English

ArcGIS Runtime SDK 10.2.6 for Qt Patch

Summary

This patch addresses stability and security issues with ArcGIS Runtime SDK 10.2.6.

Description

Introduction

Esri® announces ArcGIS Runtime SDK 10.2.6 for Qt Patch. This patch addresses stability and security issues with ArcGIS Runtime SDK 10.2.6. It deals specifically with the issues listed below under Issues Addressed with this Patch

Issues Addressed with this patch

  • Upgraded OpenSSL to version 1.0.2g.
  • Added support for the LatLon grid type in the Grid class.
  • Added an anchor mode enumeration for GraphicsLayer to set whether symbol rotation is applied and then the offset, or the offset is applied and then the rotation.
  • The Route property totalKilometers returned the distance in miles instead of kilometers.
  • The layerStatusChanged signal for ArcGISTiledMapServiceLayer never fires once it's initialized, it only fires when it's initializing.
  • An app could crash when geocoding with ServiceLocator and a secured service.
  • BUG-000089847 MessageProcessor would not highlight the selected military symbol.
  • BUG-000095253 - Feature edits would not be applied to a GeodatabaseFeatureServiceTable in some cases.
  • ENH-000090236 - Changed MessageGroupLayer to emit the layerCreateComplete signal immediately after it is initialized in the case where it contains no layers.

Installing this patch on Windows

Installation Steps:

ArcGIS Runtime SDK 10.2.6 for Qt must be installed before installing this patch.

  1. Download the file to a location other than your ArcGIS Runtime SDK for Qt installation location.

  2.   Checksum (Md5)
         
          ArcGIS Runtime SDK for Qt ArcGIS-1026-SDKQT-RSQ-Patch.msp 5BBC19F7F0855F7986237822624DA961
         
  3. Make sure you have write access to your ArcGIS Runtime SDK for Qt installation location.

  4. Double-click ArcGIS-1026-SDKQT-RSQ-Patch.msp to start the setup process.

    NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:

    msiexec.exe /p [location of Patch]\ArcGIS-1026-SDKQT-RSQ-Patch.msp

  5. After the patch has been installed, you will need to run the ArcGIS Runtime SDK 10.2.6 for Qt post-installer. The default location of the post-installer, QtPostInstall.exe, is C:\Program Files (x86)\ArcGIS SDKs\Qt10.2.6\tools\post-installer.

Installing this patch on Linux

Installation Steps:


Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder.

ArcGIS Runtime SDK 10.2.6 for Qt must be installed before installing this patch.

  1. Download the appropriate file to a location other than your ArcGIS Runtime SDK for Qt installation location.

      Checksum (Md5)
         
          ArcGIS Runtime SDK for Qt
          Linux
    ArcGIS-1026-SDKQT-RSQ-Patch-linux.tar 33CBA45347E0A76EF98271AB71647574
         
  2. Make sure you have read-write-execute (rwx) access to your ArcGIS Runtime SDK for Qt installation location.

  3. Extract the specified tar file by typing:

    % tar -xvf ArcGIS-1026-SDKQT-RSQ-Patch-linux.tar

  4. From within the extracted folder, start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  5. After the patch has been installed, you will need to run the ArcGIS Runtime SDK 102.6 for Qt post-installer. The default location of the post-installer, QtPostInstall, is /home/arcgis/runtime_sdk/qt10.2.6.


Installing this patch on OS X

Installation Steps:


Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder.

ArcGIS Runtime SDK 10.2.6 for Qt must be installed before installing this patch.

  1. Download the appropriate file to a location other than your ArcGIS installation location.

      Checksum (Md5)
         
         ArcGIS Runtime SDK for Qt
          Mac OS X
    ArcGIS-1026-SDKQT-RSQ-Patch-osx.tar 3A3A968240AE3F9CF6CF22E47926C7DC
         
  2. Make sure you have read-write-execute (rwx) access to your ArcGIS Runtime SDK for Qt installation location.

  3. Extract the ArcGIS-1026-SDKQT-RSQ-Patch-osx.tar file to your current location by typing:

    % tar -xvf ArcGIS-1026-SDKQT-RSQ-Patch-osx.tar

  4. From within the extracted folder, start the installation by typing:

    % ./applypatch

    This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

  5. After the patch has been installed, you will need to run runtimeSDKPatch1026.sh from the ArcGIS Runtime SDK installation location; default location at ~/arcgis/qt10.2.6/

  6. Run the ArcGIS Runtime SDK 10.2.6 for Qt post-installer. The default location of the post-installer, QtPostInstall.exe, is ~/arcgis/Qt10.2.6/tools/post-installer.

Patch Updates

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

Getting Help

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.