ArcGIS 10.2 GeoEvent Processor Patch 1 for Server

Esri announces ArcGIS 10.2 GeoEvent Processor Patch 1 for Server. With Google Chrome version 29.0.1547.57m or greater, the GeoEvent Processor Manager may not display properly for administrators. With this patch the Manager will properly display in current versions of Google Chrome. We recommend this update be applied at your earliest convenience.

TFS28495 - GeoEvent Processor Manager does not display the GeoEvent Definition or Logs pages with Google Chrome version 29.0.1547.57m or greater.

Under <ArcGIS GeoEvent Processor install location>\GeoEventProcessor\manager files have been upgraded to Dojo 1.6.2.

ArcGIS 10.2 GeoEvent Processor for Server must be installed before you can install this patch.

Installation Steps:

1. Download the patch to a location other than your ArcGIS installation location.

   		Checksum (Md5)
   ArcGIS GeoEvent Processor for Server	ArcGIS-10.2-GeoEventProcessor-Patch1.msp	68CD7BDF44E3702AEFD8290B462BD9F7

   
   
2. Make sure you have write access to your ArcGIS installation location.
3. Double-click ArcGIS-10.2-GeoEventProcessor-Patch1.msp to start the install process.
   Note: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:
   
   msiexec.exe /p <location of patch>\ArcGIS-10.2-GeoEventProcessor-Patch1.msp
   

ArcGIS 10.2 GeoEvent Processor for Server must be installed before you can install this patch.

Installation Steps:

1. Download the patch to a location other than your ArcGIS installation location.

   		Checksum (md5)
   ArcGIS GeoEvent Processor for Server	ArcGIS-10.2-GeoEventProcessor-Patch1.tar.gz	672595E92B4885A51A77CC3445730232

   
   
2. Login as the ArcGIS Server user and make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.
3. Extract the specified tar file by typing:
   
   % tar -xvfz ArcGIS-10.2-GeoEventProcessor-Patch1.tar.gz
4. Copy the GeoEventServiceDesigner.exe files from ./ArcGISGeoEventProcessor/Support/ to a Windows machine
   Note: The GeoEventSimulator and GeoEvent Service Designer need to be used on a Windows machine.
   
5. Run the Installation by typing:
   
   % ./ArcGISGeoEventProcessor/Patch.sh
   
   

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list products, hot fixes, and patches installed on your local machine.

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing thispatch. International sites, please contact your local Esri software distributor.