ArcGIS 10.3.1 for (Desktop / Server) Legacy Commercial Satellite NITF Patch

• BUG-000091783 - This fix addresses issues where some legacy commercial satellite imagery in NITF format aren't presented to the user as an ArcGIS Raster Product or aren't recognized as an ArcGIS Raster Type. This enhancement applies to non-ncdrd compliant NITF commercial satellite imagery (e.g. legacy Ikonos, Quickbird, GeoEye-1, WorldView-1, WorldView-2, etc.).

ArcGIS 10.3.1 for Desktop or Server and the ArcGIS 10.3.1 for (Desktop, Server) Raster Type Patch must be installed before installing this patch.

1. Download the appropriate file to a location other than your ArcGIS installation location.
   
   

   ArcGIS 10.3.1		Checksum (Md5)
   ArcGIS for Desktop	ArcGIS-1031-DT-LCSN-Patch.msp	864765BFBD05463147FF3AF0DA082D7F
   ArcGIS for Server	ArcGIS-1031-S-LCSN-Patch.msp	21C4F95E4CA07663A72A53FDE483E6EC

   
   
2. Make sure you have write access to your ArcGIS installation location.
3. Double-click ArcGIS-1031-<Product>-LCSN-Patch.msp to start the setup process.
   
   NOTE: If double clicking on the MSP file does not start the setup installation, you can start the setup installation manually by using the following command:
   
   
   msiexec.exe /p [location of Patch]\ArcGIS-1031-<Product>-LCSN-Patch.msp
   

Complete the following install steps as the ArcGIS Install owner. The Install owner is the owner of the arcgis folder.

ArcGIS 10.3.1 for Server and the ArcGIS 10.3.1 for (Desktop, Server) Raster Type Patch must be installed before installing this patch.

1. Download the appropriate file to a location other than your ArcGIS installation location.
   
   
   

   ArcGIS 10.3.1		Checksum (Md5)
   ArcGIS for Server	ArcGIS-1031-S-LCSN-Patch-lx.tar	9B82C57FFDC5E4CA9B4D29EF7DDB4FB9

   
   
2. Make sure you have write access to your ArcGIS installation location, and that no one is using ArcGIS.
3. Extract the specified tar file by typing:
   
   
   % tar -xvf ArcGIS-1031-S-LCSN-Patch-lx.tar

4. Start the installation by typing:
   
   
   % ./applypatch
   
   
   This will start the dialog for the menu-driven installation procedure. Default selections are noted in parentheses ( ). To quit the installation procedure, type 'q' at any time.

Check the Patches and Service Packs page periodically for the availability of additional patches. New information about this patch will be posted here.

To determine which ArcGIS products are installed, choose the appropriate version of the PatchFinder utility for your environment and run it from your local machine. PatchFinder will list all products, hot fixes, and patches installed on your local machine.

Domestic sites, please contact Esri Technical Support at 1-888-377-4575, if you have any difficulty installing this patch. International sites, please contact your local Esri software distributor.