How To: Configure a GTCO SUPER L II Digitizer

Procedure

Summary

Steps to configure a GTCO SUPER L II digitizer.

Procedure

1. Make sure the dip switches are set like this:

Switch 1:		Switch 2:		Switch 3:

1 - off			1 - on			1 - off
2 - off			2 - on			2 - off
3 - on			3 - on			3 - off
4 - on			4 - on			4 - off
5 - off			5 - on			5 - off
6 - off			6 - off			6 - off
7 - off			7 - off			7 - off
8 - on			8 - off			8 - on

2. Run CON-DIG at the Arc prompt like this:

CON-DIG GTCO5 x 9600 N 8 1
        |     | |    | | |_ stop bits
        |     | |    | |___ data bits
        |     | |    |_____ parity
        |     | |__________ baud rate
        |     |____________ port #
        |__________________ format file

3. Run the DIGTEST utility to make sure the digitizer is working correctly.

Article ID:000001714

Software:

Legacy Products

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options

Configure a GTCO SUPER L II digitizer

Procedure

Discover more on this topic