English

PLTS for ArcGIS 9.2 Aeronautical Service Pack 3

Summary

This Service Pack contains performance improvements and maintenance fixes. Please download and install this required Service Pack at your earliest convenience.

Description

Introduction


This service pack will upgrade PLTS for ArcGIS 9.2 Aeronautical Solution to version 9.2.0.3 (build 708). In addition to the issues addressed, the service pack introduces an updated Aeronautical Information System (AIS) data model and data dictionary as well as significant enhancement to the following tools: Line Bypass can now be used with the AIS model and Profile View now works with multiple transitions.

Note: You must install ArcGIS 9.2 Service Pack 3 or greater before installing this service pack.

Note: You must install PLTS for ArcGIS 9.2 Foundation Service Pack 3 or greater before installing this service pack.

Issues Addressed with this Service Pack


1191 Chart Leads not calculated correctly
1194 Update/Create chart leads should recognize an AACDTD chart and make chart leads blue
1198 Cannot begin profile from multiple points/verticals
1201 Update Anno removes most or all arrowheads
1208 Add a Select All button to the Aero Commander dialog
1219 PLTS Feature Builder Enhancement - Keyhole function needs a check for similar buffer parameters
1220 PLTS Feature Builder Keyhole Functions do not populate Label or Description fields in table
1288 Make line bypass work for AIS model
2503 Load error for AirBoundaryAreas when name has apostrophe
2511 Change Reporter-incorrect status reported for attribute modification on oracle SDE
2640 Geometry change appears when there is only an Attribute change
2642 All charts listed in Charts to Process
3179 Notes feature class needs TerminalProcedure_ID field
3554 Typo in Aero desktop help-Visually depicting cartographic exceptions topic
3573 Procedure Leg PI: Some set of parameters produce incorrect results
3575 Change Reporter GP tool - Not displaying Attributed classes
3632 Error opening CSA L-1 MXD
3646 Need field to store alternate minima data
3704 CRC_Txt data type is an integer
3705 Profile tool not setup to work with SP2 model.
3711 Letter position not aligned for Aero scale bar for bottom orientation
3712 Only point features need to be available in dropdown list of reporting point table
3718 Feature count column does not appear on opening the Batch Masking tool
3734 Unable to create Annotation if 9.1 was installed previously
3736 Unable to Generate Waypoint Anno
3740 Chart Leads Calculator Missing Status Bar
3757 Aeronautical Load not working correctly
3871 Error received when trying to copy scale bars from one MXD to another
3955 Create Feature Linked Annotation not successfully running after a string of edits/other tools ran.
3956 "Batch Masking tool results N/A after running string of previous tools, restart mxd and is ok. "
3960 Exception raised when a non featured linked Anno is selected and click on Anno Abbreviate
3980 Incorrect values in Code_Cat_Ldg_Aid Domain
3981 Update AIS Data Dictionary for Code_Cat_Ldg_Aid
4960 DBSynch is not working consistently
11781 Multi-NAVAID Anno displaying with only three letter ident
11783 AIS Data Model-Airspace Weather Domain
11785 Create FLA is not populating Mapid_txt field on new annotation on FAA Oracle DB
11797 AIS Data Model-ADHPThreshold to ILS/MLS Relationship
11799 AIS Data Model-Holding Pattern domains incorrect
18014 PLTS->Properties throws an exception
18895 Create Feature-linked anno relies upon the AOI chosen in the PCat Viewer
18903 Range Marker Documentation - Statement contradicts with the executable
18939 Modify Margin Documentation- Statement needs to be changed
18940 See Spot Color not mapping NRS waypoints correctly
19157 Unable to create Batch Chart Leads because of error
19166 Options on Update Anno window enabled and disabled at wrong times
19173 "Make Chart Type utilities work with any setup for H, L, B"
19325 Need rel class from Terminal Procedure to Surface Area for the TLOF subtype to IAP.
19334 Error in aero load log file when wpt_mca table doesn't exist in the changefile
19339 Profile view help should be updated saying profile view honors definition query on TerminalProcedure
19409 CKB generated from PLTS properties not valid
19412 Cannot generate anno for collocated waypoints
19415 Line Bypass documentation needs to be updated
19607 Profile View does not show DME arc when it changes its course with Arc Function
19609 Multiple Transition doe not show text Elements and arrows
19611 Profile View is not moving if the start profile view is edited by moving the transitions in it
19612 Missed Approach point is getting created little far from runway.
19613 Profile Selection box should be sorted based on Airport name not on Client Key ID
19630 Update AIS Data dictionary
19646 Airspace carto features are deleted during the load
19654 Cut Line Tool cutting too far back on EEA 18
19718 Create Feature linked annotation help needs to be updated
19728 Documentation update for profile view schema change
20989 Incorrect screen capture for extraction queries
21007 Line Bypass needs to be added to the AIS Editing toolbar.
22014 Documentation needs to be updated to reflect that the Line Bypass tool is now enabled for AIS.
22290 Line Bypass documentation should mention using a projected coordinate system.
22434 Exception thrown when exclude features and then run carto commander

Files Installed with this service pack


o New AERONAUTICAL.9.2.3.xml
o New CKB_Base_GX.xml
o New DOD_Terminals.style
o New ResAnnoAbbrIt.dll
o Replace administering_the_product_catalog.chm
o Replace administering_the_product_catalog.lif
o Replace Aeronautical_Settings.xml
o Replace AIS_Charting_data_dictionary.lif
o Replace ais_data_dictionary.lif
o Replace foundationInterfaces.olb
o Replace ResAeroAnno.dll
o Replace ResPCatControlProj.dll
o Replace working_with_the_product_catalog.chm
o Replace working_with_the_product_catalog.lif
o Replace Aero_SplitCallout.dll
o Replace AeroAirspaceTools.dll
o Replace AeroAnchorPointMover.dll
o Replace AeroAnno.dll
o Replace AeroAnnoRotation.dll
o Replace AeroATSAnnoHider.dll
o Replace AeroATSRouteHider.dll
o Replace AeroBoundaries.dll
o Replace AeroCharting.dll
o Replace AeroCommander.dll
o Replace AeroDBSynch.exe
o Replace AeroDebugEditExt.dll
o Replace AeroEditEnv.dll
o Replace AeroElements.dll
o Replace aeroInterfaces.olb
o Replace AeroLibrary.dll
o Replace aeronautical_maintenance_production_procedures.chm
o Replace aeronautical_maintenance_production_procedures.lif
o Replace aeronautical_production_procedures.chm
o Replace aeronautical_production_procedures.lif
o Replace Aeronautical_TransSpec.mdb
o Replace AeroPostLoad.dll
o Replace AeroRegister.exe
o Replace AeroUpdate.dll
o Replace AirBoundaryLines.dll
o Replace AIS.xml
o Replace ais_data_dictionary.chm
o Replace AIS_GX.xml
o Replace AISCharting.xml
o Replace AISCharting_GX.xml
o Replace AIXMLoader.dll
o Replace AIXMProvider.dll
o Replace AnnoAbbrIt.dll
o Replace BufferedPolygonRenderer.dll
o Replace CartoFeatMigration.dll
o Replace ChangeReporter_aeronautical.xml
o Replace CreateCartoFeatures.dll
o Replace creating_features_with_feature_builder.chm
o Replace creating_features_with_feature_builder.lif
o Replace DoD.xml
o Replace DoD_GX.xml
o Replace DVOF.dll
o Replace Enroute.style
o Replace ESRI.PLTS.Aero.Desktop.dll
o Replace ESRI.PLTS.Aero.Desktop.pdb
o Replace ESRI.PLTS.Aero.Engine.dll
o Replace ESRI.PLTS.Aero.Engine.Interfaces.dll
o Replace ESRI.PLTS.Aero.Engine.pdb
o Replace ESRI.PLTS.Foundation.Desktop.dll
o Replace ESRI.PLTS.Foundation.Desktop.pdb
o Replace ESRI.PLTS.Foundation.Engine.dll
o Replace ESRI.PLTS.Foundation.Engine.Interfaces.dll
o Replace ESRI.PLTS.Foundation.Engine.pdb
o Replace ExportLizard.dll
o Replace ExportMap.dll
o Replace HideMidSegAnno.dll
o Replace HideShowAnno.dll
o Replace Mabas.dll
o Replace MaskingToggle.dll
o Replace MetaGDBImporter.dll
o Replace mpsAeroElements.dll
o Replace MultiAirZones.dll
o Replace MultiFeatures.dll
o Replace MultiNavaids.dll
o Replace NGAChangesReporter.exe
o Replace OverflowBox.dll
o Replace PCatControl.ocx
o Replace PLTS_Aeronautical_AIS_05.ttf
o Replace plts_aeronautical_solution.chm
o Replace plts_aeronautical_solution.lif
o Replace plts_aeronautical_tools.chm
o Replace PLTS_Aeronautical_Tools.tbx
o Replace PointOffsetRenderer.dll
o Replace PointOnOffRoute.dll
o Replace RangeMarkers.dll
o Replace RASOverflowBox.dll
o Replace ReportPointIndex.dll
o Replace ResAeroAirspaceTools.dll
o Replace ResAeroAnchorPointMover.dll
o Replace ResAeroAnnoRotation.dll
o Replace ResAeroATSAnnoHider.dll
o Replace ResAeroATSRouteHider.dll
o Replace ResAeroBoundaries.dll
o Replace ResAeroCommander.dll
o Replace ResAeroDBSynch.dll
o Replace ResAeroDebugEditExt.dll
o Replace ResAeroEditEnv.dll
o Replace ResAeroLibrary.dll
o Replace ResAeroPostLoad.dll
o Replace ResAirBoundaryLines.dll
o Replace ResAIXMLoader.dll
o Replace ResAIXMProvider.dll
o Replace ResBufferPolyRenderer.dll
o Replace ResCartoFeatMigration.dll
o Replace ResCreateCartoFeatures.dll
o Replace ResDVOF.dll
o Replace ResExportLizard.dll
o Replace ResExportMap.dll
o Replace ResHideMidSegAnno.dll
o Replace ResHideShowAnno.dll
o Replace ResizeAnnotation.dll
o Replace ResMabas.dll
o Replace ResMaskingToggle.dll
o Replace ResMetaGDBImporter.dll
o Replace ResmpsAeroElements.dll
o Replace ResMultiAirZones.dll
o Replace ResMultiFeatures.dll
o Replace ResMultiNavaids.dll
o Replace ResNGAChangesReporter.dll
o Replace ResOverflowBox.dll
o Replace ResPointOffsetRenderer.dll
o Replace ResPointOnOffRoute.dll
o Replace ResRangeMarkers.dll
o Replace ResRASOverflowBox.dll
o Replace ResReportPointIndex.dll
o Replace ResResizeAnnotation.dll
o Replace ResRotateToGrid.dll
o Replace ResRouteProcessingTool.dll
o Replace ResRouteRenderer.dll
o Replace ResSUARenderer.dll
o Replace ResTestAnnoGeometry.dll
o Replace ResUCOverAndUp.dll
o Replace RotateToGrid.dll
o Replace RouteProcessingTool.dll
o Replace RouteRenderer.dll
o Replace SUARenderer.dll
o Replace TestAnnoGeometry.dll
o Replace TestAnnoGeometry.dll
o Replace UCOverAndUp.ocx

Installing the Service Pack



1. You must have administrator privileges and ensure that ArcMap is not currently open.

2. The CD or network location PLTS was originally installed from must be available. For instance, if PLTS was installed from a CD, the CD must be available during the service pack install. Copy the service pack to a local folder and have the PLTS software CD in the CD drive while installing the service pack. If PLTS was installed from a network location the location must be available during the service pack install.

3. Double-click the PLTSAeronautical92_SP3.msp and follow the installation instructions.

Note: If the .msp extension is currently being used by another program and double clicking the .msp does not start the install process the service pack can be run from the command line.


Launching the service pack from command line:

1. At a DOS command prompt, type 'msiexec.exe' to see if msiexec.exe can be found without specifying its full path.

2. If Step 1 returns a message box from the Windows Install, proceed to Step 3. If it is not found, search your computer for 'msiexec.exe', usually found in the system32 folder, and note the full path when found.

3. At a DOS command prompt use the following syntax to run the .msp file directly:

C:>\path\msiexec.exe /p path\.msp

Example:
C:>\msiexec.exe /p C:\temp\PLTSFoundation92_SP3.msp

An article on command line installations can be found on the ESRI support site at:
HowTo: Install a .msp file that is not recognized as a patch file


Service Pack and Patch Updates


Check Online Support Center periodically for the availability of additional service packs and patches.

Getting Help


Domestic sites, please contact ESRI Technical Support at 909.793.3774, if you have any difficulty installing this Service Pack. International sites, please contact your local ESRI software distributor.

Download

Supporting Files :