Skip to Content

Patches and updates

ArcSDE 9.2 ST_Geometry Spatial Index Patch

Published: August 28, 2008

Resumen

This patch resolves an issue with re-creating the spatial index on the Adds table of a versioned ST_Geometry feature class after the spatial index has been dropped then re-added to the feature class.

Descripción

ArcSDE 9.2 Service Pack 6 must be installed before you can install this Patch. It is strongly recommended that you back up your database including all previous ArcSDE system tables and user layer data before upgrading your ArcSDE installation. Install this Patch using your SDE user account.

REQUIRED INSTALL STEP: If you connect to ArcSDE 9.2 via an Application Server and Direct Connect connections using ArcGIS 9.2, ArcIMS 9.2, or ArcView GIS 3.3 with DBA 2.1f make sure you also see ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

ArcSDE Server Install for UNIX

UNIX Installation Notes:

  • To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which service packs have been installed. The PatchFinder utility searches for the following ArcGIS products.

    • ArcGIS Engine Developer Kit for C++
      ArcGIS Engine Developer Kit for the Java Platform
      ArcGIS Engine Runtime
      ArcGIS Server for the Java Platform
      ArcIMS
      ArcIMS Web ADF for the Java Platform
      ArcInfo Workstation
      ArcReader
      ArcSDE

    Extract the tar file by typing:

    % tar xvf PatchFinder.tar

    Run the utility by typing:

    % ./PatchFinder

Installation Steps:

During installation, you can either save the original 9.2 files or overwrite them. If you choose to save them, make sure you have enough disk space. The disk space requirements, for each platform, are displayed during the installation process.

  1. Download the appropriate tar file to a location other than $SDEHOME:

  2. Stop your current ArcSDE service.
  3. % sdemon -o shutdown

    NOTE (AIX only): You must remove any inactive libraries that are loaded into memory before proceeding to the next step. Not doing so will result in an installation error. To remove them, as ROOT user, type:

    # /usr/sbin/slibclean

    (Optional) To list the libraries loaded into memory, as ROOT user, type:

    # /usr/sbin/genkld

    For further information on the slibclean and genkld commands please refer to your AIX system administrator documentation.

  4. Extract the specified tar file by typing:
  5. % tar -xvf sde92-stgeompatch-<Database>-<Platform>.tar

  6. Start the installation by typing:
  7. % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  8. Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:

    • ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY PROCEDURE
      CREATE ANY SEQUENCE
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE PROCEDURE
      CREATE PUBLIC SYNONYM
      CREATE SESSION
      CREATE SEQUENCE
      CREATE TABLE
      CREATE TRIGGER
      CREATE TYPE
      DROP ANY INDEX
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      DROP ANY TABLE
      DROP ANY VIEW
      DROP PUBLIC SYNONYM
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      SELECT ANY TABLE
      UNLIMITED TABLESPACE
  9. To upgrade, run sdesetup. Failure to do so may cause problems in starting the service or with connecting to the service. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:
  10. %sdesetup -o upgrade -d <ORACLE9I|ORACLE10G> –u <DB_Admin_User> –p <DB_Admin_password>

    After the upgrade completes, you may revoke the following permissions from the SDE user account:
    • ANALYZE ANY
      ALTER ANY INDEX
      ALTER ANY TABLE
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE TYPE
  11. Start your service again.
  12. % sdemon -o start

  13. Only for users who have Oracle and ArcSDE installed on separate machines.
  14. If you are installing ArcSDE on a different server than Oracle, you must copy the shared libraries used by EXTPROC to the Oracle server. These libraries include st_shapelib plus the Geometry library and the Projection Engine library. (The names of these files vary depending on what operating system (OS) you are using.) Be sure the files copied to the Oracle server are designed to run on the operating system of the Oracle server. For example, if ArcSDE is installed on a Linux machine, but Oracle is installed on a Solaris machine, the library files you copy to the Oracle server must be for Solaris. To get the files for different operating system, you can install the software files of the ArcSDE component on the Oracle server, creating the SDEHOME files, and delete everything but the three required library files.

    Library Name OS-dependent file names
    st_shapelib st_shapelib.dll, libst_shapelib.so (.sl for HP, _64.so for IBM64)
    Projection Engine pe.dll, libpe.so (.sl for HP, _64.so for IBM64)
    Geometry sg.dll, libsg.so (.sl for HP, _64.so for IBM64)

    These files can be found in the bin (Windows) or lib (UNIX/Linux) directory of SDEHOME after you've installed the ArcSDE component. You can copy these files to the %ORACLE_HOME%\lib (Windows) or $ORACLE_HOME/lib (UNIX/Linux) directory on the Oracle server, which is the default location that Oracle looks in for shared libraries. Or, you can leave these files where they were installed or move them into any directory that is accessible to the user that owns ORACLE_HOME.

  15. If you have more than one ArcSDE service, perform steps 1 through 8 for each of your ArcSDE services.

Server Install for Windows

  • Windows Installation Notes:

    • It is important to keep all versions of ArcGIS products installed on the same machine in sync to avoid any software conflicts.

      To find out what products are currently installed on your machine, download the ServicePackFinder92.exe utility and run it from your local machine. This utility provides a report detailing which ArcGIS products are currently installed on your machine. This will help determine which product Service Packs you should install on your machine. The report also details which service packs have been installed. The report is displayed when the utility is run and a servicepack.txt log file is created in your temp folder. The Service Pack Finder utility searches for the following ArcGIS products.

      • ArcGIS ArcReader
        ArcGIS Desktop (ArcView, ArcEditor, ArcInfo) Includes the ArcReader fixes for the ArcReader FEATURE.
        ArcGIS Desktop Developer Kit for the Microsoft .NET Framework, VB6, VBA and Visual C++
        ArcGIS Engine Developer Kit for C++, the Java Platform, the Microsoft .NET Framework, VB6 and Visual C++
        ArcGIS Engine Runtime
        ArcGIS Image Server
        ArcGIS Server for the Microsoft .NET Framework
        ArcGIS Server for the Java Platform
        ArcGIS Server Web ADF Runtime for the Microsoft .NET Framework
        ArcIMS
        ArcIMS Web ADF for the Microsoft .NET Framework
        ArcIMS Web ADF for the Java Platform
        ArcSDE

      NOTE (ArcIMS and ArcGIS Desktop users): If you use ArcIMS 9.2 or ArcGIS Desktop 9.2, you must also install ArcIMS 9.2 Service Pack 6 or ArcGIS 9.2 Service Pack 6 . For example, if you use ArcIMS 9.2 and ArcSDE 9.2, install both ArcIMS 9.2 Service Pack 6 and ArcSDE 9.2 Service Pack 6. Since ArcIMS 9.2, ArcSDE 9.2 and the ArcGIS 9.2 products share common DLLs, it is important to keep the software release versions in sync to avoid any software conflicts.

Installation Steps

  1. Make sure you have write access to the ArcSDE installation folder, that no one is using ArcSDE, and that the ArcSDE service is down.

    NOTE: If you do not shut down the ArcSDE service before installing this Service Pack, you will be prompted and required to reboot your server machine in order to successfully complete the Service Pack installation.

  2. Download the appropriate files to a location other than the ArcSDE installation folder:

  3. Double-click sde92-stgeompatch-<Database>-win.exe to start the install process.

  4. When Setup starts, follow the instructions on your screen.

  5. Before upgrading your Oracle instance, you must grant the following additional permissions to the SDE user in Oracle:
    • ALTER ANY INDEX
      ALTER ANY TABLE
      ANALYZE ANY
      CREATE ANY INDEX
      CREATE ANY PROCEDURE
      CREATE ANY SEQUENCE
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE PROCEDURE
      CREATE PUBLIC SYNONYM
      CREATE SESSION
      CREATE SEQUENCE
      CREATE TABLE
      CREATE TRIGGER
      CREATE TYPE
      DROP ANY INDEX
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      DROP ANY TABLE
      DROP ANY VIEW
      DROP PUBLIC SYNONYM
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      SELECT ANY TABLE
      UNLIMITED TABLESPACE
  6. To upgrade, run sdesetup. Failure to do so may cause problems in starting the service or with connecting to the service. Please go to the admin command guide under the %SDEHOME%\documentation folder for more information on using this command:
  7. c:\ sdesetup -o upgrade -d <ORACLE9I|ORACLE10G> –u <DB_Admin_User> –p <DB_Admin_password>
  8. After the upgrade completes, you may revoke the following permissions from the SDE user account:
    • ANALYZE ANY
      ALTER ANY INDEX
      ALTER ANY TABLE
      CREATE ANY INDEX
      CREATE ANY TRIGGER
      CREATE ANY VIEW
      DROP ANY INDEX
      DROP ANY TABLE
      DROP ANY VIEW
      DROP ANY PROCEDURE
      DROP ANY SEQUENCE
      EXECUTE ANY PROCEDURE
      SELECT ANY SEQUENCE
      CREATE INDEXTYPE
      CREATE LIBRARY
      CREATE OPERATOR
      CREATE TYPE
  9. As the SDE user, run the following command to restart the ArcSDE service:
    c:\sdemon -o start
  10. Only for users who have Oracle and ArcSDE installed on separate machines.
  11. If you are installing ArcSDE on a different server than Oracle, you must copy the shared libraries used by EXTPROC to the Oracle server. These libraries include st_shapelib plus the Geometry library and the Projection Engine library. (The names of these files vary depending on what operating system (OS) you are using.) Be sure the files copied to the Oracle server are designed to run on the operating system of the Oracle server. For example, if ArcSDE is installed on a Windows machine, but Oracle is installed on a Solaris machine, the library files you copy to the Oracle server must be for Solaris. To get the files for different operating system, you can install the software files of the ArcSDE component on the Oracle server, creating the SDEHOME files, and delete everything but the three required library files.

    Library Name OS-dependent file names
    st_shapelib st_shapelib.dll, libst_shapelib.so (.sl for HP, _64.so for IBM64)
    Projection Engine pe.dll, libpe.so (.sl for HP, _64.so for IBM64)
    Geometry sg.dll, libsg.so (.sl for HP, _64.so for IBM64)

    These files can be found in the bin (Windows) or lib (UNIX/Linux) directory of SDEHOME after you've installed the ArcSDE component. You can copy these files to the %ORACLE_HOME%\lib (Windows) or $ORACLE_HOME/lib (UNIX/Linux) directory on the Oracle server, which is the default location that Oracle looks in for shared libraries. Or, you can leave these files where they were installed or move them into any directory that is accessible to the user that owns ORACLE_HOME.

  12. If you have more than one ArcSDE service, perform steps 2 through 9 for each of your ArcSDE services.

ArcSDE SDK Install for UNIX

Installation Steps

  1. Download the appropriate tar file to a location other than ArcSDE SDK installation location:
  2. Oracle (32 bit Operating System)  
    Linux sde92-stgeompatch-sdk-lx.tar
    3 MB
       
    Oracle (64 bit Operating System)  
    HP64 sde92-stgeompatch-sdk-hp64.tar
    4 MB
    IBM64 sde92-stgeompatch-sdk-ibm64.tar
    4 MB
    Solaris64 sde92-stgeompatch-sdk-slrs64.tar
    4 MB
    Tru64 sde92-stgeompatch-sdk-tru64.tar
    4 MB

  3. Extract the specified tar file by typing:
  4. % tar -xvf sde92-stgeompatch-sdk-<Platform>.tar
  5. Start the installation by typing:
  6. % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

ArcSDE SDK Install for Windows

Installation Steps

  1. Make sure you have write access to the ArcSDE SDK installation folder.
  2. Download the appropriate files to a location other than the ArcSDE SDK installation folder:
  3. Double-click the appropriate executable to start the install process.
  4. When Setup starts, follow the instructions on your screen.

ESRI Products connecting to ArcSDE (Application and Direct Connect connections).

The client updates contained in ArcSDE 9.2 Service Pack 6 are also included in ArcIMS 9.2 Service Pack 6 and ArcGIS 9.2 Service Pack 6. This is necessary to maintain version compatibility between the client and the server applications.

  • UNIX

    1. If you connect to ArcSDE 9.2 using ArcGIS 9.2 Workstation on any supported Unix/Linux platform please follow the steps below to install this Service Pack to your ArcGIS 9.2 software installation directory:

      • Before you start, make sure you have write access to the installation directory then download the appropriate compressed tar file to that location:


      • Gunzip and extract the specified tar file for your platform. Ensure that the last letters of the file name are ".gz". Otherwise, the gunzip command will not work. At the UNIX prompt type:
        % cd <Workstation Installation Directory>/lib (i.e. cd $ARCHOME)
        % gunzip sde92-stgeompatch-esri-<Platform>.tar.gz
        % tar xvf sde92-stgeompatch-esri-<Platform>.tar

    Windows

    1. If you connect to ArcSDE 9.2 using any ArcGIS 9.2 client, for example ArcIMS 9.2 or ArcInfo Workstation 9.2, please follow the steps below to install this Patch to your ArcGIS 9.2 client library folder:

      • Before you start, make sure you have write access to the installation folder, then download the zip file to that location:


      • ArcIMS only, stop the ArcIMS Tasker, ArcIMS Monitor, ArcIMS Application Server (in that order).
      • Use WinZip to extract the new files from sde92-sp6-esri-win.zip to the appropriate installation folder, see list below:

        • ArcGIS Desktop, Server, Engine, Reader, or ArcView 9 - <installation-folder>\arcgis\bin
          ArcGIS Workstation - <installation-folder>\arcexe9x\bin

          Depending on the ArcIMS Setup features installed, the SDE client files could be located in one or more of the following locations:

          C:\Program Files\ArcGIS\bin
          C:\Program Files\ArcGIS\ArcIMS\IndexBuilder
          C:\Program Files\ArcGIS\ArcIMS\Metadata\Commands
          C:\Program Files\ArcGIS\ArcIMS\Server\bin
      • ArcIMS only, restart ArcIMS Application Server, ArcIMS Monitor and ArcIMS Tasker (in that order).

How to identify which Patch is installed

  • UNIX

    To find out what ArcGIS products are currently installed on your machine, download and extract the PatchFinder.tar and run PatchFinder utility from your local machine. This utility provides a report detailing which ArcGIS products and which servicepacks have been installed. The PatchFinder utility searches for thefollowing ArcGIS products.

    • ArcGIS Engine Developer Kit for C++
      ArcGIS Engine Developer Kit for the Java Platform
      ArcGIS Engine Runtime
      ArcGIS Server for the Java Platform
      ArcIMS
      ArcIMS Web ADF for the Java Platform
      ArcInfo Workstation
      ArcReader
      ArcSDE

    Extract the tar file by typing:

    % tar xvf PatchFinder.tar

    Run the utility by typing:

    % ./PatchFinder

    Windows

    To check for the presence of a Patch, for each file examine the File version information (right click, properties, version tab). With only a few exceptions, all files modified as part of a Patch distribution can be uniquely identified in this manner. The File version for this Patch should read:

    • 9.2.6.1271

Patch Updates

Check Online Support Center periodically for the availability of additional Service Packs. New information about this patch will be posted here.

August 3, 2009: Changed instructions on how to identify patched files for Windows.

Getting help

Domestic sites, please contact ESRI Technical Support at 1-888-377-4575, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.



Download ID:1442

Get help from ArcGIS experts

Contact technical support

Download the Esri Support App

Go to download options