ArcGIS 10.2 for (Desktop, Engine, Server) Landsat 8 Patch

Date Published: 12-31-2013

Summary:

This patch adds support for Landsat 8 imagery, as well as fixing several quality and performance issues related to raster and imagery data. ArcGIS users wishing to work with Landsat 8 imagery should apply this patch.

Description:

Introduction

Esri® announces the ArcGIS 10.2 for (Desktop, Engine, Server) Landsat 8 Patch. This patch adds support for Landsat 8 imagery, as well as fixing several quality and performance issues related to raster and imagery data. ArcGIS users wishing to work with Landsat 8 imagery should apply this patch. It deals specifically with the issues listed below under Issues Addressed with this Patch.

Issues Addressed with this patch


Files Installed in this patch


Under the <ArcGIS Desktop / Engine / Server Installation>\bin folder:
    3DToRasterFunctions.dll
    arcgisscripting.pyd
    FileGDB.dll
    FunctionRasterDB.dll
    FunctionRasterDatasetUI.dll (Desktop Only)
    GdalRasterDB.dll
    GdbCore.dll
    GdbCoreLib.dll
    GdbNetwork.dll
    GPCoreFunctions.dll
    ImageServer.dll
    MosaicDB.dll
    OleFDB.dll
    RasterCoreLib.dll
    RasterDatasetUI.dll (Desktop Only)
    RasterDB.dll
    sde.dll
    SdeFDB.dll
Under the Linux <ArcGIS Engine Installation>/bin folder:
    3dtorasterfunctions.rsb
    arcgisscripting.rsb
    arcgisscripting.so
    filegdb.rsb
    functionrasterdb.rsb
    gdalrasterdb.rsb
    gdbcorelib.rsb
    gdbcore.rsb
    gpcorefunctions.rsb
    gdbnetwork.rsb
    imageserver.rsb
    lib3dtorasterfunctions.so
    libfilegdb.so
    libfunctionrasterdb.so
    libgdalrasterdb.so
    libgdbcorelib.so
    libgdbcore.so
    libgdbnetwork.so
    libgpcorefunctions.so
    libimageserver.so
    libmosaicdb.so
    librastercorelib.so
    librasterdb.so
    libsdefdb.so
    mosaicdb.rsb
    rastercorelib.rsb
    rasterdb.rsb
    sdefdb.rsb

Installing this patch on Windows

Installation Notes:

System Administrators: A technical paper is available that discusses the enterprise deployment of ArcGIS 10.2 setups using Microsoft Systems Management Server (SMS), System Center Configuration Manager (SCCM), and Group Policy, including additional system requirements, suggestions, known issues, and Microsoft Software Installation (MSI) command line parameters. Deployment in a lockdown environment is also covered. ArcGIS 10.2 Enterprise Deployment.

Installation Steps:

ArcGIS 10.2 for Desktop, Engine, or Server must be installed before installing this patch.

  1. Download the appropriate file to a location other than your ArcGIS installation location.

  2.     Checksum (Md5)
    ArcGIS for Desktop ArcGIS-102-DT-LS8-PatchB.msp 63E810F970422557FC16C4B2AB380BC0
         
    ArcGIS Engine ArcGIS-102-E-LS8-PatchB.msp C192C7E866780C5EA55AB4193E016B6E
         
    ArcGIS for Server ArcGIS-102-S-LS8-PatchB.msp 3A59E6558B5CA88F4315A767F3127CC1

  3. Make sure you have write access to your ArcGIS installation location.

  4. Double-click ArcGIS-102-<Product>-LS8-PatchB.msp to start the setup process.

    NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:

    msiexec.exe /p [location of Patch]\ArcGIS-102-<Product>-LS8-PatchB.msp


Installing this patch on Linux

Installation Notes:

System Administrators: A technical paper is available that discusses the enterprise deployment of ArcGIS 10.2 setups using Microsoft Systems Management Server (SMS), System Center Configuration Manager (SCCM), and Group Policy, including additional system requirements, suggestions, known issues, and Microsoft Software Installation (MSI) command line parameters. Deployment in a lockdown environment is also covered. ArcGIS 10.2 Enterprise Deployment.

Installation Steps:

Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder.

ArcGIS 10.2 for Engine or Server must be installed before installing this patch.

  1. Download the appropriate file to a location other than your ArcGIS installation location.


        Checksum (Md5)
    ArcGIS Engine ArcGIS-102-E-LS8-PatchB-lx.tar 2D2891FAB12F9C374DC5AA36E66081B7
         
    ArcGIS for Server ArcGIS-102-S-LS8-PatchB-lx.tar 33CEB65FA5B9581C96D1485890E08777

  2. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.

  3. Extract the specified tar file by typing:

    % tar -xvf ArcGIS-102-<Product>-LS8-PatchB-<Platform>.tar

  4. Start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

Patch Updates

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

December 31, 2013: This patch was updated on December 31 to resolve an issue requesting the extents of a Geodatabase feature class through python (NIM097252). Customers who downloaded this patch prior to December 13 please install the latest version of the patch to update the patch.

How to identify which ArcGIS products are installed

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

Getting Help

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.