i (Use this with Oracle 10g)  
    sde90-versionpatch-ora9i-win.exe 2 MB
    SQL Server  
    sde90-versionpatch-sql-win.exe 2 MB

  3. Double-click the appropriate executable to start the install process.
  4. When Setup starts, follow the instructions on your screen.
  5. As the SDE user, run the following command to restart the ArcSDE service:

    sdemon -o start

ArcSDE SDK Install for UNIX

Installation Steps

  1. Download the appropriate tar file to a location other than ArcSDE SDK installation location:
    All Databases (32 bit Operating System)  
    HP sde90-versionpatch-sdk-hp.tar
    8 MB
    IBM sde90-versionpatch-sdk-ibm.tar
    6 MB
    Linux sde90-versionpatch-sdk-lx.tar
    3 MB
    Solaris sde90-versionpatch-sdk-slrs.tar
    6 MB
       
    All Databases (64 bit Operating System)  
    HP64 sde90-versionpatch-sdk-hp64.tar
    4 MB
    IBM64 sde90-versionpatch-sdk-ibm64.tar
    4 MB
    Solaris64 sde90-versionpatch-sdk-slrs64.tar
    4 MB
    Tru64 sde90-versionpatch-sdk-tru64.tar
    10 MB

  2. Extract the specified tar file by typing:

    % tar -xvf sde90-versionpatch-sdk-<Platform>.tar

  3. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

ArcSDE SDK Install for Windows

Installation Steps

  1. Make sure you have write access to the ArcSDE SDK installation folder:.
  2. Download the appropriate files to a location other than the ArcSDE SDK installation folder:
  3. ArcSDE SDK sde90-versionpatch-sdk-win.exe 6 MB
  4. Double-click the appropriate executable to start the install process.
  5. When Setup starts, follow the instructions on your screen.

ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

  • UNIX

    • If you connect to ArcSDE 9.0 using ArcGIS 9.0 Workstation or ArcIMS 9.0 SP3 on any supported Unix/Linux platform please follow the steps below to install this Service Pack to your ArcGIS 9.0 software installation directory. This also applies if connecting to ArcSDE 9.0 using ArcGIS Server, ArcGIS Engine, and ArcGIS Reader for Sun Solaris and Linux:

      • Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:

        HP sde90-versionpatch-esri-hp.tar.Z
        8 MB
        IBM sde90-versionpatch-esri-ibm.tar.Z
        6 MB
        Linux sde90-versionpatch-esri-lx.tar.Z
        3 MB
        Solaris sde90-versionpatch-esri-slrs.tar.Z
        6 MB
        Tru64 sde90-versionpatch-esri-tru64.tar.Z
        10 MB

      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

      • Uncompress and extract the specified tar file for your platform. Ensure that the last letter of the file name is a capital Z. Otherwise, the uncompress command will not work. At the UNIX prompt type:

        %cd <installation_directory> (i.e. cd $ARCHOME or $AGSHOME)

        • <Workstation Installation Directory>/lib
        • <ArcGIS Server Installation Directory>/bin
        • <ArcGIS Engine Installation Directory>/bin
        • <ArcGIS Reader Installation Directory>/bin
        %uncompress sde90-versionpatch-esri-<Platform>.tar.Z
        %tar xvf sde90-versionpatch-esri-<Platform>.tar

        • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

         


      Windows

      • If you connect to ArcSDE 9.0 using ArcGIS 9.0, ArcIMS 9.0, ArcInfo Workstation 9.0, or ArcView GIS 3.3 with DBA 2.1f, please follow the steps below to install this Patch to your ArcGIS 9.0, ArcIMS 9.0, ArcInfo Workstation 9.0, or ArcView GIS 3.3 with DBA 2.1f installation folder:

      • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:

        sde90-versionpatch-esri-win.zip 6 MB

      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).

      • Use WinZip to extract the new file from sde90-versionpatch-esri-win.zip to the appropriate installation folder, see list below:

        • ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
        • ArcGIS Workstation - <installation-folder>\arcexe9x\bin
        • ArcView GIS - <installation-folder>\av_gis30\arcview\(bin32 & DCONNECT\LIB)
        • Depending on the ArcIMS Setup features installed, the SDE client file could be located in one or more of the following locations:
          • C:\Program Files\ArcGIS\bin
          • C:\Program Files\ArcGIS\ArcIMS\IndexBuilder
          • C:\Program Files\ArcGIS\ArcIMS\Metadata\Commands
          • C:\Program Files\ArcGIS\ArcIMS\Server\bin

      • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

    How to identify which Patch is installed


    1. UNIX

      Any modified UNIX executables (or libraries) being sent out as part of a Patch will return the unique identification number for that fix when checked with the "what" command for UNIX and the "strings" command for Linux. For example, to display the identification string for this Patch on UNIX, type:

      • %what gsrvr.static | grep QFE

        QFE-SDE-90-CQ00291858

      Windows

      To check for the presence of a Patch, for each file examine the unique identification information provided (right click, properties, version tab, item name, QFE Version). With only a few exceptions, all files modified as part of a Patch distribution can be uniquely identified in this manner. The identification string for this Patch should read:

      • QFE-SDE-90-CQ00291858

    Patch Updates

    Check the Online Support Center periodically for the availability of additional Patches or Service Packs. New information about this Patch will be posted here.

    • UPDATE 7/31/2006 - Now Available:

      • The ArcSDE DB2 and Informix downloads.

    Getting Help

    Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Patch. International sites, please contact your local ESRI software distributor.


Download ID:1171

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options